LANGUAGE & CURRENCY
AUTOOL BT360 Digital Automotive Diagnostic Battery Tester Analyzer Charging Scanner Tool
US$39.00
Key Features
- Battery Health Tests
- 12V Battery Types
- Global Standards
- Battery Health Tests: Combines battery, cranking, and charging tests so buyers can check overall battery condition in one pass.
- 12V Battery Types: Supports regular flooded, AGM flat plate, AGM spiral, GEL, and EFB 12V batteries.
- Global Standards: Covers major battery rating standards such as CCA, BCI, JIS, DIN, IEC, EN, SAE, and GB.
Secure checkoutFast supportBulk ready
AUTOOL BT360
Product Overview
The AUTOOL BT360 is a digital automotive battery system tester for 12V/24V lead-acid starting batteries. It helps technicians and DIY users check battery health, cranking performance, and charging system status with quick on-screen results, data records, reverse polarity protection, and support for common global battery test standards.
Battery Test
Cranking Test
Charging System Test
Reverse Polarity Protection
12V / 24VRated Battery Voltage
8-29VVoltage Test Range
4-300AhBattery Range
3 YearsWarranty Support
Click to enlarge
Click to enlargeBefore You Order And Use
Before You Order And Use
BT360 is a battery system tester, not a battery charger. Review version shipment, lithium battery limits, load test limits, and safe connection rules before ordering or testing.
New And Old Versions Ship Randomly
BT360 new and old versions may be shipped randomly. The functions are the same; only the color screen and LED screen appearance are different.
Tester, Not Charger
BT360 can run a charging system test, but it does not charge batteries. It is not a battery charger or battery maintainer.
Lithium Batteries Not Supported
BT360 is intended for supported lead-acid starting batteries. Choose BT960 if lithium battery support is required.
No Maximum Load Test
BT360 supports Battery Test, Cranking Test, and Charging System Test. It does not support Maximum Load Test.
Correct Clamp Connection
Connect the red clip to the positive terminal and the black clip to the negative terminal. Reverse polarity protection helps protect the tester, vehicle, and battery, but correct connection is still recommended.
Battery Test With Vehicle Off
When performing a battery test, make sure the vehicle is off first. Follow the device prompts for cranking and charging tests.
Safety Reminder
- Keep the work area dry, clean, bright, and well ventilated.
- Do not use the tester if the power cable or connection cable is damaged.
- Do not connect or disconnect test equipment while the ignition switch is on or the engine is running unless the test procedure requires it.
- Place the transmission in Park or Neutral, engage the handbrake, and avoid leaving the vehicle unattended during testing.
Product Comparison
Product Comparison
Compare BT360 with higher-level AUTOOL battery system testers before choosing lithium battery support, maximum load test, data printing, thermal monitoring, or leakage current monitoring.
BT360 FocusBattery Test, Cranking Test, Charging System Test, reverse polarity protection, data records, software upgrade, 14 languages, 2.4-inch color screen, 8-29V voltage test range.
BT460 UpgradeAdds Maximum Load Test while keeping the main 12V/24V battery, cranking, and charging system test functions.
BT760 UpgradeAdds data printing and a larger 3.2-inch screen, suitable when printed battery reports are needed.
BT880 UpgradeAdds thermal monitor and leakage current monitoring, with 18 language options and data printing.
BT960 UpgradeSupports lithium batteries and wider testing capability. Choose BT960 if lithium battery support is required.
Decision CheckBT360 does not support Battery Charge, Maximum Load Test, Thermal Monitor, Leakage Current Monitoring, Data Printing, or Lithium Batteries.
Click to enlargeKey Features
Key Features
BT360 helps evaluate battery health, cranking voltage, and charging system performance with conductive testing technology, clear screen prompts, multi-language menus, and safe clamp protection.
Battery Health Test
Checks key battery information such as voltage, capacity status, CCA, internal resistance, remaining life, and test result suggestions.
Cranking Ability Test
After selecting Cranking Test, follow the prompt to start the engine. BT360 helps evaluate the vehicle battery’s cranking voltage capability.
Charging System Test
After entering Charging Test, follow the prompt to increase speed to about 2500 RPM for 5 seconds, then press OK to complete the test.
Data Records And Waveform
Supports history records and voltage waveform viewing, helping users review battery test information after testing.
14 Language Options
Supports English, Portuguese, Spanish, French, German, Italian, Russian, Turkish, Thai, Japanese, Traditional Chinese, Simplified Chinese, Korean, and Polish.
Software Upgrade Support
BT360 can be connected to a computer with a USB data cable for software upgrade when applicable.
