AUTOOL HTS518 Car Engine Carbon Deposition Cleaner Intake Pipe Valve Cleaning Machine Decarbonizing Auto Decarbon Wash

(44 customer reviews)

US$539.00

Secure checkoutFast supportBulk ready
AUTOOL HTS518

Product Overview

The AUTOOL HTS518 is a 1400W walnut shell blasting machine for removing stubborn carbon deposits from the intake pipe and the backside of intake valves. It combines walnut abrasive blasting, vacuum recovery, dust filtering, 23 intake adapters, a 30L tank, and a trolley-style body to help workshops clean carbon buildup more efficiently.

1400W Power 30L Capacity 23 Adapters External Air Required
0.6-1.2mmWalnut Abrasive
2-4kgSuggested Fill
1-3 minPer Cleaning
3 YearsWarranty Support
AUTOOL HTS518 walnut sand de-carbon cleaner main product image with EU and US plug options Click to enlarge
Before You Order And Use

Before You Order And Use

Confirm the abrasive, air compressor, cleaning range, intake valve position, and reuse rules before ordering or operating the walnut blaster.

External Air Compressor Required

HTS518 needs an external high-pressure air compressor for blasting. The air compressor is not included in the package.

Use Dry Filtered Air

Use an air compressor with stable pressure and a dryer filter when possible. Moisture may cause walnut shell media to clump and reduce blasting performance.

6 Bar Or Above Recommended

The original air compressor configuration calls for up to 0.7MPa and generally 6 bar or more. Always follow safe workshop and vehicle service limits.

Walnut Sand Not Included

Walnut shell abrasive is not included. Prepare 0.6-1.2mm walnut abrasive before use, or purchase compatible walnut sand separately.

Intake System Only

HTS518 is designed for the engine intake pipe and intake valve backside. It is not for injector, throttle valve, cylinder, or combustion chamber cleaning.

Clean Port By Port

Close the intake valve before blasting. Clean one intake port each time; a 6-cylinder engine should be cleaned six times, one port at a time.

Safety And Media Reminders

  • High-precision intake systems, such as BMW Valvetronic systems, are sensitive to foreign matter. Make sure the intake valve is closed and visible media is recovered before restarting the engine.
  • Walnut powder is a natural polishing material with hardness lower than metal but higher than carbon deposits, helping remove buildup without damaging the metal surface when used correctly.
  • Small residual walnut powder may burn to ash after the engine starts, but visible media should still be recovered and the intake should be checked before startup.
  • Chemical cleaning agents may corrode pipes or shorten service life if used improperly; walnut blasting avoids soaking the intake with chemical fluid.
Key Features

Key Features

HTS518 focuses on intake carbon removal, simultaneous spraying and recovery, reusable walnut abrasive separation, adapter coverage, and workshop mobility.

1400W Strong Suction

The 1400W motor provides strong vacuum recovery while the external air source delivers blasting force for carbon deposit removal.

Deep Intake Carbon Removal

Helps remove sticky carbon deposits from the intake manifold area and intake valve backside, supporting better airflow and smoother engine operation.

Spray And Recovery Together

The integrated design allows walnut grit to be sprayed and recovered simultaneously, reducing scattered media during the cleaning process.

Built-In Dust Filter

The internal filter separates recovered walnut sand grit from carbon deposits so the abrasive can be reused when the condition allows.

23 Intake Adapters

The 23-adapter set improves fitment coverage for many intake port shapes, including common applications for BMW, Volkswagen, Mercedes-Benz, GM, Volvo, Nissan, Toyota, Honda, Audi, and more.

Workshop-Friendly Body

A rear storage box, three-section telescoping handle, and 360° swivel casters make it easier to store adapters and move the unit around the service area.

How It Works

How It Works

HTS518 uses a closed-loop walnut shell blasting process: abrasive impact loosens carbon deposits, while vacuum recovery collects media and residue for filtering.

Close The Intake Valve

Before blasting, turn the crankshaft to close the intake valve for the port being cleaned. This helps keep media out of the combustion area.

