All Categories

Repair testing / 8 sub-categories

Automotive Repair & Testing Equipment

Diagnostic tools for leak tracing, visual inspection, battery health, circuits, pressure, spark, oil, and electrical readings.

Leak tracingSmoke Leak DetectorFind EVAP, intake, vacuum, exhaust, and sealed-system leaks faster. Visual inspectionSmart Articulating BorescopeInspect cylinders, pipes, panels, and hidden spaces with controlled camera movement. Battery healthBattery System TesterCheck battery, starting, charging, and electrical supply conditions. Circuit diagnosisAutomotive Circuit TesterTrace power, ground, continuity, shorts, and component activation faults. Fluid checkOil Analysis TesterEvaluate oil condition and contamination clues before deeper diagnosis. CompressionEngine Pressure TesterMeasure cylinder, fuel, vacuum, and pressure performance. Ignition testSpark Plug TesterVerify ignition spark behavior and plug performance before replacement. Electrical meterAutomotive Diagnostic MultimeterRead voltage, resistance, current, frequency, and automotive signals.

Repair maintenance / 6 sub-categories

Automotive Repair & Maintenance Equipment

Service equipment for fluid exchange, A/C diagnostics, refrigerant recovery, oil handling, and cooling-system work.

ATF serviceTransmission Fluid ExchangerExchange automatic transmission fluid with controlled flow. Brake fluidPulsating Brake Fluid ExchangerFlush brake fluid with pulsed pressure for consistent bleeding. A/C gaugeSmart Digital Manifold GaugeMonitor refrigerant pressure, vacuum, temperature, and A/C data. A/C recoveryRefrigerant Recovery MachineRecover, vacuum, and recharge refrigerant for repeatable A/C service. Oil handlingPneumatic Oil Drainer & ExtractorDrain and extract used oil cleanly in service environments. Cooling serviceCooling System Tester and FillerPressure test, vacuum fill, and reduce trapped air.

Carbon cleaning / 3 sub-categories

Carbon Deposit Cleaning Equipment

Carbon-removal equipment for injectors, intake valves, components, and workshop cleaning jobs.

Injector benchFuel Injector Cleaner & TesterClean injectors and compare spray, flow, leakage, and atomization. Walnut blastingWalnut Sand De-Carbon CleanerRemove intake valve carbon deposits using walnut media. Dry ice cleaningDry Ice Blasting MachineClean carbon, grease, and grime with reduced residue.

Wheel tire / 3 sub-categories

Wheel and Tire Repair Equipment

Equipment for alignment, lifting, tire repair, tire mounting, and service-bay workflows.

Alignment3D Wheel Aligner MachineMeasure alignment angles and support tire-wear correction. Bay liftingLifting EquipmentLift vehicles for underbody, tire, brake, and suspension work. Tire serviceServe the TireSupport tire mounting, balancing, repair, and routine tire service.

Tool storage / 1 sub-category

Workshop Tool Storage Series

Storage products for keeping workshop tools, test equipment, and accessories organized.

Shop organizationWorkshop Tool StorageKeep diagnostic tools and repair equipment organized by bay.

EV charging / 1 sub-category

Electric Vehicle Charger Series

EV charging products for new-energy vehicle service, workshop use, and installation scenarios.

New energyEV ChargingBrowse electric vehicle charging products for garage and shop use.

OBD diagnosis / 4 sub-categories

OBD Diagnostic Tools

OBD-related testers, cable products, used-car inspection tools, and key frequency diagnostics.

Used car checkUsed Car Diagnostic TesterInspect used vehicles and identify hidden system faults. Key signalAutomotive Key Frequency TesterCheck remote key frequency signals and key diagnostics. Connector cableOBD CablesFind diagnostic cables and connectors for vehicle interfaces. Cable setOBD Cable SeriesBrowse OBD cable families for models, adapters, and setups.

Accessories / 8 sub-categories

Accessories

Replacement parts, adapters, consumables, cables, and add-ons for major diagnostic and service equipment.