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlargeCompatibility And Fitment
Compatibility And Fitment
BT360 is designed for supported 12V/24V lead-acid starting batteries and covers common test standards including CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.
| Battery Compatibility | |
| Supported Battery Types | Regular flooded lead-acid, AGM flat plate, AGM spiral, GEL, and EFB batteries |
| Not Supported | Lithium batteries |
| Applicable Rated Voltage | 12V / 24V |
| Voltage Test Range | 8-29V |
| Battery Range | 4-300Ah |
| Applicable Vehicle Types | Cars, trucks, motorcycles, boats, and ATVs when the battery type and voltage are compatible |
| Measurement Standards And Ranges | |
| CCA | 30-2000 |
| BCI | 30-2000 |
| CA | 30-2000 |
| MCA | 30-2000 |
| DIN | 30-2500 |
| IEC | 30-2000 |
| EN | 30-3000 |
| SAE | 30-2000 |
| GB | 4-300Ah |
| JIS | 26A17R-N135 |
Click to enlarge
Click to enlargeBattery Compatibility
SupportedRegular flooded, AGM flat, AGM spiral, GEL, EFB
Not SupportedLithium batteries
Rated Voltage12V / 24V
Voltage Range8-29V
Battery Range4-300Ah
Test Standards
30-2000CCA / BCI / CA / MCA / IEC / SAE
DIN30-2500
EN30-3000
GB4-300Ah
JIS26A17R-N135
How It Works
How It Works
BT360 uses conductance testing technology to estimate battery condition and help identify common starting and charging system faults.
Measure Conductance
The tester measures the battery’s electrical conductance, which reflects the chemical reaction ability of the battery plates.
Compare Reference Values
BT360 compares the measured conductance with standard values expected from a battery in good condition.
Estimate Condition
The result helps estimate battery health, capacity change, cold cranking capability, and whether further inspection or replacement may be needed.
How To Use
How To Use
Connect BT360 directly to the battery clamps, select the correct battery type, test standard, and range, then follow the on-screen prompts for Battery Test, Cranking Test, and Charging Test.
Prepare The Vehicle
For Battery Test, make sure the vehicle is off. Keep the vehicle secure, engage the handbrake, and work in a dry and safe area.
Connect The Battery
Connect the red clip to the positive battery terminal and the black clip to the negative battery terminal.
Select Test Settings
Choose the battery type, the correct test standard, and the test range according to the battery label.
Run Battery Test
After setup, BT360 displays the battery test result within a few seconds and provides suggested result information.
Run Cranking Or Charging Test
For Cranking Test, follow the prompt to start the engine. For Charging Test, follow the prompt to raise speed to about 2500 RPM for 5 seconds, then press OK.
Use Notes
- Selecting the wrong battery type, standard, or range may affect the test result.
- Use the battery label to confirm CCA, CA, MCA, DIN, EN, SAE, GB, JIS, or other applicable standard before testing.
- If the result looks abnormal, recheck the clamp connection and settings, then test again.
- Contact support with photos or a short video if the issue remains.
Specifications
BT360 Product Specifications
BT360 combines a compact handheld design, 2.4-inch color display, dual-conductor Kelvin clamps, 8-29V voltage range, 4-300Ah battery range, and common global test standards.
| Core Specifications | |
| Product | AUTOOL BT360 Battery System Tester |
| Main Functions | Battery Test, Cranking Test, Charging System Test |
| Testing Technology | Conductance testing technology |
| Applicable Battery Rated Voltage | 12V / 24V |
| Voltage Range | 8-29V |
| Battery Range | 4Ah-300Ah |
| Screen | LCD material with LED backlight, 2.4-inch color screen |
| Testing Clamps | Dual-conductor Kelvin clamps |
| Casing Material | Acid-resistant ABS plastic |
| Cable | PVC material, 20AWG / 4-core wire, approximately 50cm |
| Dimensions | 138.6 × 76.8 × 30mm |
| Languages | 14 language options |
| Protection | Reverse polarity protection |
| Data | Data records and voltage waveform graph |
| Software | Software upgrade support by USB data cable when applicable |
| Warranty | 3-year warranty support for eligible non-human damage cases |
Click to enlargeCore Specifications
ProductAUTOOL BT360 Battery System Tester
Main FunctionsBattery Test, Cranking Test, Charging System Test
Testing TechnologyConductance testing technology
Applicable Battery Rated Voltage12V / 24V
Voltage Range8-29V
Battery Range4Ah-300Ah
ScreenLCD material with LED backlight, 2.4-inch color screen
Testing ClampsDual-conductor Kelvin clamps
Casing MaterialAcid-resistant ABS plastic
CablePVC material, 20AWG / 4-core wire, approximately 50cm
Dimensions138.6 × 76.8 × 30mm
Languages14 language options
ProtectionReverse polarity protection
DataData records and voltage waveform graph
SoftwareSoftware upgrade support by USB data cable when applicable
Warranty3-year warranty support for eligible non-human damage cases
Click to enlargeWhat Is In The Box
What Is In The Box
The package image shows the BT360 main unit, retail box, and user manual. Final package contents should follow the package image and selected product option.
