語言和貨幣
AUTOOL ATF705自排變速箱油交換器
US$1,399.00
主要特色
- 自動流向
- Equal-Volume Exchange
- 20 L Tank + ATF Windows
- 5-Inch ATF Service Menus
- Automatic Flow Direction: Identify the connected ATF inlet and return route automatically.
- Equal-Volume Exchange: Balance new-fluid delivery with used-fluid recovery during the connected exchange sequence.
- 20 L Tank + ATF Windows: Monitor the 20 L fluid tank, used and new ATF windows, and mechanical pressure during service.
- 5-Inch ATF Service Menus: Access exchange, recovery, refilling, line-cleaning, and draining menus on the IPS screen.
- Connector Toolbox + Draining: Match varied transmission lines with the connector set and clear residual machine fluid using one-click tank draining.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL ATF705 · 5-Inch Guided ATF Exchanger
Guide Equal-Volume Exchange on a 5-Inch Screen
Guide an equal-volume ATF exchange from a 5-inch screen while the machine identifies the connected flow direction. ATF705 balances fresh-fluid delivery and used-fluid recovery, provides recovery, refilling, circulation, and draining functions, and keeps fluid levels and mechanical pressure visible. The connector toolbox supports varied compatible transmission lines.
- 自動流向
- Equal-Volume ATF Exchange
- 5-Inch Guided Interface
- 20公升液體罐
- New / Used Fluid Windows
主要特色
Automatic Direction with Visible Fluid Flow
Automatic Inlet / Return Detection
ATF705 detects the ATF flow direction (inlet/outlet) automatically, so technicians can connect and begin service without identifying the direction manually.
Automatic Equal-Volume ATF Exchange
The controller balances incoming and recovered fluid during exchange; complete the vehicle-specified final level check afterward.
Manual Circulating Flushing
Manual circulation lets the operator move fluid through the connected service route before the exchange sequence.
5-Inch HD IPS Screen
The 5-inch screen provides on-screen menus and service guidance for exchange, recovery, refilling, line cleaning, and draining.
One-Click Tank Draining
After the exchange, use the tank-draining function to remove residual fluid from the machine and speed up workshop cleanup.
Wide Connector Compatibility
The included connector toolbox supports many automatic transmissions used in European, American, Japanese, Korean, and Chinese vehicles.
視覺化監控
Sight glasses for used and new ATF, fluid-level windows, and a mechanical pressure gauge help technicians monitor fluid condition and pressure during the exchange.
Automatic Flow Detection
ATF705 identifies the ATF inlet and outlet direction automatically when the service hoses are connected correctly.
Connector Toolbox
The connector toolbox supports many automatic transmissions across European, American, Japanese, Korean, and Chinese vehicles. Confirm the supplied set and vehicle fitment for your order.
Controlled Circulating Flush
Select and control circulating flushing manually through the screen before the final ATF exchange.
5-Inch Service Interface
The 5-inch IPS screen provides service menus and guidance, with a multilingual interface for supported language settings.
Fluid And Pressure Monitoring
Used and new ATF windows, fluid-level windows, and a mechanical pressure gauge keep the service visible. The wheeled cabinet keeps hoses and service connections within reach.
Simple Draining Leaves Used ATF Behind
Traditional drain-and-fill service may remove only part of the used transmission fluid. Residual fluid, sludge, and metal debris can remain in the system and mix with new ATF.
Contaminated ATF Can Affect Performance
Contaminated transmission fluid can contribute to slow acceleration, shuddering or vibration during shifts, and overheating. When fluid service is overdue, it may also contribute to higher fuel consumption and shorter transmission service life.
Equal-Volume Exchange Helps Reduce Filling Errors
ATF705 balances used ATF output and new ATF input, reducing the risk of overfilling or underfilling during service.
Front Controls
Control panel, pressure gauge, sight glasses for used and new ATF, and fluid-level windows.
後連接
Power switch and socket, inlet/outlet hose, drain hose, filter, and hose-flushing connector.
