語言和貨幣
AUTOOL PT660 Dual-Channel Brake Pressure Gauge
US$359.00
主要特色
- Dual-Channel Comparison
- 0–210 Bar Range
- 3吋背光顯示屏
- Lock + Ambient Zero
- Dual-Channel Comparison: Measure two caliper pressure positions together and compare front/rear or left/right pressure behavior for hydraulic imbalance.
- 0–210 Bar Range: Cover 0–210 bar with ±1% FS accuracy and 0.1 display resolution.
- 3-Inch Backlit Display: Read pressure data on the 3-inch screen in bright or dim workshop conditions.
- Lock + Ambient Zero: Hold readings and zero the channels to ambient pressure with one-click controls.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL PT660 · Dual Brake Pressure Tester
Compare Two Brake Pressure Points at Once
Compare hydraulic pressure at two brake positions during the same test condition with this dual-channel brake pressure gauge. PT660 measures both channels across 0–210 bar, helping reveal front/rear or left/right imbalance without moving one gauge between points. Hold and ambient-zero controls support repeatable setup, while the backlit display keeps both readings visible.
- 0–210 Bar Brake Range
- Dual-Channel Brake Comparison
- Stated ±1% FS Accuracy
- Hold Both Channel Readings
- Ambient-Zero Both Channels
主要特色
Synchronous Left/Right Pressure Inputs
Dual-Channel Brake Pressure Detection
Detect two brake pressure channels through the L/R input slots, making it easier to compare front / rear or left / right brake pressure behavior.
Brake Pressure Balance Comparison
Supports simultaneous pressure comparison between two brake calipers, helping technicians capture pressure differences and observe brake-system pressure imbalance.
Stated ±1% FS Accuracy
Built-in high-precision sensor provides measurement accuracy up to ±1%FS for brake system pressure checking.
測量範圍廣
PT660 supports a 0–210 bar measurement range with 0.1 resolution and an operating temperature range of -10°C to +60°C, helping cover common internal brake-system pressure checks.
Smart 3-Inch Backlit Display
The 3-inch backlit digital display shows pressure data clearly in bright or dim workshop environments without complicated menu browsing.
One-Click Locking And Zeroing
Supports one-click locking and zeroing, zeroing to ambient pressure, and visualized data display for more efficient brake pressure measurement.
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
服務工作流程
Connect Both Sides and Compare Like Conditions
步驟進展1 / 6
01
Connect L/R Pressure Input
Connect the pressure input cable to the L/R slot according to the channel you need to test or compare.
02
Zero Before Testing
With both channels safely open to ambient pressure and unloaded, perform the user zero/tare step before connecting and pressurizing the brake system. This is a setup zero, not a traceable calibration.
03
Install Adapter
Connect the model-specific adapter to the measurement probe and confirm the connection is secure.
04
Select Unit And Wheel Direction
Select the required unit, such as psi, Bar, or kg/cm², and choose the wheel direction before testing.
05
開始測量
Press the Measurement button to start brake pressure measurement and monitor the pressure values on the display.
06
Review And Switch Units
After measurement is complete, review the results, compare pressure values, and switch units when needed.
安全使用
Control Hydraulic Pressure and Bleeding State
Use the Result for the Next Check
Compare both channels under the same pedal condition with brake-fluid-rated hoses and adapters. Investigate the relevant hydraulic circuit if an imbalance appears.
模型比較
Choose the Right Pressure Test Kit
模型指南
Choose one or more models. PT660 is selected by default.