Spray Walnut Abrasive

The external air compressor drives walnut powder through the blasting gun into the intake port, where repeated impact breaks down hard carbon deposits.

Recover Through Vacuum

The recovery hose collects walnut powder and removed carbon residue during cleaning, helping keep the process controlled and cleaner.

Separate And Reuse

The built-in filter separates carbon residue from walnut abrasive. Under normal conditions, the abrasive can usually be reused 5-10 times.

Compatibility And Fitment

Compatibility And Fitment

Use the correct walnut shell abrasive size and confirm the cleaning target before service. HTS518 is for intake pipe and intake valve backside carbon cleaning only.

0.6-1.2mm Walnut Sand

Use walnut shell abrasive between 0.6-1.2mm. Walnut sand is made from crushed walnut shells and screened by particle size.

Natural Abrasive Material

Walnut sand has strong wear resistance, pressure resistance, and a microporous surface. It provides good adsorption while avoiding corrosion or pollution when used correctly.

Reusable 5-10 Times

The abrasive can usually be reused 5-10 times under normal conditions. Replace it earlier if it is wet, clumped, contaminated, or no longer cleans effectively.

Broad Adapter Coverage

The 23-adapter kit is designed for many intake port shapes and helps support common vehicle brands and engine layouts.

Not For Injectors

Do not use HTS518 to clean fuel injectors. Choose an AUTOOL fuel injector cleaner if injector cleaning is required.

Not For Combustion Chambers

HTS518 does not support engine combustion chamber cleaning. For that requirement, compare the HTS728 model instead.

How To Use

How To Use

Follow the basic operating sequence below, then verify the intake port is clean and media is recovered before moving to the next cylinder.

Add Walnut Powder

Open the head cover, pour in 2-4kg of 0.6-1.2mm walnut powder, press the dust guard firmly onto the walnut powder, and close the cover securely.

Connect Gun And Recovery Hose

Join the spray gun muzzle and the recovery hose together. The recovery hose has an opening designed for the blasting nozzle and vacuum path.

Prepare The Intake Port

Remove the intake manifold, insert the spray gun into the intake port, and turn the crankshaft to close the intake valve for the port being cleaned.

Connect Air And Power

Connect the external high-pressure air compressor to HTS518, then connect AC power. The air compressor is required and is not included.

Clean And Inspect

Start cleaning for about 1-3 minutes depending on carbon buildup. Stop the machine, inspect the result, recover remaining media, and repeat for the next intake port if needed.

Use Notes

  • Do not start blasting until the target intake valve is closed.
  • Clean one intake pipe or intake port each time.
  • The cleaning process normally lasts 1-3 minutes, depending on the carbon deposition condition.
  • Walnut powder can usually be reused 5-10 times, depending on contamination and moisture.
  • Use a dryer filter on the air compressor to prevent walnut sand from clumping.
  • Check for visible walnut media before starting the engine after cleaning.
Specifications

AUTOOL HTS518 Product Specifications

HTS518 is a 30L, 1400W walnut shell blasting machine with vacuum recovery, 23 adapters, storage box, 360° casters, and a three-section telescoping handle.

