AUTOOL ATF705 Automatic Transmission Fluid Exchanger
US$1,399.00
- Automatic Flow Direction
- Equal-Volume Exchange
- 20 L Tank + ATF Windows
- 5-Inch ATF Service Menus
- Automatic Flow Direction: Identify the connected ATF inlet and return route automatically.
- Equal-Volume Exchange: Balance new-fluid delivery with used-fluid recovery during the connected exchange sequence.
- 20 L Tank + ATF Windows: Monitor the 20 L fluid tank, used and new ATF windows, and mechanical pressure during service.
- 5-Inch ATF Service Menus: Access exchange, recovery, refilling, line-cleaning, and draining menus on the IPS screen.
- Connector Toolbox + Draining: Match varied transmission lines with the connector set and clear residual machine fluid using one-click tank draining.
- Automatic Flow Direction: Identify the connected ATF inlet and return route automatically.
- Equal-Volume Exchange: Balance new-fluid delivery with used-fluid recovery during the connected exchange sequence.
- 20 L Tank + ATF Windows: Monitor the 20 L fluid tank, used and new ATF windows, and mechanical pressure during service.
- 5-Inch ATF Service Menus: Access exchange, recovery, refilling, line-cleaning, and draining menus on the IPS screen.
- Connector Toolbox + Draining: Match varied transmission lines with the connector set and clear residual machine fluid using one-click tank draining.
- 3-Year Warranty Main unit 3 years · Accessories 1 year
- 90-Day Returns Eligible returns within 90 days
- Official Store Genuine products · Direct support
AUTOOL ATF705 · 5-Inch Guided ATF Exchanger
Guide Equal-Volume Exchange on a 5-Inch Screen
Guide an equal-volume ATF exchange from a 5-inch screen while the machine identifies the connected flow direction. ATF705 balances fresh-fluid delivery and used-fluid recovery, provides recovery, refilling, circulation, and draining functions, and keeps fluid levels and mechanical pressure visible. The connector toolbox supports varied compatible transmission lines.
- Automatic Flow Direction
- Equal-Volume ATF Exchange
- 5-Inch Guided Interface
- 20 L Fluid Tank
- New / Used Fluid Windows
Key Features
Automatic Direction with Visible Fluid Flow
Automatic Inlet / Return Detection
ATF705 detects the ATF flow direction (inlet/outlet) automatically, so technicians can connect and begin service without identifying the direction manually.
Automatic Equal-Volume ATF Exchange
The controller balances incoming and recovered fluid during exchange; complete the vehicle-specified final level check afterward.
Manual Circulating Flushing
Manual circulation lets the operator move fluid through the connected service route before the exchange sequence.
5-Inch HD IPS Screen
The 5-inch screen provides on-screen menus and service guidance for exchange, recovery, refilling, line cleaning, and draining.
One-Click Tank Draining
After the exchange, use the tank-draining function to remove residual fluid from the machine and speed up workshop cleanup.
Wide Connector Compatibility
The included connector toolbox supports many automatic transmissions used in European, American, Japanese, Korean, and Chinese vehicles.
Visual Monitoring
Sight glasses for used and new ATF, fluid-level windows, and a mechanical pressure gauge help technicians monitor fluid condition and pressure during the exchange.
Automatic Flow Detection
ATF705 identifies the ATF inlet and outlet direction automatically when the service hoses are connected correctly.
Connector Toolbox
The connector toolbox supports many automatic transmissions across European, American, Japanese, Korean, and Chinese vehicles. Confirm the supplied set and vehicle fitment for your order.
Controlled Circulating Flush
Select and control circulating flushing manually through the screen before the final ATF exchange.
5-Inch Service Interface
The 5-inch IPS screen provides service menus and guidance, with a multilingual interface for supported language settings.
Fluid And Pressure Monitoring
Used and new ATF windows, fluid-level windows, and a mechanical pressure gauge keep the service visible. The wheeled cabinet keeps hoses and service connections within reach.