高流動性
Push handle, one-way casters, swivel casters, and a side hook for easier workshop movement and storage.
控制面板
The control panel provides on-screen access to smart exchange, equal-volume exchange, used ATF recovery, new ATF refilling, line cleaning, and used ATF draining.
No Major Disassembly Required
ATF705 connects to accessible transmission fluid lines through quick-connect fittings, helping reduce unnecessary disassembly.
Organized for Daily Workshop Use
Frequently used controls, service connections, and components are grouped together to make setup and routine workshop service easier.
Typical Exchange Time Depends on Service Conditions
With the correct setup and service procedure, a typical ATF exchange takes about 20 minutes. Actual time depends on the vehicle, fluid condition, and service steps.
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
服務工作流程
Connect, Identify Direction and Balance Exchange
步驟進展1 / 6
01
Prepare Power and ATF
Step 01 Confirm the correct 110 V or 220 V AC version for your region and prepare the ATF specified by the vehicle manufacturer.
02
Lift and Secure the Vehicle
Step 02 Raise the vehicle so the drive wheels are at least 20 cm off the ground. Apply the parking brake and place wheel chocks in front of and behind the non-drive wheels.
03
Connect Transmission Fluid Lines
Step 03 Locate the transmission fluid line that runs between the transmission and radiator. Disconnect the accessible line, select the correct connectors, and connect the ATF705 hoses to the transmission line fittings.
04
檢查洩漏
Step 04 Start the engine as required by the service procedure. Check all hose and line connections for leaks, and continue only when every connection is secure.
05
Select the Service Function
Step 05 Use the screen menu to select the required service function. Available functions include smart exchange, equal-volume exchange, circulating flushing, line cleaning, used ATF recovery, new ATF refilling, and draining.
06
Shift Through the Gears
Step 06 During circulating flushing, keep the engine running when required and shift through the gears as directed. Hold each gear for about one minute when the service procedure calls for it.
安全使用
Confirm Power Version, Adapter Fit and Final Level
Check the Unit Label Before Connecting Power
Before connecting power, follow the voltage information on the actual unit label and the user manual.
Secure Vehicle First
Lift the vehicle properly, keep the drive wheels off the ground, apply the parking brake, and use wheel chocks before shifting through the gears. Do not perform higher-speed wheel-rotation procedures on public roads or without proper lift safety.
Check Hoses Before Starting
Start operation only after confirming that all transmission fluid line fittings and hoses are secure and leak-free. Stop operation if hoses leak or connectors become loose.
Use Correct ATF
Transmission fluid specifications vary by vehicle. Use the ATF recommended by the vehicle manufacturer and do not mix unsuitable fluids.
Avoid Overfilling or Underfilling
Overfilling or underfilling may damage an automatic transmission. Monitor the exchange process and follow the screen prompts and user manual.
Allow Enough Flushing Time
Use more than 20 minutes for circulating flushing when the vehicle-specific service procedure requires extended flushing.
Use Controlled Workshop Conditions for Higher-Speed Procedures
Only perform higher-speed wheel-rotation procedures when the vehicle is safely lifted and the drive wheels are off the ground. Trained technicians must follow workshop safety procedures throughout. If a service procedure requires the drive wheels to run at or above 60 km/h, do so only under controlled workshop conditions.
Choose The Correct Voltage
ATF705 is available in 110V and 220V AC versions. Match the unit label and power supply before connecting the machine.