Core Specifications
ProductAUTOOL HTS518 Walnut Sand De-Carbon Cleaner
Working PrincipleWalnut shell blasting with vacuum recovery
ApplicationsIntake pipe and intake valve backside carbon cleaning
Input Voltage110V / 220V
Rated Frequency50 / 60Hz
Rated Power1400W
Vacuum Suction0.02MPa
Air Flow<300L/min (<0.3 m³/min)
Main Unit Capacity30L
Product Weight23.5kg
Package Dimensions520 × 520 × 890mm
Media And Compressor
Walnut Shell Abrasive Size0.6-1.2mm
Suggested Fill Amount2-4kg walnut powder
Abrasive ReuseUsually 5-10 times under normal conditions
External Air CompressorRequired; not included
Recommended Air SetupDry-filtered air, generally 6 bar or above
Design And Functions
Configured Connectors23 types
Storage BoxYes
Pressure GaugeNo
Pressure SettingsNo pressure regulation knob
Mode SwitchHigh / Low Mode and Low-Speed Mode
Built-In Dust FilterYes
HEPA FilterNo
Engine Combustion Chamber CleaningNo
360° Swivel CasterYes
Three-Section Telescoping HandleYes
AUTOOL HTS518 specifications and product structure diagram Click to enlarge
Core Specifications
ProductAUTOOL HTS518 Walnut Sand De-Carbon Cleaner
Working PrincipleWalnut shell blasting with vacuum recovery
ApplicationsIntake pipe and intake valve backside carbon cleaning
Input Voltage110V / 220V
Rated Frequency50 / 60Hz
Rated Power1400W
Vacuum Suction0.02MPa
Air Flow<300L/min (<0.3 m³/min)
Main Unit Capacity30L
Product Weight23.5kg
Package Dimensions520 × 520 × 890mm
Media And Compressor
Walnut Shell Abrasive Size0.6-1.2mm
Suggested Fill Amount2-4kg walnut powder
Abrasive ReuseUsually 5-10 times under normal conditions
External Air CompressorRequired; not included
Recommended Air SetupDry-filtered air, generally 6 bar or above
Design And Functions
Configured Connectors23 types
Storage BoxYes
Pressure GaugeNo
Pressure SettingsNo pressure regulation knob
Mode SwitchHigh / Low Mode and Low-Speed Mode
Built-In Dust FilterYes
HEPA FilterNo
Engine Combustion Chamber CleaningNo
360° Swivel CasterYes
Three-Section Telescoping HandleYes
AUTOOL HTS518 packing list with main unit adapters goggles sandblasting gun black pipe adapters and recovery hose Click to enlarge
What Is In The Box

What Is In The Box

The package includes the HTS518 main unit and accessories shown in the packing list image. Walnut sand and the external air compressor are not included.

Main UnitAUTOOL HTS518 walnut sand de-carbon cleaner
Adapters23 intake adapters shown in the packing list image
ProtectionProtective goggles shown in the package image
Cleaning ToolsSandblasting gun and black pipe adapters shown in the package image
Recovery HoseFlexible recovery hose shown in the package image
Not IncludedWalnut sand and high-pressure air compressor
Product Comparison

Product Comparison

Compare HTS518 with HTS558, HTS559, HTS678, and HTS728 before choosing the right walnut blasting machine for your workshop.

HTS518 Focus1400W, 30L capacity, 23 adapters, storage box, built-in dust filter, 360° caster, three-section telescoping handle, High/Low Mode, and Low-Speed Mode.
HTS558Basic model with 1200W power, 13L capacity, 5 connector types, built-in dust filter, and 360° caster.
HTS559Upgraded from HTS558 with 1400W power and 30L capacity, but still uses 5 connector types and has no storage box or mode switch.
HTS6781500W workshop model with 10L capacity, pressure gauge, pressure regulation knob, standard/expert mode, HEPA filter, storage box, and telescoping handle.
HTS728Expert-grade model using finer 0.4-0.6mm abrasive. It supports engine combustion chamber cleaning, pressure gauge, pressure regulation, HEPA filter, recovery mode, and filling mode.
Decision CheckChoose HTS518 if you need a 30L intake walnut blaster with 23 adapters and mode switching. Choose HTS728 if combustion chamber cleaning is required.
Comparison chart of AUTOOL HTS558 HTS559 HTS518 HTS678 and HTS728 engine carbon cleaning machines Click to enlarge
Related Products

Related Products

Compare related AUTOOL walnut shell blasting machines and compatible walnut sand before ordering. The walnut sand accessory is included here because HTS518 requires abrasive media for use.

Manual And Downloads

Manual And Downloads

Download the HTS518 manual for setup, walnut abrasive preparation, air compressor connection, operation, and safe-use instructions.

AUTOOL HTS518 walnut sand de-carbon cleaner user manual preview Click to enlarge

AUTOOL HTS518 Manual PDF

Open the PDF manual for product structure, setup guidance, operating steps, and maintenance notes.

Download Manual

Need Setup Confirmation?

Contact AUTOOL Store before ordering if you need to confirm air compressor requirements, walnut abrasive size, adapter compatibility, HTS518 versus HTS728 selection, or package contents.