Simple Draining Leaves Used ATF Behind
Traditional drain-and-fill service may remove only part of the used transmission fluid. Residual fluid, sludge, and metal debris can remain in the system and mix with new ATF.
Contaminated ATF Can Affect Performance
Contaminated transmission fluid can contribute to slow acceleration, shuddering or vibration during shifts, and overheating. When fluid service is overdue, it may also contribute to higher fuel consumption and shorter transmission service life.
Equal-Volume Exchange Helps Reduce Filling Errors
ATF705 balances used ATF output and new ATF input, reducing the risk of overfilling or underfilling during service.
Front Controls
Control panel, pressure gauge, sight glasses for used and new ATF, and fluid-level windows.
Rear Connections
Power switch and socket, inlet/outlet hose, drain hose, filter, and hose-flushing connector.
Mobility
Push handle, one-way casters, swivel casters, and a side hook for easier workshop movement and storage.
Control Panel
The control panel provides on-screen access to smart exchange, equal-volume exchange, used ATF recovery, new ATF refilling, line cleaning, and used ATF draining.
No Major Disassembly Required
ATF705 connects to accessible transmission fluid lines through quick-connect fittings, helping reduce unnecessary disassembly.
Organized for Daily Workshop Use
Frequently used controls, service connections, and components are grouped together to make setup and routine workshop service easier.
Typical Exchange Time Depends on Service Conditions
With the correct setup and service procedure, a typical ATF exchange takes about 20 minutes. Actual time depends on the vehicle, fluid condition, and service steps.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
Service Workflow
Connect, Identify Direction and Balance Exchange
Prepare Power and ATF
Step 01 Confirm the correct 110 V or 220 V AC version for your region and prepare the ATF specified by the vehicle manufacturer.
Lift and Secure the Vehicle
Step 02 Raise the vehicle so the drive wheels are at least 20 cm off the ground. Apply the parking brake and place wheel chocks in front of and behind the non-drive wheels.
Connect Transmission Fluid Lines
Step 03 Locate the transmission fluid line that runs between the transmission and radiator. Disconnect the accessible line, select the correct connectors, and connect the ATF705 hoses to the transmission line fittings.
Check for Leaks
Step 04 Start the engine as required by the service procedure. Check all hose and line connections for leaks, and continue only when every connection is secure.
Select the Service Function
Step 05 Use the screen menu to select the required service function. Available functions include smart exchange, equal-volume exchange, circulating flushing, line cleaning, used ATF recovery, new ATF refilling, and draining.
Shift Through the Gears
Step 06 During circulating flushing, keep the engine running when required and shift through the gears as directed. Hold each gear for about one minute when the service procedure calls for it.
Safe Use
Confirm Power Version, Adapter Fit and Final Level
Check the Unit Label Before Connecting Power
Before connecting power, follow the voltage information on the actual unit label and the user manual.
Secure Vehicle First
Lift the vehicle properly, keep the drive wheels off the ground, apply the parking brake, and use wheel chocks before shifting through the gears. Do not perform higher-speed wheel-rotation procedures on public roads or without proper lift safety.
Check Hoses Before Starting
Start operation only after confirming that all transmission fluid line fittings and hoses are secure and leak-free. Stop operation if hoses leak or connectors become loose.
Use Correct ATF
Transmission fluid specifications vary by vehicle. Use the ATF recommended by the vehicle manufacturer and do not mix unsuitable fluids.
Avoid Overfilling or Underfilling
Overfilling or underfilling may damage an automatic transmission. Monitor the exchange process and follow the screen prompts and user manual.
Allow Enough Flushing Time
Use more than 20 minutes for circulating flushing when the vehicle-specific service procedure requires extended flushing.
Use Controlled Workshop Conditions for Higher-Speed Procedures
Only perform higher-speed wheel-rotation procedures when the vehicle is safely lifted and the drive wheels are off the ground. Trained technicians must follow workshop safety procedures throughout. If a service procedure requires the drive wheels to run at or above 60 km/h, do so only under controlled workshop conditions.
