JAZYK A MĚNA
AUTOOL Výměna oleje do automatické převodovky ATF705
US$1,399.00
KLÍČOVÉ VLASTNOSTI
- Automatic Flow Direction
- Výměna stejného objemu
- 20 L Tank + ATF Windows
- 5-Inch ATF Service Menus
- Automatic Flow Direction: Identify the connected ATF inlet and return route automatically.
- Equal-Volume Exchange: Balance new-fluid delivery with used-fluid recovery during the connected exchange sequence.
- 20 L Tank + ATF Windows: Monitor the 20 L fluid tank, used and new ATF windows, and mechanical pressure during service.
- 5-Inch ATF Service Menus: Access exchange, recovery, refilling, line-cleaning, and draining menus on the IPS screen.
- Connector Toolbox + Draining: Match varied transmission lines with the connector set and clear residual machine fluid using one-click tank draining.
☰ VYŽÁDEJTE SI HROMADNOU / B2B NABÍDKUOficiální žádost o cenovou nabídku
Načítání formuláře žádosti...
- 3-letá záruka Hlavní jednotka 3 roky · Příslušenství 1 rok
- Návrat 90-Day Možnost vrácení zboží do 90 dnů
- Oficiální obchod Originální produkty · Přímá podpora
AUTOOL ATF705 · 5-Inch Guided ATF Exchanger
Guide Equal-Volume Exchange on a 5-Inch Screen
Guide an equal-volume ATF exchange from a 5-inch screen while the machine identifies the connected flow direction. ATF705 balances fresh-fluid delivery and used-fluid recovery, provides recovery, refilling, circulation, and draining functions, and keeps fluid levels and mechanical pressure visible. The connector toolbox supports varied compatible transmission lines.
- Automatic Flow Direction
- Equal-Volume ATF Exchange
- 5-Inch Guided Interface
- 20litrová nádrž na kapalinu
- New / Used Fluid Windows
KLÍČOVÉ VLASTNOSTI
Automatic Direction with Visible Fluid Flow
Automatic Inlet / Return Detection
ATF705 detects the ATF flow direction (inlet/outlet) automatically, so technicians can connect and begin service without identifying the direction manually.
Automatic Equal-Volume ATF Exchange
The controller balances incoming and recovered fluid during exchange; complete the vehicle-specified final level check afterward.
Ruční cirkulační proplachování
Ruční cirkulace umožňuje obsluze přesunout kapalinu připojenou servisní trasou před zahájením výměny.
5-Inch HD IPS Screen
The 5-inch screen provides on-screen menus and service guidance for exchange, recovery, refilling, line cleaning, and draining.
One-Click Tank Draining
After the exchange, use the tank-draining function to remove residual fluid from the machine and speed up workshop cleanup.
Wide Connector Compatibility
The included connector toolbox supports many automatic transmissions used in European, American, Japanese, Korean, and Chinese vehicles.
Vizuální monitorování
Sight glasses for used and new ATF, fluid-level windows, and a mechanical pressure gauge help technicians monitor fluid condition and pressure during the exchange.
Automatic Flow Detection
ATF705 identifies the ATF inlet and outlet direction automatically when the service hoses are connected correctly.
Connector Toolbox
The connector toolbox supports many automatic transmissions across European, American, Japanese, Korean, and Chinese vehicles. Confirm the supplied set and vehicle fitment for your order.
Controlled Circulating Flush
Select and control circulating flushing manually through the screen before the final ATF exchange.
5-Inch Service Interface
The 5-inch IPS screen provides service menus and guidance, with a multilingual interface for supported language settings.
Fluid And Pressure Monitoring
Used and new ATF windows, fluid-level windows, and a mechanical pressure gauge keep the service visible. The wheeled cabinet keeps hoses and service connections within reach.
Simple Draining Leaves Used ATF Behind
Traditional drain-and-fill service may remove only part of the used transmission fluid. Residual fluid, sludge, and metal debris can remain in the system and mix with new ATF.
Contaminated ATF Can Affect Performance
Contaminated transmission fluid can contribute to slow acceleration, shuddering or vibration during shifts, and overheating. When fluid service is overdue, it may also contribute to higher fuel consumption and shorter transmission service life.
Equal-Volume Exchange Helps Reduce Filling Errors
ATF705 balances used ATF output and new ATF input, reducing the risk of overfilling or underfilling during service.
