AUTOOL PT660 Brake Pressure Gauge Pressure Gauge

(3 Kundenrezensionen)

US$359.00

Secure checkoutFast supportBulk ready
AUTOOL PT660

Produktübersicht

The AUTOOL PT660 Brake Pressure Gauge is designed for brake system checking and dual-channel brake pressure comparison. With a high-precision sensor, atmospheric pressure calibration, L/R pressure input, one-click value locking, zeroing, and a 3-inch backlit digital display, PT660 helps technicians measure and compare brake system internal fluid pressure more efficiently.

Dual-Channel Test 0-210Bar ±1%FS Accuracy 3-Inch Display
0.1Resolution
3 Unitspsi / Bar / kg/cm²
4×AAAStromversorgung
3 JahreGarantie
AUTOOL PT660 Brake Pressure Gauge main product image Zum Vergrößern klicken
Hauptmerkmale

Hauptmerkmale

PT660 is built to capture brake pressure data from two channels, compare pressure trends, and support faster brake system diagnosis with clear digital readings.

Dual-Channel Brake Pressure Detection

Detect two brake pressure channels through the L/R input slots, making it easier to compare front / rear or left / right brake pressure behavior.

Brake Pressure Balance Comparison

Supports simultaneous pressure comparison between two brake calipers, helping technicians capture pressure differences and diagnose brake system imbalance.

High-Precision Sensor

Built-in high-precision sensor provides measurement accuracy up to ±1%FS for brake system pressure checking.

Wide Measuring Range

PT660 supports 0-210Bar measurement range with 0.1 resolution, helping cover common brake system internal fluid pressure checks.

Smart 3-Inch Backlit Display

The 3-inch backlit digital display shows pressure data clearly in bright or dim workshop environments without complicated menu browsing.

One-Click Locking And Zeroing

Supports one-click locking and zeroing, atmospheric pressure calibration, and visualized data display for more efficient brake pressure measurement.

Technische Daten

Technische Daten

Review the PT660 brake pressure gauge measurement range, unit support, accuracy, display, power supply, and application scope before ordering.

Product And Application
ProduktAUTOOL PT660 Digital Brake Pressure Tester / Brake Pressure Gauge
AnwendungInternal fluid pressure measurement of the brake system
Testing MethodDual-channel brake pressure measurement through L/R pressure input
Typical UseBrake pressure checking, front / rear pressure comparison, left / right brake pressure comparison, and brake system diagnosis
Messung
Messbereich0-210Bar
Messgenauigkeit±1%FS
Resolution0.1psi, 0.1Bar, 0.1kg/cm²
Messeinheitenpsi, Bar, kg/cm²
FunctionsAtmospheric pressure calibration, one-click locking, zeroing, unit switching, wheel direction selection, and result review
Anzeige und Stromversorgung
Anzeige3-inch backlit digital display
Interface InformationBattery level, atmospheric pressure calibration, unit display, lock icon, backlight, sound, wheel pressure, maximum / minimum value, and real-time pressure
Betriebsspannung4 × 1.5V AAA-Batterien
Betriebstemperatur-10°C to +60°C
Support
HandbuchAUTOOL PT660 EN-DE Manual available for download
Garantie3 Jahre Garantie für berechtigte Schäden, die nicht durch menschliches Verschulden verursacht wurden
SupportEmail and WhatsApp support for setup, adapter, zeroing, measurement, and warranty questions
Product And Application
ProduktAUTOOL PT660 Digital Brake Pressure Tester / Brake Pressure Gauge
AnwendungInternal fluid pressure measurement of the brake system
Testing MethodDual-channel brake pressure measurement through L/R pressure input
Typical UseBrake pressure checking, front / rear pressure comparison, left / right brake pressure comparison, and brake system diagnosis
Messung
Messbereich0-210Bar
Messgenauigkeit±1%FS
Resolution0.1psi, 0.1Bar, 0.1kg/cm²
Messeinheitenpsi, Bar, kg/cm²
FunctionsAtmospheric pressure calibration, one-click locking, zeroing, unit switching, wheel direction selection, and result review
Anzeige und Stromversorgung
Anzeige3-inch backlit digital display
Interface InformationBattery level, atmospheric pressure calibration, unit display, lock icon, backlight, sound, wheel pressure, maximum / minimum value, and real-time pressure
Betriebsspannung4 × 1.5V AAA-Batterien
Betriebstemperatur-10°C to +60°C
Support
HandbuchAUTOOL PT660 EN-DE Manual available for download
Garantie3 Jahre Garantie für berechtigte Schäden, die nicht durch menschliches Verschulden verursacht wurden
SupportEmail and WhatsApp support for setup, adapter, zeroing, measurement, and warranty questions
Anwendung

Anwendung

Follow the correct zeroing and connection procedure before measuring brake pressure. Always check the measurement range and safety conditions before testing.

Connect L/R Pressure Input

Connect the pressure input cable to the L/R slot according to the channel you need to test or compare.

Vor dem Test nullstellen

Perform atmospheric pressure zero calibration before measurement to improve test reliability.

Install Adapter

Connect the model-specific adapter to the measurement probe and confirm the connection is secure.