Alignment parts3D Wheel Aligner AccessoriesTargets, clamps, parts, and support items for alignment machines. Leak accessoriesSmoke Leak Detector AccessoriesAdapters, hoses, caps, and consumables for smoke testing. Camera partsAutomotive Inspection Camera AccessoriesCamera probes, hooks, mirrors, cables, and inspection attachments. Injector partsFuel Injector Cleaner & Tester AccessoriesAdapters, tubes, seals, and service parts for injector benches. Walnut partsWalnut Blasting Machine AccessoriesNozzles, hoses, adapters, and parts for walnut de-carbon cleaning. Dry ice partsDry Ice Blasting Machine AccessoriesNozzles, tubes, fittings, and support for dry ice blasting. A/C partsA/C Refrigerant Recovery & Recharge Machine AccessoriesHoses, couplers, filters, fittings, and service parts for A/C machines. Battery partsBattery Tester AccessoriesClamps, cables, adapters, and add-ons for battery testers.

SALE 🔍

AUTOOL CT160 Fuel Injector Tester & Heating Ultrasonic Cleaner Machine

AUTOOL CT160 Fuel Injector Tester & Heating Ultrasonic Cleaner Machine

Original price was: US$379.00.Current price is: US$245.00.

Key Features

Heated Ultrasonic
4-Cylinder Bench
Leak & Spray Tests

Voltage

Shipping Warehouse

Clear

☰ REQUEST BULK / B2B QUOTE

Secure checkoutFast supportBulk ready

AUTOOL CT160

Product Overview

The AUTOOL CT160 is a 4-cylinder ultrasonic fuel injector cleaner and tester for standard 12V gasoline injectors. It supports ultrasonic cleaning, heated cleaning fluid up to 45°C, leakage test, spray pattern observation, spray volume comparison, and multiple simulated working-condition tests for cars and compatible motorcycles.

4-Cylinder Testing Ultrasonic Cleaning 45°C Heating 110V / 220V

100mlTest Tube Volume

2000mlCleaning Tank

0-0.6MPaSystem Pressure

3 YearsWarranty

AUTOOL CT160 fuel injector cleaner and tester main product image

AUTOOL CT160 fuel injector cleaner tester with 3-year warranty

Before You Order And Use

Correct fluid selection is critical for CT160. Use cleaning fluid only in the ultrasonic cleaning tank and test fluid only in the injector testing circuit. Using the wrong liquid may damage internal parts.

Use Proper Cleaning Fluid

For ultrasonic cleaning, use professional engine carbon cleaning fluid or injector ultrasonic cleaning fluid. 75%+ medical alcohol can be used as an alternative, but cleaning performance may be weaker.

Use Proper Test Fluid

For injector testing, use professional automotive injector test fluid. If it is not available locally, 75%+ medical alcohol can be used as an alternative test fluid.

Do Not Test With Cleaning Fluid

Do not use corrosive cleaning fluid as test fluid. Cleaning fluid may corrode internal components and rubber parts, cause leaks, and damage the machine.

Do Not Run Ultrasonic Tank Dry

Add the correct cleaning fluid before starting ultrasonic cleaning. Running the ultrasonic function without fluid may damage the ultrasonic motherboard.

Diesel Injector Limit

CT160 can clean diesel injectors with ultrasonic cleaning, but it cannot test diesel injectors. Use CT160 testing functions for compatible gasoline injectors only.

Single Injector Testing

When testing a single injector, plug the other 3 cylinders. CT160 comes with 3 plugs for this single-injector testing setup.

Additional Reminders

CT160 is designed for standard 12V gasoline injectors, not GDI high-pressure injector testing.
For GDI, EFI, FSI, or broader high-pressure injector compatibility, consider CT400, CT450, CT500, FN606, or FN608.
Non-disassembly injector cleaning and throttle valve cleaning require optional accessories and may require extra purchase.
The working voltage range supports 110V or 220V power input. Choose the correct plug and voltage version for your region.
If short-circuit protection is triggered, the internal fuse may shut down the machine to reduce electrical risk. Stop use and check before restarting.

How To Choose

CT160 is suitable for users who need a compact 4-cylinder injector cleaner and tester with heated ultrasonic cleaning. Check the limits before choosing it over CT150, CT200, CT400, CT500, FN606, or FN608.

