AUTOOLautoolstore.com
Fuente: https://autoolstore.com/es/product/autool-pt620-engine-oil-pressure-gauge-0-426-psi-digital-display-automotive-tool-for-motorcycle-car-truck/
Empieza enTermina en07Días16H26Min28SegVer próximas ofertasComprar ahora
Kit de comprobación digital de presión de aceite de motor AUTOOL PT620 US$169.00
Consulta mayorista

Kit de comprobación digital de presión de aceite de motor AUTOOL PT620

US$169.00

Black Friday empieza prontoBLACK FRIDAY · FASE 1 · HASTA UN 20% DE DESCUENTO

Los precios bajan al comenzar las ofertas.

Empieza enTermina en07Días16H26Min28Seg

Compra más, ahorra más

  • US$100+Get 10% OFF
  • US$1,000+Get 15% OFF
  • US$5,000+Get 20% OFF

Características clave

US$169.00

Kit de comprobación digital de presión de aceite de motor AUTOOL PT620

US$169.00

Selecciona Almacén de envío

  • Garantía de 3 años Unidad principal 3 años · Accesorios 1 año
  • Devoluciones en 90 días Devoluciones elegibles dentro de 90 días
  • Tienda oficial Productos naturales · Soporte directo

AUTOOL PT620 Kit digital para comprobar la presión del aceite del motor

Lea la presión del aceite del motor en el puerto del sensor.

Mida la presión del aceite del motor en el puerto del sensor correspondiente y compárela con las especificaciones de servicio del vehículo.PT620 Registra la presión actual, máxima, mínima y diferencial, mientras que 18 tipos de conectores y una manguera resistente al aceite permiten el acceso a diversos puntos del compartimento del motor.

  • Rango de presión de aceite de 0 a 426,6 PSI
  • Precisión FS indicada de 0.5%
  • Actual / máximo / mínimo / diferencial
  • 18 tipos de adaptadores
  • Manguera resistente al aceite
AUTOOL PT620 oil pressure gauge kit main product image

Características principales

Presión de aceite en tiempo real, mínima/máxima y diferencial

Medición digital de presión

Mide la presión del aceite del motor mediante un sistema de medición digital en todo el rango mostrado, hasta 0–426,6 PSI, con una resolución de pantalla de 0,01.

Pantalla retroiluminada de 2.8 pulgadas

La pantalla retroiluminada de 2.8 pulgadas muestra la información de presión con claridad, facilitando la lectura en condiciones de poca luz en el taller o en el compartimento del motor.

Cambio entre varias unidades

Cambia las unidades de presión entre PSI, Bar y kg/cm² para adaptarse a distintos hábitos de servicio y referencias de información del vehículo.

Visualización de máx. / mín. / diferencial

La interfaz puede mostrar la presión actual, la presión máxima actual, la presión mínima actual, la presión diferencial y el tiempo de medición.

Retención de datos, borrado y ajuste a cero

Usa la tecla de bloqueo para mantener la interfaz actual, borrar los datos de prueba cuando sea necesario y poner a cero el valor de presión antes de la prueba.

Set de adaptadores de cobre remachados

Los adaptadores de cobre incluidos ayudan a admitir conexiones comunes de puertos de sensores de presión de aceite del motor y resisten el desgaste y la oxidación durante el uso normal.

Alimentación por pilas AAA

PT620 usa cuatro pilas AAA de 1.5V. Abra la tapa de las pilas en la parte trasera del dispositivo, inserte las pilas con la polaridad correcta y cierre bien la tapa antes de usarlo.

Conexiones de presión de aceite

Adaptadores roscados, un conector rápido en ángulo recto y una conexión de soporte de manguera resistente al aceite para los puntos de prueba de presión del aceite del motor.

18 tipos de adaptadores

Las imágenes de comparación y de adaptadores del PT620 muestran 18 tipos de conectores accesorios para la configuración de prueba de presión de aceite del motor.

Tamaños de rosca comunes

Los tamaños de adaptador mostrados incluyen:M10×1.0,M10×1,25,M12×1,25,M12×1.5,M12×1,75,M14×1,25,M14×1.5,M16×1,25,M16×1.5,M18×1.5, 3/8-24UNF, 1/2-20UNF,NPT-1/4-18,NPT-1/8-27,NPT-3/8-18,ZG1/8-28,ZG1/4-19 y ZG3/8-19. Haga coincidir la rosca y el método de sellado con el punto de prueba del motor antes de la conexión.

Conector rápido en ángulo recto

El conector en ángulo recto ayuda en espacios reducidos del compartimento del motor donde una conexión recta puede ser incómoda.

Manguera resistente al aceite

La manguera de transferencia está diseñada para las necesidades de conexión en pruebas de presión de aceite. Revise la manguera y los accesorios antes de cada prueba.

