語言和貨幣
AUTOOL HTS518 核桃噴砂機
US$539.00
主要特色
- Compressor-Driven Blast + Recovery
- 23 進氣轉接器
- Built-In Media Filtration
- Mobile 30 L Layout
- Compressor-Driven Blast + Recovery: Walnut-blast and recover accessible intake-port and valve-back deposits with the 1400 W integrated vacuum; an external compressor is not included.
- 23 進氣轉接器： Use 23 intake adapters to match varied intake-port shapes.
- Built-In Media Filtration: The filter separates recovered walnut abrasive from carbon residue.
- Mobile 30 L Layout: A 30 L body, rear storage, telescoping handle, and swivel casters organize the setup for workshop movement.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL HTS518 · Walnut Blaster with Integrated Recovery
Blast and Recover Intake Carbon in One Workflow
Remove accessible intake-port and valve-back deposits with compressor-driven walnut blasting and integrated vacuum recovery. The 30 L mobile body combines a 1400 W recovery system, dust filtration and 23 intake adapters for varied port shapes, with rear storage to keep accessories together. Use dry 0.6–1.2 mm walnut media and a suitable external compressor, both supplied separately, with an engine-matched adapter and seal.
- 23 進氣轉接器
- 30升恢復體
- 1400瓦真空恢復
- Integrated Dust Filtration
- Built-In Accessory Storage
主要特色
Control Walnut Media While Cleaning Intake Ports and Valve Backs
Intake Carbon Cleaning with Recovery
External air drives walnut abrasive while the integrated vacuum path collects loosened deposits and media.
二十三款進氣轉接器
Choose from 23 intake-adapter profiles to match varied port shapes, then verify the fit and seal for the exact engine.
Built-In Dust Filtration and Media Reuse
The filter helps separate recovered walnut abrasive from carbon residue. HTS518 product guidance gives 5–10 uses as a reference under normal conditions; reuse only when the media stays dry, unclumped and uncontaminated, cleaning performance remains suitable, and the vehicle procedure permits it.
High/Low and Low-Speed Modes
Selectable modes support the model’s cleaning workflow when used according to the HTS518 manual.
Mobile Storage Layout
A rear storage box, telescoping handle and 360° casters keep adapters with the unit and ease workshop movement.
1400 W Recovery System
The rated machine power supports vacuum recovery; blasting pressure and airflow come from an external compressor.
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
如何使用
Seal, Blast, Recover, and Verify
步驟進展1 / 7
01
Load Compatible Media
Add the manual-specified amount of dry 0.6–1.2 mm walnut-shell blasting media, generally about 2–4 kg.
02
連接槍和回收軟管
Secure the walnut blasting gun and keep its nozzle within the recovery path.
03
Prepare the Intake Port
Access the target port, close the target intake valve and isolate other openings under the vehicle procedure.
04
Connect Dry External Air and Power
Use a suitable dry, filtered compressor and the correct grounded power version; the compressor is not included.
05
爆炸與恢復
Clean one port at a time, using the appropriate mode and inspecting progress. The blasting step takes approximately 1–3 minutes per intake port, depending on the amount of carbon buildup.
06
Recover and Inspect
Use the integrated recovery system to vacuum remaining walnut abrasive, then inspect with adequate lighting or a borescope until no visible media remains.
07
Reassemble and Verify
Reinstall intake components, complete leak checks and diagnostic/functional checks required by the vehicle procedure.
安全性和相容性
Prepare the Air, Media, Port, and Valve
External Compressor and Air Supply
HTS518 requires an external high-pressure air compressor, which is not included. Use stable, dry, filtered air at up to 0.7 MPa; 6 bar or more is generally recommended for operation. Also confirm sufficient continuous airflow and suitable tank, hose, quick-connect fittings, and pressure settings for the workshop setup.
Valve Closure and Isolation
Never blast a port until its intake valve is fully closed and unintended openings are isolated.
Adapter Fit
The 23 adapters are not universal; confirm the engine, port geometry and seal.
Compatible Media and PPE
Use compatible dry 0.6–1.2 mm walnut-shell abrasive and add about 2–4 kg. Walnut abrasive is not included. Use suitable eye and respiratory protection, good ventilation, and the media supplier Safety Data Sheet; walnut-shell dust may present allergen concerns.
Residual-Media Check
Do not rely on the engine to consume residual media; recover and inspect before startup.
