AUTOOL ATL-4.5DA Asymmetric Two-Post Car Lift
Price range: US$3,099.00 through US$3,199.00
- 4,500 kg Asymmetric Layout
- One-Side Synchronous Unlock
- Chain-Free Hydraulic Drive
- Reinforced Carriage + Arms
- 4,500 kg Asymmetric Layout: Use an asymmetric two-post layout rated to 4,500 kg across a 95–1,990 mm lift range, with extra room for vehicle-door opening.
- One-Side Synchronous Unlock: Release both column locks together from one operating side.
- Chain-Free Hydraulic Drive: Lift through a direct-drive hydraulic system without lifting chains.
- Reinforced Carriage + Arms: Support workshop lifting with a reinforced 1.95 m carriage and strengthened second and third arms.
- Adjustable Contact Height: Match vehicle contact height with three-stage screw pads and height sleeves.
- 3,900 mm Height / 3,756 mm Width: Plan around 3,900 mm overall height, 2,900 mm inner width, and 3,756 mm overall width.
- 4,500 kg Asymmetric Layout: Use an asymmetric two-post layout rated to 4,500 kg across a 95–1,990 mm lift range, with extra room for vehicle-door opening.
- One-Side Synchronous Unlock: Release both column locks together from one operating side.
- Chain-Free Hydraulic Drive: Lift through a direct-drive hydraulic system without lifting chains.
- Reinforced Carriage + Arms: Support workshop lifting with a reinforced 1.95 m carriage and strengthened second and third arms.
- Adjustable Contact Height: Match vehicle contact height with three-stage screw pads and height sleeves.
- 3,900 mm Height / 3,756 mm Width: Plan around 3,900 mm overall height, 2,900 mm inner width, and 3,756 mm overall width.
- 3-Year Warranty Main unit 3 years · Accessories 1 year
- 90-Day Returns Eligible returns within 90 days
- Official Store Genuine products · Direct support
AUTOOL ATL-4.5DA · 4,500 kg Asymmetric Two-Post Lift
Open Vehicle Doors with More Bay Clearance
Use the 4,500 kg asymmetric layout for more door-opening room, one-side synchronized unlocking, chain-free direct drive, and adjustable contact height.
- 4,500 kg Rated Capacity
- Asymmetric Two-Post Layout
- 95–1,990 mm Lift Range
- One-Side Electric Unlock
- Adjustable Screw Pads
Key Features
Combine Asymmetric Access with One-Side Unlocking
Reinforced 1.95m Carriage
The 1.95m high-strength carriage is 50% longer and heavier than standard lift carriages, improving lifting stability for professional workshop use.
Direct-Drive Hydraulic System
The direct-drive hydraulic system eliminates chains, reducing risks related to chain breakage, derailment, and long-term chain maintenance.
Hook-Type Safety Lock
The stable hook-type safety lock helps prevent slippage caused by slider wear, improving safety during lifting operations.
One-Side Electric Dual-Lock Release
One-sided operation can synchronously control both side locking columns, reducing workload and helping avoid vehicle tilt caused by unlocking only one side.
Low-Chassis Vehicle Support
The enhanced second and third support arms are 20% stronger than standard lift arms and are designed for sports cars and ultra-low chassis vehicles.
Adjustable Screw Pads
Standard three-stage screw pads and height adjustment sleeves provide flexible contact height adjustment for different vehicle models.
Thickened Steel Structure
Solid steel plates and 16mm thickened steel plates improve load-bearing capacity, rigidity, and long-term durability.
Ratchet And Support Arm Safety
High-precision support arms and tightly fitted safety ratchets help ensure accurate positioning and reliable locking during lifting.
Asymmetric Lift With Synchronized Unlocking
The 4,500kg ATL-4.5DA uses chain-free hydraulic drive, a reinforced carriage, and one-side operation to unlock both columns together.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
How to Use
Position, Raise, Lock and Lower the Vehicle
Qualify the Installation Site
Before vehicle lift installation, confirm the lift drawing, concrete strength and thickness, anchors, ceiling and door clearance, power, air where required, and vehicle approach space.
Inspect Before Use
Check anchors, columns or platforms, arms, pads, hoses, cables, cylinders, locks and synchronization components before loading a vehicle.
Position the Vehicle
Center the vehicle within the model geometry and keep doors, tires and bodywork clear of columns, platforms and moving parts.