已選擇 1 個模型
未選擇任何型號。請選擇一個型號進行比較。
| 產品描述* | PT610 Cylinder Pressure Gauge | PT620 Oil Pressure Gauge Kit | PT630 Fuel Pressure Gauge | PT635 Fuel Pressure Gauge(High-end version) | PT640 GDI Fuel Pressure Gauge | PT650 Transmission Oil Pressure Gauge | PT660 Brake System Pressure Tester |
|---|---|---|---|---|---|---|---|
| Measurement & Readout | |||||||
| 顯示屏 | 2.8英寸 | 2.8英寸 | 2.8英寸 | 2.8英寸 | 2.8英寸 | 2.8英寸 | 3英寸 |
| 資料存儲 | 6組數據 | × | × | × | × | × | Locks the current reading; check the current specification for multi-record storage. |
| 壓力範圍 | 0-426.6磅/平方英寸 0-30公斤/平方厘米 0-29.4bar | 0-426.6磅/平方英寸 0-30公斤/平方厘米 0-29.4bar | 0-426.6磅/平方英寸 0-30公斤/平方厘米 0-29.4bar | 0-426.6磅/平方英寸 0-30公斤/平方厘米 0-29.4bar | 0-5221.3磅/平方英寸 0-367公斤/平方厘米 0-360bar | 0-426.6磅/平方英寸 0-30公斤/平方厘米 0-29.4bar | 0–210 巴 |
| Dual-Channel Pressure Testing | × | × | × | × | × | × | Two brake positions/calipers via L/R channels |
| Data Lock/Clear/Record | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 多參數顯示 | Current Temp 測量時間 Real-Time Pressure Value Average Pressure Value Pressure value of each cylinder | 測量時間 壓力 最大壓力 最小壓力 高頻差動式測試棒 | 最大值 最低值 壓力差值 測量時間 Real-Time Pressure Value | 最大值 最低值 平均值 Temperature Value 測量時間 Real-Time Pressure Value | 最大值 最低值 壓力差值 測量時間 Real-Time Pressure Value | 最大值 最低值 壓力差值 測量時間 Real-Time Pressure Value | Left/right real-time pressure, minimum, maximum, and front/rear pressure difference |
| 壓力單位 | 幽 酒吧 公斤/平方厘米 | 幽 酒吧 公斤/平方厘米 | 幽 酒吧 公斤/平方厘米 | 幽 酒吧 公斤/平方厘米 | 幽 酒吧 公斤/平方厘米 | 幽 酒吧 公斤/平方厘米 | psi / bar / kg/cm² |
| 連接和應用 | |||||||
| 配件連接器 | 10類型 | 18類型 | 17類型 | 31類型 | 3類型 | 12類型 | Check the selected package contents for included adapter types and quantities. |
| Equipped Toolbox | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 適用場景 | 引擎汽缸 | Engine Oil Circulation System | 汽車燃油系統 | 汽車燃油系統 | Fuel Injection Pump Pressure in the Automotive Direct Injection System | Automotive Transmission Pressure | Internal brake-system fluid pressure; two-position/caliper comparison |
手冊和支持
Find the Manual and Adapter Guidance
AUTOOL PT660 User Manual
開啟PDF手冊 AUTOOL PT660 dual-channel brake-pressure testing, side-to-side comparison, unit selection, locking and zeroing, safe hydraulic connection and troubleshooting support.
包裝內容
看看盒子裡裝了什麼
- Order ScopeConfirm the exact included items for the selected package before ordering.
買家問題
Pressure Connection and Reading Questions
Do I Need To Zero The PT660 Before Testing?
Zero the PT660 to ambient pressure before every test to improve measurement reliability.
What Is The Measurement Range Of PT660?
PT660 supports a measurement range of 0-210Bar. Always pay attention to the measuring range before and during testing.
What Units Does PT660 Support?
PT660 supports psi, Bar, and kg/cm². The resolution is 0.1psi, 0.1Bar, and 0.1kg/cm².
Can PT660 Compare Two Brake Calipers?
Yes. PT660 supports dual-channel pressure measurement and can be used to compare the pressure of two brake calipers or two brake pressure positions through the L/R pressure input channels.
What Batteries Does PT660 Use?
PT660 uses 4 × 1.5V AAA batteries. Check battery level and battery condition before testing.
What Happens If The Measuring Range Is Exceeded?
If the measuring range is exceeded, the result may display the maximum or minimum value. Stop testing, confirm the pressure condition, and make sure the test is within the supported range.
What Should I Check Before Use?
Before use, check the batteries, pressure input cable, hoses, adapters, and all connections. Wear safety goggles and protective gloves when working near brake fluid or system fluid.
客戶評價
留言
鮑伯L ✓ 已驗證購買 -
偉大的品質
Have used it on several customer cars. Easy to use and works great!
大衛 ✓ 已驗證購買 -
Sehr schöne Maschine.
Die überwachungsdaten sind sehr genau und helfen mir bei meiner Arbeit sehr.
Und sie sind effizient.
大衛 ✓ 已驗證購買 -
Sehr schöne Maschine.
Die überwachungsdaten sind sehr genau und helfen mir bei meiner Arbeit sehr.
Und sie sind effizient.