Apagado automático

El dispositivo se apaga automáticamente después de 5 minutos de inactividad cuando no se aplica presión.

Precisión de presión

Precisión: 0.5% FS.

Soporte de garantía durante 3 años

Unidad principal: garantía de 3 años. Accesorios estándar: garantía de 1 año. Política de garantía.

Procedimiento de servicio

Instale el adaptador y realice la prueba siguiendo el procedimiento.

01

Paso 1

Retire el sensor

Retire el sensor de presión de aceite del motor según el procedimiento de servicio del vehículo.

Uso seguro

Controlar la exposición al aceite caliente, las mangueras y la presión.

No sobrecargues

Use el manómetro dentro del rango de prueba nominal y no supere la presión de sobrecarga indicada.

Haga coincidir el adaptador con el puerto.

Seleccione el adaptador adecuado para el vehículo y el puerto del sensor de presión de aceite del motor. No fuerce un adaptador en un puerto incompatible.

Asegure la conexión antes de comenzar.

Conecte firmemente la sonda de medición al punto de prueba de presión de aceite del motor. Arranque el motor solo después de que la conexión esté correctamente establecida y el manómetro esté listo.

Libere la presión antes de apagar el motor.

Después de la medición, apague el dispositivo bajo presión atmosférica.

Inspeccione la manguera y los racores.

Compruebe la manguera y las conexiones antes de cada prueba. Apriete cualquier conexión suelta antes de la puesta en marcha.

Compruebe primero los racores

Compruebe regularmente las piezas que deben apretarse o conectarse. Apriete los racores sueltos antes de usarlo.

Evite líquidos corrosivos

Evite el contacto con líquidos corrosivos y limpie, cuando sea necesario, las piezas que entren en contacto con medios químicos después de su uso.

Proteja la carcasa

No frote el producto contra superficies rugosas ni dañe la carcasa durante el almacenamiento y el uso.

Guardar en un lugar seco

Guarde el producto en un lugar seco. No lo almacene en lugares calurosos, húmedos o mal ventilados.

Compare la presión del aceite con las especificaciones.

Utilice la manguera apta para aceite y el adaptador de motor correcto, y luego compare la presión a la temperatura y velocidad del motor especificadas con las especificaciones del vehículo.

Comparativa de modelos

Elige el juego de prueba de presión adecuado

Comparar modelos

Elija uno o más modelos. PT620 Oil Pressure Gauge Kit se selecciona por defecto.

1 modelo seleccionado

Se selecciona PT620 Oil Pressure Gauge Kit. Elige otro modelo para una comparación de lado a lado.

PT620 Oil Pressure Gauge Kit especificaciones

Nombre del producto
ModeloPT620 Oil Pressure Gauge Kit
Medición y lectura
Pantalla
2.8-inch
Almacenamiento de datos
×No incluido
Rango de presión
0-426.6psi
0-30kg/cm²
0-29.4bar
Prueba de presión de doble canal
×No incluido
Bloquear/borrar/registrar datos
✓Incluido
Pantalla multiparámetro
Tiempo de medición
Presión
Presión máxima
Presión mínima
Diferencial
Unidades de presión
Psi
Bar
Kg/cm²
Conexiones y aplicaciones
Conectores de accesorios
Tipos 18
Caja de herramientas equipada
✓Incluido
Escenarios de aplicación
Sistema de circulación de aceite del motor

Manual & Asistencia

Encuentra el manual y las indicaciones sobre adaptadores

AUTOOL PT620 user manual cover
Manual (PDF)

Manual de usuario AUTOOL PT620

Abra el manual en PDF para AUTOOL PT620 Pruebas de presión de aceite, selección de unidades, configuración de adaptadores y mangueras, lecturas máximas y mínimas, puesta a cero, seguridad y asistencia para la resolución de problemas.

AUTOOL PT620 packing list with main unit storage case retail box hose right angle connector adapter set and user manual

Contenido del paquete

Consulta el contenido de la caja

  • Unidad principalKit de manómetro de presión de aceite AUTOOL PT620
  • Estuche de almacenamientoMaletín protector de transporte
  • Caja de ventaEmbalaje del producto AUTOOL PT620
  • ArtículoManguera de transferencia resistente al aceite
  • ArtículoConector de ángulo recto
  • AdaptadoresJuego de adaptadores
  • DocumentaciónManual de usuario

Preguntas de compradores

Preguntas sobre la conexión y la lectura de presión

¿Qué prueba el AUTOOL PT620?

PT620 Comprueba la presión de circulación del aceite del motor en automóviles, motocicletas, camiones y otros vehículos compatibles, tras ajustar el adaptador del puerto del sensor a la presión nominal. No es un comprobador de presión de cilindros, combustible, GDI, transmisión ni frenos.

¿Qué rango de presión admite el PT620?