Set Approved Pickup Points
Use the vehicle manufacturer’s approved pickup points and match arm, pad, platform and extension placement to the actual wheelbase and load distribution.
Raise and Check Stability
Lift only enough to take the load, stop and verify all contact points and vehicle balance, then continue while watching both sides.
Engage and Verify Locks
Lower onto the mechanical locks and confirm both sides are engaged before anyone enters the work area below the vehicle.
Clear and Lower
Remove tools and people, raise enough to release the locks as designed, lower through the controlled descent and check the lift after the vehicle exits.
Safety & Compatibility
Qualify the Bay Before the First Lift
Stay Within the Rated Configuration
Do not exceed the model’s rated load, and do not assume the capacity alone proves fit for a particular vehicle or load distribution.
Use the Required Foundation
Install and anchor the lift only to the specified concrete foundation and layout; obtain the model installation drawing before site work.
Use Approved Vehicle Pickup Points
Match arms, pads or platforms to the vehicle manufacturer’s lift points and keep the vehicle balanced.
Keep Clear of Moving and Pinch Zones
Keep people, tools, hoses and body parts away from lifting arms, contact pads, locks, cables and other moving parts during movement.
Verify Locks Before Working Below
Confirm the mechanical locks are fully and evenly engaged before entering beneath the raised vehicle.
Inspect Hydraulic and Synchronizing Parts
Stop use if hoses, cylinders, cables, chains, seals, anchors or synchronization behavior show damage, leakage or abnormal movement.
Confirm Optional Equipment
Infrared, foot, arm or other optional protection is present only when it is included in the ordered configuration.
Specifications
Lift Height, Lifting Time and Motor-Power Requirements
| Specification | Value |
|---|---|
| Minimum Height | 95 mm |
| Maximum Lift Height | 1990 mm |
| Lifting Time | 50 sec |
| Motor Power | 2.2 kW |
| Rated Capacity | 4,500 kg |
| Total Height | 3,900 mm |
| Inner Column Width | 2,900 mm |
| Overall Width | 3,756 mm |
| Power Configuration | 380 V / 220 V / order-specific options, 2.2 kW. |
Manual & Support
Confirm Installation and Ordered Configuration
AUTOOL ATL-4.5DA Manual & Guides
Visit the manual download center to find ATL-4.5DA guidance for asymmetric positioning, synchronized unlocking and support-arm setup, plus operating safety and troubleshooting support.
Package Contents
Verify the Supplied Lift Package
- Package ConfigurationConfirm the exact included items for the selected order configuration.
- Main And Auxiliary UnitsDimensions: 383 × 44 × 72cm · Weight: 647kg
- Pump StationDimensions: 75 × 23 × 33cm · Weight: 19kg
- Accessories BoxDimensions: 40 × 40 × 25cm · Weight: 14kg
FAQs
Vehicle, Bay and Installation Questions
What Is The Lifting Capacity Of ATL-4.5DA?
The AUTOOL ATL-4.5DA rated lifting capacity is 4500kg.
What Is The Maximum Lifting Height?
The maximum lifting height is 1990mm, with a minimum height of 95mm.
What Is The Total Height And Width?
The total height is 3900mm, the inner column width is 2900mm, and the total width is 3756mm.
What Power Supply Does It Use?
The listed power configurations include 380 V, 220 V and order-specific options with a 2.2 kW motor. Confirm the required voltage, phase and local electrical installation before ordering.
What Is The Advantage Of The Asymmetric Structure?
The asymmetric structure provides a larger door-opening angle, smaller footprint, and more convenient vehicle entry and exit, making it suitable for busy repair shops and workshops.
Does ATL-4.5DA Use Chains?
No. The direct-drive hydraulic system eliminates chains, reducing chain breakage or derailment risks.
Is It Suitable For Low-Chassis Vehicles?
Yes. The second and third support arms are designed with 20% higher strength than standard lift arms and are suitable for sports cars with ultra-low chassis designs.
What Is Included In The Packing Information?
The package information includes main and auxiliary units, pump station, and accessories box. Main and auxiliary units are 383 × 44 × 72cm / 647kg; pump station is 75 × 23 × 33cm / 19kg; accessories box is 40 × 40 × 25cm / 14kg.
Should Installation Be Done By Professionals?
Yes. A two post vehicle lift should be installed by qualified personnel on a suitable level concrete foundation. Confirm workshop height, floor space, foundation, voltage, and installation requirements before ordering.
No reviews yetBe the first to share your experience with this product.