結果指南
驗證傳輸、等級和重新連接
驗證結果
使用液位視窗作為操作輔助手段，然後恢復電路，按照車輛程序設定最終液位，並檢查是否有洩漏。
模型比較
Choose the Right ATF Exchanger
模型指南
選擇一個或多個型號。預設選擇 ATF705。
已選擇 1 個模型
未選擇任何型號。請選擇一個型號進行比較。
| 產品型號 | ATF702 | ATF705 | ATF802 | ATF805 |
|---|---|---|---|---|
| 核心交換與自動化 | ||||
| 操作方法 | 機械控制 | 電子控制 | 電子控制 | 電子控制 |
| 操作指南 | × | ✓ | ✓ | ✓ |
| 智慧交易所 | × | ✓ | ✓ | ✓ |
| 智慧清潔交流平台 | × | × | × | ✓ |
| 自動識別油入口和出口 | × | ✓ | ✓ | ✓ |
| 管道自沖洗 | × | ✓ | ✓ | ✓ |
| 循環沖洗 | 手動操作 | 手動操作 | Automatic 自動錶 | Automatic 自動錶 |
| 循環油交換（等量交換） | 手動操作 | Automatic 自動錶 | Automatic 自動錶 | Automatic 自動錶 |
| 新油加註 | 手動操作 | Automatic 自動錶 | Automatic 自動錶 | Automatic 自動錶 |
| 廢油回收 | 手動操作 | Automatic 自動錶 | Automatic 自動錶 | Automatic 自動錶 |
| 新油罐排空 | 手動操作 | Automatic 自動錶 | Automatic 自動錶 | Automatic 自動錶 |
| 舊油槽清空 | 手動操作 | Automatic 自動錶 | Automatic 自動錶 | Automatic 自動錶 |
| 新型油箱電動加註 | 手動操作 | 手動操作 | Automatic 自動錶 | Automatic 自動錶 |
| 電源和物理設定 | ||||
| 電源供應 | DC12V | 匹配所選的電源配置 | 110V / 220V | 110V / 220V |
| 最大功率 | ||||
| Noise | ||||
| 油箱 | 20L | 20L | 20L | 20L |
| 淨重 | 45.8KG | 47KG | 53KG | 56KG |
| 毛重 | 54.2KG | 59.5KG | 77.5KG | 82KG |
| 換油軟管 | 2.5m | 2.5m | 2.5m | 2.5m |
| 放油軟管 | × | 1.5m | 1.5m | 1.5m |
| 電源線 | 3m | 3m | 3m | 3m |
| 流體控制與可視性 | ||||
| 油泵 | 單油泵 | 單油泵 | 雙油泵 | 雙油泵 |
| 壓力計 | 2 Mechanical Pressure Gauge 10公斤/平方厘米 | 1 Mechanical Pressure Gauge 10公斤/平方厘米 | 2 Mechanical Pressure Gauge 10公斤/平方厘米 | 電子產品 10公斤/平方厘米 |
| 新型流體加熱 | × | × | × | ✓ |
| 油溫顯示 | × | × | × | ✓ |
| 機油濾清器及更換提醒 | 無更換提醒 | 無更換提醒 | ✓ | ✓ |
| 即時顯示油箱液位 | × | ✓ | ✓ | ✓ |
| 石油交換窗口 | ✓ | ✓ | ✓ | ✓ |
| 液位視窗 | ✓ | ✓ | ✓ | ✓ |
| 採樣視窗 | × | × | × | ✓ |
| 換油窗口背光 | × | ✓ | ✓ | ✓ |
| 液位窗口背光 | ✓ | ✓ | ✓ | ✓ |
| 介面、記錄和軟體 | ||||
| 屏幕 | × | 5吋IPS螢幕 | 5吋IPS螢幕 | 7吋IPS螢幕 |
| 數據打印 | × | × | × | ✓ |
| 蜂鳴器警報 | × | ✓ | ✓ | ✓ |
| 資料輸入鍵盤 | × | × | × | ✓ |
| 石油交易資料庫 | × | × | ✓ | ✓ |
| 系統更新 | × | × | USB 更新 | USB 更新 |
| 語言設定 | × | 中文、英文、西班牙文、法文、德文、俄文、葡萄牙文、越南文、馬來文 | 中文、英文、西班牙文、法文、德文、俄文、葡萄牙文、越南文、馬來文 | 中文、英文、西班牙文、法文、德文、俄文、葡萄牙文、越南文、馬來文 |
手冊和支持
尋找使用手冊和安裝指南
AUTOOL ATF705 使用手冊
開啟PDF手冊 AUTOOL ATF705 equal-volume ATF exchange, flow-direction detection, circulation and tank draining, connector selection, fluid compatibility, safety and troubleshooting support.