Front Controls
Control panel, pressure gauge, sight glasses for used and new ATF, and fluid-level windows.
Zadní připojení
Power switch and socket, inlet/outlet hose, drain hose, filter, and hose-flushing connector.
Pohyblivost
Push handle, one-way casters, swivel casters, and a side hook for easier workshop movement and storage.
řídicí panel
The control panel provides on-screen access to smart exchange, equal-volume exchange, used ATF recovery, new ATF refilling, line cleaning, and used ATF draining.
No Major Disassembly Required
ATF705 connects to accessible transmission fluid lines through quick-connect fittings, helping reduce unnecessary disassembly.
Organized for Daily Workshop Use
Frequently used controls, service connections, and components are grouped together to make setup and routine workshop service easier.
Typical Exchange Time Depends on Service Conditions
With the correct setup and service procedure, a typical ATF exchange takes about 20 minutes. Actual time depends on the vehicle, fluid condition, and service steps.
3 roky záruční podpory
Hlavní jednotka: 3letá záruka. Standardní příslušenství: 1letá záruka. Záruční podmínky.
Pracovní postup služby
Connect, Identify Direction and Balance Exchange
Postup kroků1 / 6
01
Prepare Power and ATF
Step 01 Confirm the correct 110 V or 220 V AC version for your region and prepare the ATF specified by the vehicle manufacturer.
02
Zvedněte a zajistěte vozidlo
Step 02 Raise the vehicle so the drive wheels are at least 20 cm off the ground. Apply the parking brake and place wheel chocks in front of and behind the non-drive wheels.
03
Connect Transmission Fluid Lines
Step 03 Locate the transmission fluid line that runs between the transmission and radiator. Disconnect the accessible line, select the correct connectors, and connect the ATF705 hoses to the transmission line fittings.
04
Zkontrolujte, zda nedochází k únikům
Step 04 Start the engine as required by the service procedure. Check all hose and line connections for leaks, and continue only when every connection is secure.
05
Select the Service Function
Step 05 Use the screen menu to select the required service function. Available functions include smart exchange, equal-volume exchange, circulating flushing, line cleaning, used ATF recovery, new ATF refilling, and draining.
06
Shift Through the Gears
Step 06 During circulating flushing, keep the engine running when required and shift through the gears as directed. Hold each gear for about one minute when the service procedure calls for it.
Bezpečné používání
Confirm Power Version, Adapter Fit and Final Level
Check the Unit Label Before Connecting Power
Before connecting power, follow the voltage information on the actual unit label and the user manual.
Secure Vehicle First
Lift the vehicle properly, keep the drive wheels off the ground, apply the parking brake, and use wheel chocks before shifting through the gears. Do not perform higher-speed wheel-rotation procedures on public roads or without proper lift safety.
Check Hoses Before Starting
Start operation only after confirming that all transmission fluid line fittings and hoses are secure and leak-free. Stop operation if hoses leak or connectors become loose.
Use Correct ATF
Transmission fluid specifications vary by vehicle. Use the ATF recommended by the vehicle manufacturer and do not mix unsuitable fluids.
Avoid Overfilling or Underfilling
Overfilling or underfilling may damage an automatic transmission. Monitor the exchange process and follow the screen prompts and user manual.
Nechte dostatek času na proplachování
Use more than 20 minutes for circulating flushing when the vehicle-specific service procedure requires extended flushing.
Use Controlled Workshop Conditions for Higher-Speed Procedures
Only perform higher-speed wheel-rotation procedures when the vehicle is safely lifted and the drive wheels are off the ground. Trained technicians must follow workshop safety procedures throughout. If a service procedure requires the drive wheels to run at or above 60 km/h, do so only under controlled workshop conditions.
Choose The Correct Voltage
ATF705 is available in 110V and 220V AC versions. Match the unit label and power supply before connecting the machine.
Průvodce výsledky
Verify Transfer, Level and Reconnection
Ověřte výsledek
Použijte okénka pro kontrolu hladiny kapaliny jako pomůcku při práci, poté obnovte okruh, nastavte konečnou hladinu kapaliny podle postupu vozidla a zkontrolujte, zda nedochází k únikům.