Intake Cleaning Scope
HTS518 is designed for carbon cleaning in the intake pipe and on the backs of intake valves. It is not designed for fuel injectors, throttle valves, cylinders, or combustion chambers.
比較型號
選擇核桃噴砂系統
模型指南
選擇一個或多個型號。預設選擇 HTS518。
已選擇 1 個模型
未選擇任何型號。請選擇一個型號進行比較。
| 產品名稱 | 高溫超導558 | 高溫超導559 | 高溫超導518 | 高溫超導678 | 高溫超導728 |
|---|---|---|---|---|---|
| 清潔方法及適用性 | |||||
| 工作原理 | 核桃殼爆破 | 核桃殼爆破 | 核桃殼爆破 | 核桃殼爆破 | 核桃殼爆破 |
| 核桃殼磨料 | 0.6〜1.2mm | 0.6〜1.2mm | 0.6〜1.2mm | 0.6〜1.2mm | 0.4〜0.6mm |
| 引擎燃燒室清潔 | × | × | × | × | ✓ |
| 電源和空氣需求 | |||||
| 輸入電壓 | 區域電壓版本為 110V 或 220V；請確認銘牌。 | 區域電壓版本為 110V 或 220V；請確認銘牌。 | 區域電壓版本為 110V 或 220V；請確認銘牌。 | 區域電壓版本為 110V 或 220V；請確認銘牌。 | 區域電壓版本為 110V 或 220V；請確認銘牌。 |
| 額定頻率 | 50 / 60HZ | 50 / 60HZ | 50 / 60HZ | 50 / 60HZ | 50 / 60HZ |
| 額定功率 | 1200W | 1400W | 1400W | 1500W | 1400W |
| 真空吸附 | 0.02MPa | 0.02MPa | 0.02MPa | 0.02MPa | 沒有說明 |
| 外部空氣供應 | 沒有說明 | 沒有說明 | 沒有說明 | 沒有說明 | > 0.7兆帕 |
| 氣流 | <300公升/分鐘 （<0.3 立方公尺/分鐘） | <300公升/分鐘 （<0.3 立方公尺/分鐘） | <300公升/分鐘 （<0.3 立方公尺/分鐘） | <300公升/分鐘 （<0.3 立方公尺/分鐘） | > 400L / min （>0.4立方米/分鐘） |
| 外置空氣壓縮機 | ✓ | ✓ | 必填（不包括） | ✓ | ✓ |
| 容量、配置和行動性 | |||||
| 主機容量 | 13L | 30L | 30L | 10L | 10L |
| 產品重量 | 10kg | 12kg | 23.5kg | 52kg | 50kg |
| 已配置連接器 | 5類型 | 5類型 | 23類型 | 23類型 | 5類型 |
| 儲物盒 | × | × | ✓ | ✓ | × |
| 360°旋轉腳輪 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 三節伸縮手把設計 | × | × | ✓ | ✓ | × |
| 控制與過濾 | |||||
| 壓力計 | × | × | × | ✓ | ✓ |
| 壓力設置 | × | × | × | 壓力調節旋鈕 | 壓力調節旋鈕 |
| 模式切換 | × | × | 高/低模式 低速模式 | 標準模式 專業級 | 恢復模式 填充模式 |
| 內建除塵過濾器 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 高效能空氣微粒過濾器（HEPA過濾器） | × | × | × | ✓ | ✓ |
使用者手冊及下載
Walnut Blasting Manual and Setup Support
AUTOOL HTS518 使用手冊
Open the PDF manual for HTS518 walnut blasting, intake-adapter selection, media recovery, compressor setup, cleaning preparation, operating safety, maintenance, and troubleshooting.
小包裝
What’s Included with the HTS518 Walnut Blaster
- HTS518 主機Walnut shell blasting machine with integrated recovery.
- 23 進氣轉接器Adapter set for varied intake-port shapes.
- 爆破和回收部件Walnut blasting gun, black pipe adapters and flexible recovery hose.
- 防護鏡Included eye protection.
- Required but Not Included核桃砂和外置高壓空氣壓縮機。
常見問題
Walnut Blasting Setup Questions
How does HTS518 use walnut blasting to clean intake valves?
HTS518 uses walnut blasting on the backs of intake valves and intake-port surfaces to loosen hard carbon deposits, while vacuum recovery collects spent media and carbon residue. Cleaning should follow the service procedure for the specific vehicle.
Are the 23 adapters universal?
No. Match the adapter to the exact engine and port and confirm a secure seal.