Choose The Correct Voltage
ATF705 is available in 110V and 220V AC versions. Match the unit label and power supply before connecting the machine.
Result Guide
Verify Transfer, Level and Reconnection
Verify the Result
Use the fluid windows as a process aid, then restore the circuit, set the final fluid level by the vehicle procedure and inspect for leaks.
Model Comparison
Choose the Right ATF Exchanger
Model Guide
Choose one or more models. ATF705 is selected by default.
| Product Model | ATF702 | ATF705 | ATF802 | ATF805 |
|---|---|---|---|---|
| Core Exchange & Automation | ||||
| Operation Method | Mechanical Control | Electronic Control | Electronic Control | Electronic Control |
| Operation Guide | × | ✓ | ✓ | ✓ |
| Smart Exchange | × | ✓ | ✓ | ✓ |
| Smart Cleaning Exchange | × | × | × | ✓ |
| Automatic Identification of Oil Inlet and Outlet | × | ✓ | ✓ | ✓ |
| Pipeline Self-Flushing | × | ✓ | ✓ | ✓ |
| Circulating Flushing | Manual | Manual | Automatic | Automatic |
| Circulating Oil Exchange (Equal Volume Exchange) | Manual | Automatic | Automatic | Automatic |
| New Oil Refilling | Manual | Automatic | Automatic | Automatic |
| Used Oil Recovery | Manual | Automatic | Automatic | Automatic |
| New Oil Tank Emptying | Manual | Automatic | Automatic | Automatic |
| Old Oil Tank Emptying | Manual | Automatic | Automatic | Automatic |
| New Oil Tank Electric Refilling | Manual | Manual | Automatic | Automatic |
| Power & Physical Setup | ||||
| Power Supply | DC12V | Match the selected power configuration | 110V/220V | 110V/220V |
| Maximum Power | <150W | <150W | <150W | <150W |
| Noise | <70 dB | <70 dB | <70 dB | <70 dB |
| Oil Tank | 20L | 20L | 20L | 20L |
| Net Weight | 45.8KG | 47KG | 53KG | 56KG |
| Gross Weight | 54.2KG | 59.5KG | 77.5KG | 82KG |
| Oil Exchange Hose | 2.5m | 2.5m | 2.5m | 2.5m |
| Oil Drain Hose | × | 1.5m | 1.5m | 1.5m |
| Power Cord | 3m | 3m | 3m | 3m |
| Fluid Control & Visibility | ||||
| Oil Pump | Single Oil Pump | Single Oil Pump | Dual Oil Pump | Dual Oil Pump |
| Pressure Gauge | 2 Mechanical Pressure Gauge 10kg/cm² | 1 Mechanical Pressure Gauge 10kg/cm² | 2 Mechanical Pressure Gauge 10kg/cm² | Electronic 10kg/cm² |
| New Fluid Heating | × | × | × | ✓ |
| Oil Temperature Display | × | × | × | ✓ |
| Oil Filter and Replacement Reminder | No Replacement Reminder | No Replacement Reminder | ✓ | ✓ |
| Real-Time Display of Oil Tank Level | × | ✓ | ✓ | ✓ |
| Oil Exchange Window | ✓ | ✓ | ✓ | ✓ |
| Liquid Level Window | ✓ | ✓ | ✓ | ✓ |
| Sampling Window | × | × | × | ✓ |
| Oil Exchange Window Backlight | × | ✓ | ✓ | ✓ |
| Liquid Level Window Backlight | ✓ | ✓ | ✓ | ✓ |
| Interface, Records & Software | ||||
| Screen | × | 5-inch IPS Screen | 5-inch IPS Screen | 7-inch IPS Screen |
| Data Printing | × | × | × | ✓ |
| Buzzer Alert | × | ✓ | ✓ | ✓ |
| Data Entry Keyboard | × | × | × | ✓ |
| Oil Exchange Database | × | × | ✓ | ✓ |
| System Update | × | × | USB Update | USB Update |
| Language Settings | × | Chinese, English, Spanish, French, German, Russian, Portuguese, Vietnamese, Malaysian | Chinese, English, Spanish, French, German, Russian, Portuguese, Vietnamese, Malaysian | Chinese, English, Spanish, French, German, Russian, Portuguese, Vietnamese, Malaysian |
Manual & Support
Find the Manual and Fitment Guidance
AUTOOL ATF705 User Manual
Open the PDF manual for AUTOOL ATF705 equal-volume ATF exchange, flow-direction detection, circulation and tank draining, connector selection, fluid compatibility, safety and troubleshooting support.