Main UnitAUTOOL BT360 battery system tester
Clamp CableIntegrated red and black battery clamp cable shown with the tester
DocumentationUser manual shown in the package image
PackagingBT360 retail box shown in the package image
ReminderNo extra accessories are added here unless they are shown in the package image or selected product option.
Manual And Downloads
Manual And Downloads
Download the BT360 manual for safety rules, product parameters, operating procedures, battery test, cranking test, charging test, settings, maintenance, and warranty information.
Click to enlargeAUTOOL BT360 EN / DE Manual
Open the PDF manual for setup, safety, test procedure, product structure, and warranty guidance.
Download ManualNeed Help Before Testing?
Contact AUTOOL Store if you need help confirming battery type, test standard, lithium battery support, version shipment, test results, or BT360 / BT460 / BT760 / BT880 / BT960 model selection.
Related Products
Related Products
Compare related AUTOOL battery testers if you need lithium battery support, maximum load test, data printing, thermal monitoring, leakage current monitoring, or higher-level workshop functions.
- Select options This product has multiple variants. The options may be chosen on the product page
AUTOOL BT960 12V Car Battery Tester Lithium Battery Leakage Monitoring
From US$139.00 - Select options This product has multiple variants. The options may be chosen on the product page
AUTOOL BT880 Car Load Battery Tester Leakage Test with Built-in Temperature Sensor
From US$110.00 - Select options This product has multiple variants. The options may be chosen on the product page
AUTOOL BT760 Battery Load Tester with Printer
From US$99.00 - Select options This product has multiple variants. The options may be chosen on the product page
AUTOOL BT460 Car Battery Load Tester for 12V 24V
From US$70.00
Questions And Answers
These answers cover BT360 functions, battery compatibility, lithium battery limits, screen version shipment, charging test meaning, maximum load test limits, test standards, operation, troubleshooting, and warranty.
BT360 supports Battery Test, Cranking Test, and Charging System Test. It helps evaluate battery health, cranking voltage capability, and whether the vehicle charging voltage is normal.
No. BT360 is a battery system tester. It can run a charging system test, but it does not charge the battery and should not be used as a battery charger or maintainer.
No. BT360 does not support lithium batteries. Choose BT960 if lithium battery support is required.
BT360 new and old versions may be shipped randomly. The functions are the same; only the color screen and LED screen appearance are different. Please refer to the actual unit received.
BT360 supports regular flooded lead-acid, AGM flat plate, AGM spiral, GEL, and EFB batteries when the battery voltage and test range are compatible. It is not for lithium batteries.
Yes. BT360 applies to 12V / 24V rated batteries within its supported battery type and range. Its voltage test range is 8-29V.
No. BT360 does not support Maximum Load Test. Compare BT460, BT760, BT880, or BT960 if this function is needed.
BT360 supports common standards including CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB. Use the standard and value printed on the battery label when setting up the test.
For Battery Test, turn the vehicle off first. Connect the red clip to the positive terminal and the black clip to the negative terminal. Then select the battery type, test standard, and test range according to the battery label.
First recheck the clamp connection, battery type, test standard, and input range. If the result remains abnormal, test again under the correct procedure and contact AUTOOL Store support with photos or a short video.
Refer to the Packing List image for the final package contents. The image shows the BT360 tester, retail box, and user manual. Package contents may depend on the selected product option.
AUTOOL provides 3-year warranty support for eligible non-human damage cases. Contact AUTOOL Store for setup, model selection, accessory confirmation, troubleshooting, or warranty help.
Warranty And Contact
Warranty And Contact
For BT360 setup, battery type confirmation, test standard selection, screen version questions, lithium battery support, abnormal readings, package confirmation, or comparison with other BT series battery testers, contact AUTOOL Store directly.
Pre-Sales And Product Support
Use support if you need help confirming whether BT360 fits your battery type, whether you need BT460 / BT760 / BT880 / BT960 instead, or how to interpret battery, cranking, and charging system test results.
- 3-year warranty support for eligible non-human damage cases
- BT360 new and old version shipment explanation
- Battery type, voltage range, and test standard confirmation
- Lithium battery, maximum load test, and data printing model selection
- Abnormal test result troubleshooting with photos or video
- Package contents and user manual support
Customer Reviews
Leave A Review
Jacey Rice (verified owner) –
Fast delivery.
Fast delivery.
Jewell Bashirian (verified owner) –
Came without damage
Came without damage
Terrance Gutmann (verified owner) –
Super
Super