What walnut abrasive size should I use?
Use 0.6–1.2 mm walnut-shell abrasive for HTS518 and add about 2–4 kg. Keep the media dry and free of clumps.
What air compressor does HTS518 need?
HTS518 requires an external high-pressure air compressor, which is not included. Use stable, dry, filtered air at up to 0.7 MPa; 6 bar or more is generally recommended for operation. Make sure the compressor provides sufficient continuous airflow and that the hose, quick-connect fittings, and pressure settings suit the workshop setup.
Can walnut abrasive be reused?
Yes, when the vehicle procedure permits it and the recovered media remains suitable. HTS518 product guidance gives 5–10 uses as a reference under normal conditions, but actual reuse depends on dryness, clumping, contamination, cleaning performance, and the vehicle procedure; some jobs require fresh abrasive.
Does cleaning guarantee better power or fuel economy?
No. The machine removes accessible deposits; vehicle response depends on diagnosis, condition and other repairs.
What is walnut sand?
Walnut abrasive, often called walnut sand, is made from crushed walnut shells screened and classified by size. For HTS518, use compatible 0.6–1.2 mm walnut abrasive. Walnut-shell media can create dust and may present allergen concerns. Follow the media Safety Data Sheet and use appropriate PPE.
Is walnut abrasive included in the package?
No. Walnut abrasive is not included; prepare compatible 0.6–1.2 mm media separately before using HTS518.
Can HTS518 clean injectors, throttle valves, cylinders, or combustion chambers?
No. HTS518 is designed to clean the intake pipe and the backs of intake valves, not injectors, throttle valves, cylinders, or combustion chambers. Use a dedicated injector-cleaning tool for injectors.
When should intake carbon deposits be cleaned?
Clean intake-valve and intake-port deposits when inspection or diagnosis shows significant buildup and the vehicle service procedure supports mechanical cleaning. Do not use one fixed mileage interval for all vehicles, and do not expect a guaranteed improvement in power, fuel economy, or drivability.
How long does cleaning take?
The blasting step takes approximately 1–3 minutes per intake port, depending on the amount of carbon buildup. Total service time also includes access and disassembly, valve-position confirmation, adapter setup, cleanup, residual-media inspection, reassembly, leak checks, diagnostic scanning, and a functional vehicle check.
Where can I compare HTS558, HTS559, HTS518, HTS678, and HTS728?
Use the walnut blaster comparison table above to compare rated power, capacity, adapters, filters, modes, pressure controls, and combustion-chamber capability across the five models.
What should I check before starting the engine after cleaning?
Confirm that the target intake valve was closed during blasting, vacuum out remaining abrasive, inspect the port with adequate lighting or a borescope, remove tools and adapters, reinstall components, then complete leak checks, a diagnostic scan, and a final functional check.
包括哪些配件？
The package includes the HTS518 main unit, 23 intake adapters, protective goggles, blasting gun, black pipe adapters, and recovery hose. Walnut abrasive and the external high-pressure air compressor are not included. See the package image for a visual reference.
保修多長時間？
主機：三年保固。標準配件：一年保固。保固政策。
客戶評價
留言
Tom ✓ 已驗證購買–
我一直在使用 AUTOOL HTS518 walnut blaster and it’s extremely effective at…
我一直在使用 AUTOOL HTS518 walnut blaster and it’s extremely effective at cleaning engine carbon deposits. It fixed my unstable idle and high fuel consumption issues. The 1400W motor offers strong suction and the reusable walnut abrasive helps save cost. Great machine that restores engine performance perfectly!
圖卡 ✓ 已驗證購買 -
这 AUTOOL HTS518 walnut blaster is a reliable shop tool!
这 AUTOOL HTS518 walnut blaster is a reliable shop tool! The 1400W motor and external air source blast away tough carbon deposits on valves and manifolds, fixing rough idling easily. The 23 adapters fit all my common models—BMW, VW, Mercedes—and the integrated spray/recovery with filter lets me reuse walnut sand. The swivel casters and adapter storage make it super easy to use daily. Worth every penny!
Prima Defoe ✓ 已驗證購買 -
A++, Packaging and Shipping was great, Walnut blaster as described, Quality…
A++, Packaging and Shipping was great, Walnut blaster as described, Quality great, Value was fine, Condition was perfect right out of the box, Appearance was as described. Sorry for not getting this review done earlier for you. Thanks for sending Email. Great doing business with you, Thanks Again, A++