Select Unit And Wheel Direction

Select the required unit, such as psi, Bar, or kg/cm², and choose the wheel direction before testing.

Start Measurement

Press the Measurement button to start brake pressure measurement and monitor the pressure values on the display.

Review And Switch Units

After measurement is complete, review the results, compare pressure values, and switch units when needed.

Anwendungshinweise

  • Always perform zero calibration before testing.
  • Pay attention to the measuring range. If the range is exceeded, the result may show the maximum or minimum value.
  • Check the batteries, hoses, adapters, and connections before use.
  • Wear safety goggles and protective gloves when working around brake fluid or system fluid.
  • If readings appear abnormal, repeat zeroing and confirm that the adapter and pressure input cable are properly connected.
Produktvergleich

Produktvergleich

PT660 is part of the AUTOOL pressure gauge tool family. Use the comparison chart to choose the correct gauge based on the vehicle system you need to test.

PT660 FocusBrake system pressure tester for measuring internal fluid pressure of the brake system
Compared With PT610 / PT620 / PT630 / PT640 / PT650PT610 is for engine cylinder pressure, PT620 for engine oil circulation, PT630 / PT640 for fuel systems, and PT650 for transmission pressure
PT660 DifferencePT660 is focused on brake system pressure and supports simultaneous pressure measurement of two brake calipers
Display And RangePT660 uses a 3-inch screen and is marked as a brake system pressure tester in the comparison chart
EntscheidungshilfeChoose based on target system: cylinder, oil, fuel, GDI, transmission, or brake pressure
AUTOOL engine pressure testers comparison chart including PT660 brake pressure gauge Zum Vergrößern klicken
Ähnliche Produkte

Ähnliche Produkte

Compare related AUTOOL pressure gauges before choosing the right tester for differential pressure, brake pressure, cylinder pressure, oil pressure, fuel pressure, GDI fuel pressure, or transmission oil pressure.

Handbuch und Downloads

Handbuch und Downloads

Download the AUTOOL PT660 user manual for safety rules, product structure, technical specifications, operation guidance, maintenance, and warranty information.

AUTOOL PT660 User Manual preview Zum Vergrößern klicken

AUTOOL PT660 User Manual

Open the PT660 EN-DE manual for setup, atmospheric pressure calibration, measurement operation, technical specifications, and safe-use guidance.

Handbuch herunterladen
Vor Bestellung und Gebrauch

Vor Bestellung und Gebrauch

PT660 is a brake pressure testing tool. Correct zeroing, range awareness, battery condition, hose / adapter checks, and personal protection are important before measurement.

Hinweise zu Kauf und Nutzung

  • Perform atmospheric pressure zero calibration before use.
  • Pay attention to the measuring range; if the range is exceeded, the result may show the maximum or minimum value.
  • Use 4 × 1.5V AAA batteries.
  • Measurement range: 0-210Bar.
  • Measurement units: psi, Bar, kg/cm².
  • Resolution: 0.1psi, 0.1Bar, 0.1kg/cm².
  • Operating temperature: -10°C to +60°C.
  • Check battery, hoses, and adapters before use.
  • Wear safety goggles and protective gloves when working around brake fluid or system fluid.
  • Packing List image was not included in the provided source HTML. If a package image is available later, use only the most relevant one.

Fragen und Antworten

These answers cover zero calibration, measurement range, unit support, dual-channel comparison, batteries, out-of-range readings, and pre-use safety checks.

Garantie und Kontakt

Garantie und Kontakt

For product support, PT660 setup, zero calibration, adapter confirmation, measurement questions, pressure range confirmation, manual requests, or warranty support, contact AUTOOL Store directly.

Beratung vor dem Kauf und Produktsupport

Use support if you need help confirming PT660 brake pressure testing workflow, L/R channel use, adapters, unit switching, zeroing operation, out-of-range readings, comparison with other AUTOOL pressure gauges, or warranty terms.

  • 3 Jahre Garantie für berechtigte Schäden, die nicht durch menschliches Verschulden verursacht wurden
  • Manual request and setup confirmation
  • Pre-sale help for PT660 / PT610 / PT620 / PT630 / PT640 / PT650 pressure gauge model selection
  • Support for zeroing, adapters, brake pressure measurement, and result comparison

Customer Reviews

  1. 5
    (3 Kundenrezensionen)
    100% of customers recommend this product.
    5 Stars100%4 Stars0%3 Stars0%2 Stars0%1 Star0%
  2. David

    Die ¨¹berwachungsdaten sind sehr genau und helfen mir bei meiner Arbeit sehr.
    Und sie sind effizient.

    0 of 0 found this review helpful
  3. David

    Die ¨¹berwachungsdaten sind sehr genau und helfen mir bei meiner Arbeit sehr.
    Und sie sind effizient.

    0 of 0 found this review helpful
  4. Bob L

    Have used it on several customer cars. Easy to use and works great!

    0 of 0 found this review helpful
Leave A Review

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

PT660 Brake Pressure Gauge Pressure Gauge
AUTOOL PT660 Brake Pressure Gauge Pressure Gauge

US$359.00

In den Warenkorb Dieses Produkt weist mehrere Varianten auf. Die Optionen können auf der Produktseite gewählt werden