Package Contents
See What Comes in the Box
- Main UnitAUTOOL ATF705 automatic transmission fluid exchanger
- Connector ToolboxSpecialized connectors and service accessories
- User ManualAUTOOL ATF705 user manual
- Check Fitment Before OrderingConfirm connector compatibility with your vehicle if you are unsure
Buyer Questions
ATF Setup, Fit and Service Questions
What Is the Main Difference Between ATF705 and ATF702?
ATF702 uses mechanical control, 12 V DC power, no screen, and manual circulating flushing and ATF exchange. ATF705 adds electronic control and 110/220 V AC power, plus a 5-inch IPS screen. It also adds automatic flow-direction detection, automatic equal-volume exchange, buzzer alerts, and backlit exchange and fluid-level windows.
Does ATF705 Support Automatic Equal-Volume ATF Exchange?
Yes. ATF705 performs automatic equal-volume ATF exchange with an exchange error of less than 0.2 kg. This helps keep used ATF output and new ATF input balanced during service.
Which Voltage Version Should I Order?
ATF705 is available in 110 V and 220 V AC versions. Confirm the correct version for your region before ordering, then follow the unit label and user manual when connecting power.
Can ATF705 Be Used on Gasoline and Diesel Vehicles?
Yes. Use ATF705 to service automatic transmissions in gasoline and diesel vehicles. Its specialized connectors support many transmissions used in European, American, Japanese, Korean, and Chinese vehicles. Confirm connector compatibility if you are unsure.
How Long Does the ATF Exchange Take?
With the correct setup and service procedure, a typical ATF exchange takes about 20 minutes. Under those conditions, the ATF exchange rate is over 90%. If the vehicle-specific procedure requires extended circulating flushing, run it for more than 20 minutes.
What Should I Check Before Starting Operation?
Before starting, confirm the correct voltage version, ATF type, vehicle stability, wheel chocks, and connector fitment. Check that all hoses and transmission fluid line connections are secure and leak-free. Do not start operation if the vehicle is unstable, a connection leaks, or the power supply does not match the unit.
What Is Included in the ATF705 Package?
The package includes the ATF705 main unit, connector toolbox, and user manual. The exact connector set may vary with the package configuration you order. Check your order details or contact support if you need to confirm a specific connector.
What Warranty and Support Does ATF705 Include?
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
Nigel Smith ✓ Verified Purchase –
Using this transmission fluid changer has made operation so much easier.
Using this transmission fluid changer has made operation so much easier. No lines need to be disconnected; it’s almost fully automatic, saving a lot of effort. The fluid level is very accurate, and it’s noticeably cleaner than a manual change.
Neil Porter ✓ Verified Purchase –
What stands out most is its efficiency — the ATF705 can complete cleaning and…
What stands out most is its efficiency — the ATF705 can complete cleaning and fluid replacement for the transmission, torque converter, and transmission cooler in as little as 20 minutes. With an oil replacement rate exceeding 90%, it ensures a far more thorough fluid change compared to traditional manual methods.
The intelligent system automatically identifies oil inlet and outlet directions, and its program-controlled equal exchange function keeps fluid levels balanced during operation. This not only prevents potential transmission damage but also guarantees consistent, reliable results.
Jerome Henrietta ✓ Verified Purchase –
I received my transmission oil change kit very quickly, and it looks like it's…
I received my transmission oil change kit very quickly, and it looks like it’s of good quality. With this kit, changing transmission oil will be faster and more convenient. I am very satisfied with AUTOOL’s service and will purchase again!