Need 4-Cylinder Testing?

Choose CT160 if you need to clean and test up to 4 compatible standard fuel injectors at the same time.

Need Heated Cleaning?

Choose CT160 over CT150 if you want heated ultrasonic cleaning. CT160 heats the cleaning fluid up to 45°C to improve cleaning efficiency.

Need 6 Cylinders?

Choose CT200 if you need 6-cylinder injector testing. CT200 adds two more testing cylinders while keeping similar basic testing logic.

Need GDI Support?

Choose CT400, CT450, CT500, FN606, or FN608 if you need GDI or higher-pressure injector compatibility. CT160 is not the right choice for GDI testing.

Key Features

CT160 combines ultrasonic cleaning, heated cleaning fluid, injector testing, pressure adjustment, drain valves, and an English-labeled control panel in a compact bench-top structure.

Ultrasonic Cleaning

Cleans single or multiple compatible injectors at the same time and helps remove deposits from injector accessories and internal passages.

Heating Cleaning Fluid

The cleaning tank can heat the cleaning fluid up to 45°C, helping improve the cleaning effect on fuel injectors.

Multiple Injector Tests

Supports idle, medium speed, high speed, accelerating, variable speed, leakage, idle spray volume, medium spray volume, and high spray volume tests.

Drain Valve Design

Used cleaning fluid and testing fluid can be recovered through drain valves, making fluid handling and maintenance easier.

English Control Panel

The control panel supports working parameter display and adjustment, function selection, pressure adjustment, and Start / Pause / Stop operation.

Compact Dedicated Structure

The bench-top design integrates a 2000ml ultrasonic cleaning tank, 4 test cylinders, pressure gauge, injector rail, switches, and test controls.

AUTOOL CT160 ultrasonic cleaning for 4-cylinder injectors

AUTOOL CT160 fuel injector test functions including leakage and spray volume tests

AUTOOL CT160 heating cleaning fluid up to 45 degrees Celsius

AUTOOL CT160 2000ml cleaning tank capacity and compact shape design

AUTOOL CT160 drain valve design for recovering cleaning and testing fluid

AUTOOL CT160 humanized control panel with function selection and pressure adjustment

Functions And Test Coverage

Use CT160 to clean compatible injectors, observe spray quality, compare flow volume, check leakage or blockage, and support basic fuel injector diagnosis for cars and selected motorcycles.

Petrol Injector Cleaning

Cleans compatible gasoline injectors with ultrasonic energy to help remove carbon deposits and internal blockages.

Spark Plug Cleaning

Spark plugs can be placed into the ultrasonic cleaning tank with suitable cleaning fluid for basic cleaning.

Leakage And Blockage Checks

Tests injector leakage, spray pattern, and spray volume under different simulated working conditions.

Motorcycle Injector Testing

Supports compatible motorcycle injector testing, including supported HONDA, YAMAHA, SUZUKI, and SANYANG injector types when the required accessories are used.

Optional Non-Disassembly Cleaning

Injector cleaning without disassembly and throttle valve cleaning without disassembly require optional accessories and may require extra purchase.

Fuel System Benefits

Cleaning and testing can help identify injector working status, support better idle and throttle response, reduce stalling caused by dirty injectors, and reduce unnecessary injector replacement.

AUTOOL CT160 wide range of applications for cars and motorcycles

How To Use

Follow the basic workflow: clean injector exterior, run ultrasonic cleaning, install injectors on the main unit, add test fluid, then perform leakage, spray pattern, and flow rate tests.

Clean Injector Exterior

Clean the injector outside with cleaning liquid before using the machine. Put the injectors into the ultrasonic tank only after the outside is free of dirt.

Run Ultrasonic Cleaning

Add suitable cleaning fluid, keep the fluid below the pulse-line connection port, connect the pulse signal wire, then select ultrasonic cleaning to start working.

Install Injectors For Testing

Fix the injectors on the main machine, check resistance, shorts, and current draw, then add test liquid to about half of the glass tube.

