Do you find that your old refrigerant recovery machine in the bay can no longer keep up with your workflow? Slow recovery, unstable weighing, inaccurate oil charging, technicians repeatedly topping up refrigerant, and return visits from customers complaining that the air conditioning does not blow cold enough. A refrigerant machine is not a consumable. A poor purchasing decision will haunt your shop for three to five years. Spending half a day sorting out your requirements before buying is far more cost-effective than replacing the machine later.
1. First Step: Figure Out What Kind of Shop You Run#
The first thing for selection is not checking specifications, but calculating your weekly A/C job volume. Small shops handling 3–8 A/C jobs per week can get by with a basic three-in-one machine for recovery, evacuation and recharge. It is simple to operate, has fewer failure points and low maintenance costs. Mid-sized independent garages completing 8–20 jobs per week are recommended to go straight for models with touchscreens and automatic oil management. Automation cuts down human error when your technicians have uneven skill levels.
High-volume workshops handling 20+ jobs weekly, or those servicing fleet vehicles and hybrid cars, are the candidates for high-end workstations. Their pain point is not simply “whether the job can be done”, but job speed, complete service records and the ability to take on system rebuild work. Specifically, they need faster recovery and charging rates to shorten cycle time, independent multi-channel weighing systems to prevent incorrect oil mixing, line flushing functions to take on A/C system overhaul jobs, and printable service records for customer handover and internal management.
One non-negotiable prerequisite: confirm the refrigerant type you mainly work with. R134a and R1234yf belong to completely separate product lines. Clarifying this before purchase saves you from buying a second machine later.
2. Key Specifications to Evaluate#
Recovery and charging rates determine how long each job takes, measured in g/min. A rate above 300 g/min for recovery and 700 g/min for charging counts as efficient. Vacuum pump flow controls moisture and air removal during evacuation; mainstream models range from 50–60 L/min. Undersized pumps struggle to pull a proper vacuum in humid weather, raising the risk of compressor failures and comebacks.
The weighing system is often overlooked. Single-scale machines use one scale for both the refrigerant tank and oil, requiring constant switching between measurements. Separate independent scales measure the working tank, new oil and waste oil individually, so measurement errors do not cross-contaminate. This advantage shines when handling hybrids that use both PAG and POE oil.
Refrigerant purification depends on processing stages: oil separation, filter drying, non-condensable gas venting and purified storage. Units with a full four-stage process produce clean reclaimed refrigerant safe for reuse, cutting your long-term refrigerant expenses.
Automation and user interface features include guided workflows, built-in vehicle databases, VIN input and service report printing. These features directly reduce training costs for new technicians. Among add-on functions, refrigerant line circulation flushing delivers the most value. It cleans internal circuits without pipe disassembly, creating a new billable service for your shop.
Finally, review after-sales terms: the main unit warranty period, cost of consumables (filter driers, vacuum pump oil) and long-term spare parts availability.
3. What Separates the Three Machine Classes#
Basic semi-automatic models (such as the LM707) support recovery, evacuation and recharge with manual oil filling, one electronic scale and no line flushing. They suit small shops with low job volume run by experienced senior technicians.
Mid-range fully automatic models (such as the LM708) build on this foundation with touchscreen control, automatic oil management and an on-board vehicle database. They support both R134a and R1234yf, ideal for mid-sized garages working on a mixed fleet of old and new vehicles.
High-end full-function workstations (such as the LM806) sit in a different tier. They come with four independent electronic scales, four-stage refrigerant processing, line flushing, a 10.1-inch guided touchscreen, VIN entry and thermal printing. The trade-off is that they only support one refrigerant type (R134a or R1234yf), and the upfront investment is higher. It is not just a marginally better machine — it solves a whole extra set of problems. Whether it is worth the upgrade depends on whether your shop needs those capabilities.
4. What Problems Does the LM806 Solve?#
On the hardware side, it features a rated recovery rate over 350 g/min, charging rate above 800 g/min, a 60 L/min vacuum pump and an 18 kg working tank, engineered for high-frequency workshop use. Four independent scales measure the working tank, PAG oil, POE oil and waste oil separately. The tank scale has an accuracy of ±10 g, and oil scales are ±5 g. This reduces comebacks caused by overfilled oil (which strains compressors) or underfilled oil (insufficient lubrication).
The four-stage refrigerant workflow covers oil separation, filtration and drying, non-condensable gas management and purified storage, so recovered R134a can be recycled back into the working tank. Its editable database covering 61 vehicle brands pairs with VIN entry and thermal printing, letting you provide service documentation with the vehicle — a feature many shops lack.
Its standout differentiator is line flushing: refrigerant circulates through permitted circuit sections for cleaning without disassembly. This transforms A/C overhauls from labour-intensive pipe teardown work into equipment-based billable work. Combined with the guided workflow on the 10.1-inch screen, new technicians can follow the steps and avoid missing critical procedures.
Important limitations to note: it supports only one refrigerant type, either R134a or R1234yf, and has no built-in refrigerant identification. Technicians must manually confirm the refrigerant before connection. The working tank must never be filled beyond 80% of its usable capacity. Replace the filter drier as prompted, and change vacuum pump oil every 600 operating minutes or once oil degradation occurs. The main unit carries a 3-year warranty, and standard accessories have a 1-year warranty — solid coverage for workshop equipment.
5. Five Points to Consider Before Placing Your Order#
- Do not compare only the unit price. Calculate the annual cost of consumables including filters, vacuum pump oil and seals.
- Confirm the refrigerant type; R134a and R1234yf cannot be mixed.
- Check your workshop power supply and the machine’s voltage rating. Do not rely on extension cords to fix power issues.
- Assess your team. If you have many junior technicians, prioritise models with guided touchscreen workflows.
- Ask yourself whether you genuinely plan to offer line flushing services. This decides whether you should stick to a standard model or upgrade to a workstation.
6. Frequently Asked Questions#
Q: Can the LM806 handle R1234yf? A: You can specify the refrigerant type at the time of order. This machine supports only one refrigerant, either R134a or R1234yf. Mixed or unidentified refrigerant must never be connected to the working tank.
Q: What is the advantage of multiple scales over a single scale? A: Oil and refrigerant are measured separately, minimising dosing errors. This is especially valuable for hybrid vehicles that require both PAG and POE oil.
Q: When do you need line flushing? A: During A/C system overhauls, when circuits are contaminated, or before switching refrigerant types. Always follow OEM instructions to remove or bypass components as required.
Q: Can reclaimed refrigerant be reused? A: This depends on refrigerant condition, local workshop regulations and regional laws. The machine only purifies refrigerant; it does not determine compliance for reuse.
7. Final Summary#
There is no universally “best” machine — only the one matching your job volume and service scope. Small shops do not need to overspend on a high-end workstation. If you handle high A/C volumes, carry out system overhauls, service hybrids and require formal service records, the LM806 workstation will deliver a return on your investment. Start by calculating your weekly job count and service offerings, then cross-reference with the specification sheet. This approach is far more reliable than relying solely on sales quotes.
Need help choosing a tool?
Tell us your vehicle and the job; our team replies within 24-48 business hours.
- Phone / WhatsApp
- +86 189 2647 7404
- Hours
- Monday-Friday, 09:00-18:00 CST (UTC+8)











Discussion
Comments 0
Need help with an order, warranty or a fault? Contact support
No comments yet. Ask a question or share how the tool worked for you.