Questions And Answers

These answers cover walnut sand, carbon deposition, cleaning range, air compressor setup, abrasive reuse, model selection, package contents, and support.

Related Guides

Related Guides

Read more about walnut shell carbon removal, walnut blasting versus dry ice blasting, and alternative engine cleaning methods.

AUTOOL dry ice blasting cleaner series guide image
Guide / 07-18-2025

Why Is Dry Ice Blasting So Expensive?

More and more car enthusiasts and professionals are choosing dry ice blasting technology as an efficient and eco-friendly vehicle maintenance method. However, many are.

Warranty And Contact

Warranty And Contact

For HTS518 model selection, walnut sand purchase, compressor setup, adapter confirmation, operation questions, package confirmation, or warranty support, contact AUTOOL Store directly.

Pre-Sales And Product Support

Use support if you need help confirming whether HTS518 fits your intake cleaning requirement, whether HTS728 is better for combustion chamber cleaning, what walnut abrasive to buy, or how to connect the external air compressor.

  • 3-year warranty support for eligible non-human damage cases
  • Walnut abrasive size and purchase guidance
  • External air compressor and dryer filter confirmation
  • Adapter and vehicle intake compatibility confirmation
  • HTS558 / HTS559 / HTS518 / HTS678 / HTS728 model selection
  • Setup, operation, package, and accessory troubleshooting

Customer Reviews

  1. 5
    (44 customer reviews)
    100% of customers recommend this product.
    5 Stars100%4 Stars0%3 Stars0%2 Stars0%1 Star0%
  2. Stanton Leuschke

    good

    0 of 0 found this review helpful
  3. Ray

    I recommend AUTOOL

    0 of 0 found this review helpful
  4. Edna Thompson

    like it very much

    0 of 0 found this review helpful
  5. Paige Fritsch

    very good

    0 of 0 found this review helpful
  6. Lazaro Graham

    The package is complete

    0 of 0 found this review helpful
  7. Brando Goyette

    Like it very much

    0 of 0 found this review helpful
  8. Haleigh Deckow

    a wonderful device

    0 of 0 found this review helpful
  9. Lazaro Graham

    looks good

    0 of 0 found this review helpful
  10. Paige Fritsch

    Received the goods, thanks

    0 of 0 found this review helpful
  11. Brando Goyette

    Everything is fine

    0 of 0 found this review helpful
  12. Bethany Roberts

    Fast delivery.

    0 of 0 found this review helpful
  13. Nedra Pagac

    useful

    0 of 0 found this review helpful
  14. Pansy Jaskolski

    Perfect

    0 of 0 found this review helpful
  15. Grace Hodkiewicz

    thanks

    0 of 0 found this review helpful
  16. Diego Dickens

    It’s fine

    0 of 0 found this review helpful
  17. Ralph Kris

    super fast

    0 of 0 found this review helpful
  18. Taryn Schowalter

    Looking all good

    0 of 0 found this review helpful
  19. Tremayne Bradtke

    Works very well

    0 of 0 found this review helpful
  20. Yadira Moore

    Very satisfied

    0 of 0 found this review helpful
  21. Pansy Jaskolski

    work good

    0 of 0 found this review helpful
  22. Johnson

    Came without damage

    0 of 0 found this review helpful
  23. Angus Carter

    Received Ok

    0 of 0 found this review helpful
  24. Sheridan Ebert

    Good packing

    0 of 0 found this review helpful
  25. Thibault

    I have cleaned the engines of 10 cars with it and it works great. Just need to buy your own walnut grit

    0 of 0 found this review helpful
  26. Rudan

    I received my item in 3 days with fast shipping! The quality is very good! Free walnut sand too!

    0 of 0 found this review helpful
  27. Hampl Csaba (verified owner)

    AUTOOL HTS518 Car Engine Carbon Deposition Cleaner Intake Pipe Valve Cleaning Machine Decarbonizing Auto Decarbon Wash

    0 of 0 found this review helpful
  28. Vijay Ssingh

    Used this walnut blaster on my 2017 Chevy Silverado valves and it did an excellent job. Took me about 10 mins per valve.