Run Leak, Spray, And Flow Tests

Perform leakage test, spray pattern observation, and flow rate testing on the flow bench, then retest full injector function after cleaning.

AUTOOL CT160 operation steps for ultrasonic cleaning and fuel injector testing

Use Notes

Do not let the cleaning fluid exceed the pulse-line connection port during ultrasonic cleaning.
Recycle remaining cleaning fluid after ultrasonic cleaning according to local disposal rules.
Do not mix cleaning fluid and test fluid circuits.
Set the function number and test time according to the test you need. No special advanced parameter setup is required for basic testing.

Specifications

AUTOOL CT160 Product Specifications

CT160 is a compact 4-cylinder injector cleaner and tester with a 2000ml ultrasonic cleaning tank, 100ml test tubes, 28kHz cleaning frequency, 70W ultrasonic cleaning power, and 0-0.6MPa system pressure.

Power And Environment
Product	AUTOOL CT160 Fuel Injector Cleaner & Tester
Input Voltage	110V / 220V ±10%
Frequency	50Hz / 60Hz
Environment Temperature	0°C-40°C
Relative Humidity	<85%
External Magnetic Field Strength	<400A/m
Testing And Cleaning
Supported Cylinders	4 fuel injectors
Test Tube Volume	100ml
Cleaning Tank Volume	2000ml
Cleaning Tank Dimensions	150 × 136 × 103mm
Range Of Rotation	0-7500r/min
PWM Pulse Width	0-20.0ms, step 0.1ms
Working Time Settings	0-10min
Cleaning Frequency	28kHz
Injection Times	0-9900 times, step 100ms
System Pressure	0-0.6MPa
Ultrasonic Cleaning Power	70W
Cleaning Fluid Heating	Up to 45°C
Size And Support
Main Unit Dimensions	292 × 260 × 273mm
Approximate Net Weight	8.0kg
Package Dimensions	340 × 295 × 360mm
Warranty	3-year support for eligible non-human damage cases

AUTOOL CT160 product specifications chart

Core Specifications

Input Voltage110V / 220V ±10%

Supported Cylinders4 fuel injectors

Test Tube Volume100ml

Cleaning Tank Volume2000ml

Range Of Rotation0-7500r/min

PWM Pulse Width0-20.0ms, step 0.1ms

System Pressure0-0.6MPa

Cleaning Frequency28kHz

Ultrasonic Cleaning Power70W

Main Dimensions292 × 260 × 273mm

AUTOOL CT160 packing list and package contents

What Is In The Box

The packing list image shows the CT160 main unit, retail box, manual, injector adapters, test cables, pressure gauge assembly, and accessory sets. Final package contents should follow the current package image and order configuration.

Main UnitAUTOOL CT160 fuel injector cleaner and tester

Retail BoxCT160 product package box

Fluid ToolsFunnel, drain valve parts, and fluid handling accessories shown in the package image

Injector AdaptersAdapter plates, connector sets, injector adapters, and plugs shown in the package image

Test CablesFuel injector test cables and pulse signal cable set shown in the package image

Pressure AssemblyPressure gauge and rail assembly shown in the package image

DocumentationUser manual

FluidsCleaning fluid and test fluid are not included unless clearly listed in the selected order option

Product Comparison

Compare CT160 with other AUTOOL fuel injector cleaner and tester machines before choosing cylinder capacity, heating, injector type support, language setting, pump count, and advanced testing capability.

CT150 vs CT160Both are 4-cylinder cleaners and testers for standard fuel injectors. CT160 adds heated ultrasonic cleaning up to 45°C.

CT160 vs CT200CT160 supports 4 injectors. CT200 supports 6 injectors and is better if you need larger cylinder testing capacity.

CT400 / CT450 / CT500These higher models are better for GDI, EFI, FSI, or long fuel injector support. CT450 adds 50°C heating, while CT500 adds wider pulse and continuous injection tests.

FN606 / FN608FN606 supports 6 cylinders and advanced injector support. FN608 supports 8 cylinders and uses two independent fuel pumps for left and right fuel rails.

Decision CheckBefore ordering, compare supported cylinder number, injector type, voltage settings, heating, oil baffle design, storage drawer, fuel pump count, and optional accessories.

