🔍
AUTOOL SDT102 Smoke Tester
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
  1. AUTOOL SDT102 Smoke Tester
  2. AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
  3. AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
  4. AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
  5. AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
  6. AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
  7. AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
  8. AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
  9. AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
  10. AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY
  11. AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY

AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY

US$79.00

Key Features
  • Built-In Pump Gauge
  • Wide Leak Coverage
  • Overheat Protection
Key Features
☰ REQUEST BULK / B2B QUOTERequest B2B Quote
Secure checkoutFast supportBulk ready
AUTOOL SDT102

Product Overview

The AUTOOL SDT102 smoke leak detector is a compact and lightweight automotive smoke tester for quick low-pressure leak detection in EVAP, intake, exhaust, crankcase, engine airtightness, vacuum, and low-pressure turbo systems. With a built-in air pump and pressure gauge, it helps diagnose leaks without an extra air compressor. It works from a DC 12V vehicle battery and is suitable for cars, motorcycles, ATVs, snowmobiles, off-road vehicles, light trucks, and speedboats.

Bomba de aire integrada Pressure Gauge 12V Battery EVAP / Vacuum
0.1-0.15MPaPresión nominal
48WPotencia nominal
1.6kgMain Unit
3 YearsWarranty
AUTOOL SDT102 smoke leak detector main product image Haz clic para ampliar
AUTOOL SDT102 smoke tester product detail image Haz clic para ampliar
Antes de pedir y usar

Antes de pedir y usar

Review the 12V power requirement, testing oil rule, refill method, operating time limit, A/C testing limit, and hot-surface warning before using the SDT102 smoke machine for vacuum leaks.

Requiere batería de 12V

The SDT102 automotive smoke tester must be connected to a DC 12V vehicle battery to operate. Confirm correct polarity before use.

Aceite de prueba no incluido

Due to logistics restrictions, testing oil is not included. Use liquid paraffin or baby oil purchased locally as the testing fluid.

Añadir solo 10-15ml

Fill 10-15ml testing oil before use. Do not add more than 15ml at a time, because internal space is needed for smoke generation.

Refill When Smoke Becomes Thin

Only refill when the smoke becomes thin. Always drain the remaining test oil before adding fresh testing oil.

Límite de uso de 8 minutos

Do not operate the smoke leak detector continuously for more than 8 minutes. Allow the unit to rest between uses.

A/C Direct Test Not Supported

SDT102 cannot directly pressure-test automotive A/C systems. It can only assist with segmented A/C pipeline checks under proper conditions.

Recordatorio de seguridad

  • The intelligent protection system stops operation when the internal temperature exceeds 75°C. Wait for the unit to cool before restarting.
  • La sección redonda metálica del probador de humo puede calentarse durante el funcionamiento. Evite el contacto directo para prevenir quemaduras.
  • No rellene el aceite de prueba mientras el comprobador de humo esté en funcionamiento.
  • If too much oil is added accidentally, drain some oil out before operation; the extra oil can be reused next time.
Key Features

Key Features

SDT102 is designed for fast and simple automotive smoke leak detection with an integrated pump, pressure gauge, EVAP support, broad low-pressure system coverage, and smart protection.

Pressure Gauge Leak Check

Use the pressure gauge to monitor pressure changes and quickly assess whether the tested pipeline may have leakage.

Bomba de aire integrada

No external air compressor is required. The built-in pump saves setup time and makes SDT102 easier for DIY and workshop use.

EVAP Detection

Supports EVAP leak detection and is compatible with American cars from 1996+ when used with proper EVAP service access tools.

Wide Low-Pressure Coverage

Supports common low-pressure checks for intake, exhaust, crankcase, engine airtightness, vacuum, pipe fittings, and low-pressure turbo systems.

Smart Protection

Overheat and freeze protection help protect the machine. The unit supports low-temperature work down to -20°C under proper conditions.