Porovnání modelů
Vyberte si správný výměník kapaliny ATF
Průvodce modelem
Vyberte jeden nebo více modelů. Ve výchozím nastavení je vybrán ATF705.
Vybrán 1 model
Není vybrán žádný model. Vyberte model k porovnání.
| Model | ATF702 | ATF705 | ATF802 | ATF805 |
|---|---|---|---|---|
| Výměna a automatizace jádra | ||||
| provoz Metoda | Mechanické ovládání | Elektronické ovládání | Elektronické ovládání | Elektronické ovládání |
| Návod k obsluze | × | ✓ | ✓ | ✓ |
| Chytrá výměna | × | ✓ | ✓ | ✓ |
| Chytrá úklidová burza | × | × | × | ✓ |
| Automatická identifikace vstupu a výstupu oleje | × | ✓ | ✓ | ✓ |
| Samoproplachování potrubí | × | ✓ | ✓ | ✓ |
| Cirkulující proplachování | Manuál | Manuál | Automatický | Automatický |
| Výměna cirkulující ropy (výměna stejného objemu) | Manuál | Automatický | Automatický | Automatický |
| Doplnění nového oleje | Manuál | Automatický | Automatický | Automatický |
| Recyklace použitého oleje | Manuál | Automatický | Automatický | Automatický |
| Vyprázdnění nové olejové nádrže | Manuál | Automatický | Automatický | Automatický |
| Vyprazdňování staré olejové nádrže | Manuál | Automatický | Automatický | Automatický |
| Nové elektrické doplňování olejové nádrže | Manuál | Manuál | Automatický | Automatický |
| Napájení a fyzické nastavení | ||||
| napájení | DC12V | Přizpůsobte vybranou konfiguraci napájení | 110V / 220V | 110V / 220V |
| Maximální výkon | ||||
| Hluk | ||||
| Olejová nádrž | 20L | 20L | 20L | 20L |
| Čistá Hmotnost | 45.8KG | 47KG | 53KG | 56KG |
| Celková hmotnost | 54.2KG | 59.5KG | 77.5KG | 82KG |
| Hadice pro výměnu oleje | 2.5m | 2.5m | 2.5m | 2.5m |
| Hadice pro vypouštění oleje | × | 1.5m | 1.5m | 1.5m |
| Napájecí kabel | 3m | 3m | 3m | 3m |
| Řízení a viditelnost tekutin | ||||
| Olejové čerpadlo | Jedno olejové čerpadlo | Jedno olejové čerpadlo | Dvojité olejové čerpadlo | Dvojité olejové čerpadlo |
| tlakoměr | 2 Mechanický tlakoměr 10 kg / cm² | 1 Mechanický tlakoměr 10 kg / cm² | 2 Mechanický tlakoměr 10 kg / cm² | Elektronický 10 kg / cm² |
| Nové ohřevné kapaliny | × | × | × | ✓ |
| Zobrazení teploty oleje | × | × | × | ✓ |
| Olejový filtr a připomenutí výměny | Připomenutí nutnosti výměny | Připomenutí nutnosti výměny | ✓ | ✓ |
| Zobrazení hladiny oleje v nádrži v reálném čase | × | ✓ | ✓ | ✓ |
| Okno pro výměnu oleje | ✓ | ✓ | ✓ | ✓ |
| Okénko hladiny kapaliny | ✓ | ✓ | ✓ | ✓ |
| Vzorkovací okno | × | × | × | ✓ |
| Podsvícení okna pro výměnu oleje | × | ✓ | ✓ | ✓ |
| Podsvícení okénka hladiny kapaliny | ✓ | ✓ | ✓ | ✓ |
| Rozhraní, záznamy a software | ||||
| Obrazovka | × | 5palcová obrazovka IPS | 5palcová obrazovka IPS | 7palcová obrazovka IPS |
| Tisk dat | × | × | × | ✓ |
| Upozornění bzučákem | × | ✓ | ✓ | ✓ |
| Klávesnice pro zadávání dat | × | × | × | ✓ |
| Databáze ropných burz | × | × | ✓ | ✓ |
| Aktualizace systému | × | × | Aktualizace USB | Aktualizace USB |
| Nastavení jazyka | × | Čínština, angličtina, španělština, francouzština, němčina, ruština, portugalština, vietnamština, malajština | Čínština, angličtina, španělština, francouzština, němčina, ruština, portugalština, vietnamština, malajština | Čínština, angličtina, španělština, francouzština, němčina, ruština, portugalština, vietnamština, malajština |
Manuál a podpora
Najděte manuál a pokyny k montáži
AUTOOL Uživatelská příručka ATF705
Otevřete si manuál ve formátu PDF pro AUTOOL ATF705 equal-volume ATF exchange, flow-direction detection, circulation and tank draining, connector selection, fluid compatibility, safety and troubleshooting support.