AUTOOL CT150 CT160 CT200 CT400 CT450 CT500 FN606 FN608 fuel injector cleaner comparison chart

AUTOOL CT160 User Manual

Open the multilingual PDF manual for CT160 setup, operation, accessories, and maintenance guidance.

Download Manual

Need Fluid Or Model Confirmation?

Contact AUTOOL Store before ordering if you need to confirm cleaning fluid, test fluid, GDI compatibility, diesel injector limits, motorcycle injector accessories, or CT160 package contents.

Email[email protected] WhatsApp+86 189 2647 7404

Questions And Answers

These answers cover injector compatibility, diesel injector limits, GDI support, fluid selection, model comparison, single injector testing, accessories, and safe operation.

What Injectors Can CT160 Clean And Test?

Can CT160 Clean And Test Diesel Injectors?

Can CT160 Test GDI High-Pressure Injectors?

What Cleaning Fluid Should I Use?

What Test Fluid Should I Use?

Can I Use Cleaning Fluid To Test Injectors?

How Do I Test A Single Injector With CT160?

How Do I Set The Test Parameters?

What Is The Difference Between CT150, CT160, And CT200?

What Is The Difference Between CT400, CT450, And CT500?

What Is The Difference Between FN608 And FN606?

What Is The Difference Between FN608 And CT500?

Warranty And Contact

For CT160 setup, cleaning fluid, test fluid, injector compatibility, diesel injector limits, GDI model selection, optional accessories, package contents, or troubleshooting, contact AUTOOL Store directly.

Pre-Sales And Product Support

Use support if you need help confirming CT160 fluid rules, 4-cylinder testing setup, single injector testing plugs, motorcycle injector accessories, non-disassembly cleaning accessories, or comparison with CT150, CT200, CT400, CT450, CT500, FN606, and FN608.

3-year warranty support for eligible non-human damage cases
Cleaning fluid and test fluid confirmation
Standard injector, motorcycle injector, diesel cleaning, and GDI compatibility checks
Optional accessory and package content confirmation
Injector testing setup, pressure adjustment, and operation guidance
Model selection support across CT150 / CT160 / CT200 / CT400 / CT450 / CT500 / FN606 / FN608

Email Support[email protected] WhatsApp Support+86 189 2647 7404

Reviews

There are no reviews yet.

Leave A Review

Automotive Repair & Testing Equipment

Automotive Repair & Maintenance Equipment

Carbon Deposit Cleaning Equipment

Wheel and Tire Repair Equipment

Workshop Tool Storage Series

Electric Vehicle Charger Series

OBD Diagnostic Tools

Accessories

AUTOOL CT160 Fuel Injector Tester & Heating Ultrasonic Cleaner Machine

Product Overview

Before You Order And Use

Use Proper Cleaning Fluid

Use Proper Test Fluid

Do Not Test With Cleaning Fluid

Do Not Run Ultrasonic Tank Dry

Diesel Injector Limit

Single Injector Testing

Additional Reminders

How To Choose

Need 4-Cylinder Testing?

Need Heated Cleaning?

Need 6 Cylinders?

Need GDI Support?

Key Features

Ultrasonic Cleaning

Heating Cleaning Fluid

Multiple Injector Tests

Drain Valve Design

English Control Panel

Compact Dedicated Structure

Functions And Test Coverage

Petrol Injector Cleaning

Spark Plug Cleaning

Leakage And Blockage Checks

Motorcycle Injector Testing

Optional Non-Disassembly Cleaning

Fuel System Benefits

How To Use

Clean Injector Exterior

Run Ultrasonic Cleaning

Install Injectors For Testing

Run Leak, Spray, And Flow Tests

Use Notes

AUTOOL CT160 Product Specifications

What Is In The Box

Product Comparison

Related Products

Manual And Downloads

AUTOOL CT160 User Manual

Need Fluid Or Model Confirmation?

Questions And Answers

Warranty And Contact

Pre-Sales And Product Support

Reviews

Get 10% Off Your First Order

Shop by Category

Support & Orders

AUTOOL Resources