Compact Interface

The body integrates the power interface, smoke output, oil filler, pressure gauge, handle, and operation controls in a compact structure.

AUTOOL SDT102 built-in air pump feature image Haz clic para ampliar
AUTOOL SDT102 pressure gauge leak check image Haz clic para ampliar
AUTOOL SDT102 EVAP and system leak detection image Haz clic para ampliar
AUTOOL SDT102 wide vehicle coverage image Haz clic para ampliar
AUTOOL SDT102 overheat and low temperature protection image Haz clic para ampliar
AUTOOL SDT102 product details and interface image Haz clic para ampliar
Applications

Applications

Use SDT102 to locate leaks in common automotive low-pressure systems. For high-pressure systems, special test methods or professional tools may be required.

EVAP / Vacuum

Suitable for EVAP and vacuum leak checks when the correct service access tools and adapters are used.

Intake / Exhaust

Helps find leaks in intake and exhaust pipes by filling the test section with smoke for visual inspection.

Crankcase / Oil Seal

Can assist with crankcase, oil seal, intercooler air, and engine airtightness checks under low-pressure conditions.

Fuel / Coolant / Pipes

Supports fuel tank, coolant tank, pipe fittings, and low-pressure turbo system leak checks where smoke testing is appropriate.

How To Use

How To Use

Use liquid paraffin or baby oil, connect the tested pipe, power the unit with a DC 12V battery, and visually locate leaks once smoke fills the pipeline.

Step 1: Add Test Oil

Fill 10-15ml baby oil or liquid paraffin into the detector. Do not overfill. Open the engine cover and hang the detector if needed.

Step 2: Connect The Pipe

Disconnect the pipe that needs testing and connect it to the smoke detector with the proper hose or adapter.

Step 3: Connect 12V Power

Connect the detector to a DC 12V battery, then turn on the power switch so the smoke tester starts working.

Step 4: Locate Leaks

The unit starts producing smoke quickly; the tested pipeline may fill with smoke in about 30 seconds depending on system volume. Check leak points visually and use a headlamp if necessary.

Use Notes

  • El aceite de prueba no está incluido debido a restricciones logísticas.
  • Use liquid paraffin or baby oil as the testing oil.
  • Only refill when smoke becomes thin, and drain remaining test oil before adding fresh oil.
  • No lo utilice de forma continua durante más de 8 minutos.
  • Espere a que el detector se enfríe si se activa la protección contra sobrecalentamiento.
  • Do not use SDT102 for direct automotive A/C pressure testing.
Especificaciones

AUTOOL SDT102 Product Specifications

SDT102 is a lightweight built-in pump smoke leak detector with DC 12V power, low-oxygen smoke generation, 0.1-0.15MPa rated output pressure, 48W rated power, and 10-15ml suggested testing oil amount.

Core Specifications
ProductoAUTOOL SDT102 Smoke Leak Detector
Principio de funcionamientoCombustión con bajo oxígeno
Power SupplyBatería de 12V CC
Air Pressure OutputBomba de aire integrada
Presión de salida nominal0.1MPa-0.15MPa
Potencia nominal48W
Product Weight1.6kg
Gross Weight2.7kg
Main Dimensions180 × 102 × 143mm
Testing OilParafina líquida o aceite para bebé
Suggested Oil Amount10-15 ml
Smoke OutputStarts producing smoke quickly; pipeline fill time depends on test volume
ProtectionDeja de funcionar por encima de 75°C
Low TemperatureFunciona a -20 °C en condiciones adecuadas
Warranty3 years for eligible non-human damage cases
AUTOOL SDT102 product specifications and interface details Haz clic para ampliar
Core Specifications
ProductoAUTOOL SDT102 Smoke Leak Detector
Principio de funcionamientoCombustión con bajo oxígeno
Power SupplyBatería de 12V CC
Air Pressure OutputBomba de aire integrada
Presión de salida nominal0.1MPa-0.15MPa
Potencia nominal48W
Product Weight1.6kg
Gross Weight2.7kg
Main Dimensions180 × 102 × 143mm
Testing OilParafina líquida o aceite para bebé
Suggested Oil Amount10-15 ml
Smoke OutputStarts producing smoke quickly; pipeline fill time depends on test volume
ProtectionDeja de funcionar por encima de 75°C
Low TemperatureFunciona a -20 °C en condiciones adecuadas
Warranty3 years for eligible non-human damage cases
Product Comparison