obsah balení
Podívejte se, co je v krabici
- Hlavní jednotkaAUTOOL ATF705 automatic transmission fluid exchanger
- Connector ToolboxSpecialized connectors and service accessories
- Uživatelský manuálAUTOOL Uživatelská příručka ATF705
- Check Fitment Before OrderingConfirm connector compatibility with your vehicle if you are unsure
Dotazy kupujících
Otázky ohledně nastavení, montáže a servisu automatické převodovky (ATF)
What Is the Main Difference Between ATF705 and ATF702?
ATF702 uses mechanical control, 12 V DC power, no screen, and manual circulating flushing and ATF exchange. ATF705 adds electronic control and 110/220 V AC power, plus a 5-inch IPS screen. It also adds automatic flow-direction detection, automatic equal-volume exchange, buzzer alerts, and backlit exchange and fluid-level windows.
Does ATF705 Support Automatic Equal-Volume ATF Exchange?
Yes. ATF705 performs automatic equal-volume ATF exchange with an exchange error of less than 0.2 kg. This helps keep used ATF output and new ATF input balanced during service.
Which Voltage Version Should I Order?
ATF705 is available in 110 V and 220 V AC versions. Confirm the correct version for your region before ordering, then follow the unit label and user manual when connecting power.
Can ATF705 Be Used on Gasoline and Diesel Vehicles?
Yes. Use ATF705 to service automatic transmissions in gasoline and diesel vehicles. Its specialized connectors support many transmissions used in European, American, Japanese, Korean, and Chinese vehicles. Confirm connector compatibility if you are unsure.
How Long Does the ATF Exchange Take?
With the correct setup and service procedure, a typical ATF exchange takes about 20 minutes. Under those conditions, the ATF exchange rate is over 90%. If the vehicle-specific procedure requires extended circulating flushing, run it for more than 20 minutes.
What Should I Check Before Starting Operation?
Before starting, confirm the correct voltage version, ATF type, vehicle stability, wheel chocks, and connector fitment. Check that all hoses and transmission fluid line connections are secure and leak-free. Do not start operation if the vehicle is unstable, a connection leaks, or the power supply does not match the unit.
What Is Included in the ATF705 Package?
The package includes the ATF705 main unit, connector toolbox, and user manual. The exact connector set may vary with the package configuration you order. Check your order details or contact support if you need to confirm a specific connector.
What Warranty and Support Does ATF705 Include?
Hlavní jednotka: 3letá záruka. Standardní příslušenství: 1letá záruka. Záruční podmínky.
Hodnocení zákazníků
Nechte recenzi
Nigel Smith ✓ Ověřený nákup -
Using this transmission fluid changer has made operation so much easier.
Using this transmission fluid changer has made operation so much easier. No lines need to be disconnected; it’s almost fully automatic, saving a lot of effort. The fluid level is very accurate, and it’s noticeably cleaner than a manual change.
Neil Porter ✓ Ověřený nákup -
What stands out most is its efficiency — the ATF705 can complete cleaning and…
What stands out most is its efficiency — the ATF705 can complete cleaning and fluid replacement for the transmission, torque converter, and transmission cooler in as little as 20 minutes. With an oil replacement rate exceeding 90%, it ensures a far more thorough fluid change compared to traditional manual methods.
The intelligent system automatically identifies oil inlet and outlet directions, and its program-controlled equal exchange function keeps fluid levels balanced during operation. This not only prevents potential transmission damage but also guarantees consistent, reliable results.
Jerome Henrietta ✓ Ověřený nákup -
I received my transmission oil change kit very quickly, and it looks like it's…
I received my transmission oil change kit very quickly, and it looks like it’s of good quality. With this kit, changing transmission oil will be faster and more convenient. I am very satisfied with AUTOOL’s service and will purchase again!