包裝內容
看看盒子裡裝了什麼
- 主機AUTOOL ATF705 自排變速箱油交換器
- Connector ToolboxSpecialized connectors and service accessories
- 用戶手冊AUTOOL ATF705 user manual
- Check Fitment Before OrderingConfirm connector compatibility with your vehicle if you are unsure
買家問題
ATF 設定、適配和服務問題
What Is the Main Difference Between ATF705 and ATF702?
ATF702 uses mechanical control, 12 V DC power, no screen, and manual circulating flushing and ATF exchange. ATF705 adds electronic control and 110/220 V AC power, plus a 5-inch IPS screen. It also adds automatic flow-direction detection, automatic equal-volume exchange, buzzer alerts, and backlit exchange and fluid-level windows.
Does ATF705 Support Automatic Equal-Volume ATF Exchange?
Yes. ATF705 performs automatic equal-volume ATF exchange with an exchange error of less than 0.2 kg. This helps keep used ATF output and new ATF input balanced during service.
Which Voltage Version Should I Order?
ATF705 is available in 110 V and 220 V AC versions. Confirm the correct version for your region before ordering, then follow the unit label and user manual when connecting power.
Can ATF705 Be Used on Gasoline and Diesel Vehicles?
Yes. Use ATF705 to service automatic transmissions in gasoline and diesel vehicles. Its specialized connectors support many transmissions used in European, American, Japanese, Korean, and Chinese vehicles. Confirm connector compatibility if you are unsure.
How Long Does the ATF Exchange Take?
With the correct setup and service procedure, a typical ATF exchange takes about 20 minutes. Under those conditions, the ATF exchange rate is over 90%. If the vehicle-specific procedure requires extended circulating flushing, run it for more than 20 minutes.
What Should I Check Before Starting Operation?
Before starting, confirm the correct voltage version, ATF type, vehicle stability, wheel chocks, and connector fitment. Check that all hoses and transmission fluid line connections are secure and leak-free. Do not start operation if the vehicle is unstable, a connection leaks, or the power supply does not match the unit.
What Is Included in the ATF705 Package?
The package includes the ATF705 main unit, connector toolbox, and user manual. The exact connector set may vary with the package configuration you order. Check your order details or contact support if you need to confirm a specific connector.
What Warranty and Support Does ATF705 Include?
主機：三年保固。標準配件：一年保固。保固政策。
客戶評價
留言
奈傑爾史密斯 ✓ 已驗證購買 -
Using this transmission fluid changer has made operation so much easier.
Using this transmission fluid changer has made operation so much easier. No lines need to be disconnected; it’s almost fully automatic, saving a lot of effort. The fluid level is very accurate, and it’s noticeably cleaner than a manual change.
尼爾·波特 ✓ 已驗證購買 -
What stands out most is its efficiency — the ATF705 can complete cleaning and…
What stands out most is its efficiency — the ATF705 can complete cleaning and fluid replacement for the transmission, torque converter, and transmission cooler in as little as 20 minutes. With an oil replacement rate exceeding 90%, it ensures a far more thorough fluid change compared to traditional manual methods.
The intelligent system automatically identifies oil inlet and outlet directions, and its program-controlled equal exchange function keeps fluid levels balanced during operation. This not only prevents potential transmission damage but also guarantees consistent, reliable results.
Jerome Henrietta ✓ 已驗證購買 -
I received my transmission oil change kit very quickly, and it looks like it's…
I received my transmission oil change kit very quickly, and it looks like it’s of good quality. With this kit, changing transmission oil will be faster and more convenient. I am very satisfied with AUTOOL’s service and will purchase again!