Product Comparison

Use the comparison chart and model notes to choose the right smoke leak detector based on built-in pump, pressure range, EVAP support, air/smoke mode, accessories, and target systems.

SDT102 FocusCompact DIY-friendly model with built-in air pump, pressure gauge, 12V battery power, and EVAP / vacuum leak detection.
Modelos EVAP básicosSDT101 and SDT103 focus on EVAP systems around 3.2Kpa, but require an external air compressor.
Beginner ModelsSDT106 and SDT202 are beginner-friendly models around 12 psi.
Standard / High-End ModelsSDT203, SDT205, SDT205S, SDT206, and SDTMASTER cover standard and high-end leak detection needs around 15 psi.
High Pressure OptionSDT208 supports up to 35 psi.
Guía de decisiónCompare built-in pump, pressure range, EVAP tools, air/smoke mode, accessories, and target systems before ordering.
AUTOOL automotive smoke machine model comparison chart Haz clic para ampliar
Related Products

Related Products

Compare related AUTOOL smoke leak detector models before choosing the right pump setup, pressure range, EVAP support, accessories, and workshop function.

Manual y descargas

Manual y descargas

Download the SDT102 EN-DE manual for setup, operation, testing oil, 12V power, safety notes, package confirmation, and troubleshooting guidance.

AUTOOL SDT102 EVAP smoke machine manual preview Haz clic para ampliar

AUTOOL SDT102 User Manual

Open the PDF manual for SDT102 setup, operation, testing oil, safety notes, and troubleshooting guidance.

Descargar manual

¿Necesita confirmar la configuración?

Contact AUTOOL Store before ordering if you need to confirm testing oil, 12V power, EVAP testing, A/C auxiliary testing, accessories, package contents, or model selection.

Emailsupport@autoolstore.com WhatsApp+86 189 2647 7404

Preguntas y respuestas

These answers cover testing oil, oil amount, no-smoke troubleshooting, supported systems, EVAP support, A/C auxiliary testing, power supply, pressure setup, accessories, model differences, and warranty.

Related Guides

Related Guides

Read related smoke leak detector guides for model differences, smoke output troubleshooting, purchase checklist, and higher-end SDT model use cases.

Garantía y contacto

Garantía y contacto

For SDT102 setup, test oil confirmation, 12V power connection, EVAP testing, A/C auxiliary testing, package confirmation, warranty, no-smoke troubleshooting, or model selection, contact AUTOOL Store support.

Soporte preventa y de producto

Use support if you need help confirming the correct test oil, oil amount, package contents, supported systems, A/C auxiliary testing method, accessories, warranty terms, or whether SDT102 is the right smoke leak detector for your vehicle.

  • 3 años de garantía para casos elegibles de daños no causados por el usuario
  • Testing oil, 12V battery power, and operation support
  • EVAP, intake, exhaust, vacuum, crankcase, fuel tank, coolant tank, and low-pressure turbo testing confirmation
  • A/C segmented auxiliary testing confirmation
  • No-smoke troubleshooting and setup video review
  • Package contents, accessories, and SDT model selection support
Email Supportsupport@autoolstore.com WhatsApp Support+86 189 2647 7404

Valoraciones

No hay valoraciones aún.

Leave A Review

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

AUTOOL SDT102 Smoke Tester
AUTOOL SDT102 Car Smoke Tester for Vacuum Leaks EVAP DIY

US$79.00

999 disponibles

Añadir al carrito Este producto tiene múltiples variantes. Las opciones se pueden elegir en la página de producto