    0 of 0 found this review helpful
  29. Bal¨¢zs Balogh

    Nagyon j¨®! Eddig t?k¨¦letesen m?k?dik! J¨® v¨¦tel volt. Perfect work!

    0 of 0 found this review helpful
  30. Bal¨¢zs Balogh

    Nagyon j¨®! Eddig t?k¨¦letesen m?k?dik! J¨® v¨¦tel volt. Perfect work!

    0 of 0 found this review helpful
  31. Asyraaf

    I would thanks to Daisy because guide me patiently to make payment.. Very helpful staff

    0 of 0 found this review helpful
  32. Kir¨¢ly L¨¢szl¨® (verified owner)

    The machine is not arriwed jet. Only the walnut.
    I am waiting.

    Thanks

    0 of 0 found this review helpful
  33. Hyman Longman

    If you are a personal user, then this unit is perfect for your daily engine carbon cleaning. The cleaning efficiency is very high and I am a personal user myself and I am very satisfied!

    0 of 0 found this review helpful
  34. cth

    It cleans up nicely and the walnut sand is recycled! Awesome!

    0 of 0 found this review helpful
  35. Kitty

    It’s so clean.

    0 of 0 found this review helpful
  36. john valadao

    It doesn’t get any better than this.

    0 of 0 found this review helpful
  37. Weisz Vilmos (verified owner)

    Good team!
    Excellent customer service, quick response.

    0 of 0 found this review helpful
  38. Dass

    It cleans very well and is exceptionally easy to operate!

    0 of 0 found this review helpful
  39. Whinky

    Great product! I love it so much. The fact that you can recycle the walnut sand when you run out is fantastic!

    0 of 0 found this review helpful
  40. Baron Wild

    To everyone reading this, STOP! Wasting money on sea foam or other products that you think it will take out the carbon buildup Because it will not! Buy this amazing walnut sandblasting tool and clean that carbon the right way. I did it and so can you. You won¡¯t regret it trust me. God bless everyone.

    0 of 0 found this review helpful
  41. Baron Wild

    To everyone reading this, STOP! Wasting money on sea foam or other products that you think it will take out the carbon buildup Because it will not! Buy this amazing walnut sandblasting tool and clean that carbon the right way. I did it and so can you. You won¡¯t regret it trust me. God bless everyone.

    0 of 0 found this review helpful
  42. Mike

    Cleans well and recycles the walnut sand

    0 of 0 found this review helpful
  43. Prima Defoe

    A++, Packaging and Shipping was great, Walnut blaster as described, Quality great, Value was fine, Condition was perfect right out of the box, Appearance was as described. Sorry for not getting this review done earlier for you. Thanks for sending Email. Great doing business with you, Thanks Again, A++

    0 of 0 found this review helpful
  44. Tuukka

    The AUTOOL HTS518 walnut blaster is a reliable shop tool! The 1400W motor and external air source blast away tough carbon deposits on valves and manifolds, fixing rough idling easily. The 23 adapters fit all my common models—BMW, VW, Mercedes—and the integrated spray/recovery with filter lets me reuse walnut sand. The swivel casters and adapter storage make it super easy to use daily. Worth every penny!

    0 of 0 found this review helpful
  45. Tom

    I’ve been using the AUTOOL HTS518 walnut blaster and it’s extremely effective at cleaning engine carbon deposits. It fixed my unstable idle and high fuel consumption issues. The 1400W motor offers strong suction and the reusable walnut abrasive helps save cost. Great machine that restores engine performance perfectly!

    0 of 0 found this review helpful
Leave A Review

Your email address will not be published. Required fields are marked *

AUTOOL HTS518 Car Engine Carbon Deposition Cleaner Intake Pipe Valve Cleaning Machine Decarbonizing Auto Decarbon Wash
AUTOOL HTS518 Car Engine Carbon Deposition Cleaner Intake Pipe Valve Cleaning Machine Decarbonizing Auto Decarbon Wash

US$539.00

Select options This product has multiple variants. The options may be chosen on the product page