Las imágenes del producto muestran un rango de visualización de 0-426.6 PSI, 0-30 kg/cm² y 0-29.4 Bar. El manual de usuario indica el rango como 0-30 Bar y la presión de sobrecarga como 40 Bar.

¿Qué unidades de presión puede mostrar el PT620?

El PT620 admite PSI, Bar y kg/cm². Use el botón de unidad de presión para cambiar las unidades según sus requisitos de prueba.

¿PT620 guarda varios conjuntos de datos de prueba?

PT620 admite bloqueo de datos, bloqueo de interfaz, borrado de datos y puesta a cero de presión. No considere PT620 como un modelo de almacenamiento de varios conjuntos de datos salvo que lo confirme la versión más reciente del producto y el soporte del vendedor.

¿Qué pilas usa PT620?

PT620 usa cuatro pilas AAA de 1.5V. Abra la tapa de las pilas en la parte trasera del dispositivo, inserte las pilas con la polaridad correcta y cierre bien la tapa antes de usarlo.

¿Cuántos tipos de adaptadores se incluyen?

Las imágenes de comparación y adaptadores indican 18 tipos de conectores accesorios para PT620. La imagen de adaptadores muestra opciones de rosca métrica, UNF, NPT y ZG, además de un conector rápido en ángulo recto y una manguera de transferencia resistente al aceite. Confirme el tamaño de adaptador necesario antes de realizar la prueba.

¿Debo poner a cero el manómetro antes de la prueba?

Sí. Encienda el manómetro y ponga a cero el valor de presión antes de la prueba. El manual también indica que el apagado debe realizarse bajo presión atmosférica una vez finalizada la medición.

¿Se puede usar PT620 para pruebas de presión de combustible, GDI, transmisión o frenos?

PT620 es para pruebas de presión de aceite del motor. Para presión de combustible, compare PT630 o PT635. Para presión GDI, compare PT640. Para presión de aceite de transmisión, compare PT650. Para presión interna del líquido del sistema de frenos, compare PT660.

¿Qué incluye el paquete de PT620?

Contenido del paquete:PT620 Unidad principal, estuche de almacenamiento, caja de venta al público, manguera de transferencia, conector rápido en ángulo recto, juego de adaptadores y manual de usuario.

¿Cuánto dura la garantía?

Unidad principal: garantía de 3 años. Accesorios estándar: garantía de 1 año. Política de garantía.

Opiniones de clientes 6

Leo B.Compra verificada

Good

Works well. Easy to use. Seems to be pretty accurate. Has multiple adapters for any situation. Large screen that's easy to see and read.

Mark

Easy to use, and the display is clear when checking engine oil pressure. A handy tool to have in the garage.

FrankCompra verificada

Good tool for Audi 2.0t diagnostics

This worked very well for trying to get a handle on the common Audi 2.0t low oil pressure issue (B8 series A5 in this case). Since these cars often develop low oil pressure warnings at low rpm with a warm engine, I thought I’d share our results.
I wanted a device that would log the lowest pressure while driving so we could see what happened to trigger these car warnings and see if the pressure was really low enough to be a major concern. These cars don’t have pressure sensors, only low pressure warning triggers for the alert, so no way to see pressures without an external gauge such as this.

I did not see many options for a reasonably priced alternative that was available fast so I rolled the dice and ordered this oil pressure test kit even though it had few reviews and most of them were Vine sponsored. The thing showed up less than 12 hours after ordering which was great. Always a little suspicious of Chinese goods I was pleasantly surprised to find the build quality of the device, packaging, and adapters all looked quite good. No rough threads or questionable milled bits. On mine the hose with quick coupler fitting and hose came screwed on black threaded sensor right out of the box. The quick coupler was well made and seemed secure enough when attached to an adapter to be ok taped to the engine while driving around a bit.

One thing to note, the adapter assortment is vast, but they are not labeled with the thread spec, so it’s necessary to verify what the car has. In our case I knew we needed an m10x1 thread, which turned out to be the #1 adapter and also the first on the printed list that came in that box. The adapters are numbered 1-16, but the printed list of sizes included is not numbered. It may be that the list is in numerical order that it matches the adapter numbers, but I can’t confirm. I included a picture of the list in my review.

We removed the upper oil pressure sensor from the car, screwed in the #1 adapter that matched its threads, and then connected the quick coupler. I just put a jumper wire in the cars sensor plug to ground so the car would not constantly beep at us during the test. A tee adapter would allow for use of both this and the car sensors at the same time, but we did not have one yet so we just went for it.

The wire from the unit’s sensor was long enough to run up across the engine, out under the rear edge of the hood, and into the passenger side window so we could monitor it in real time while driving.

Bottom line, once we figured out the interface buttons, it worked great and confirmed we did have adequate oil pressure at idle when warm, which we deemed sufficient for idle speed (though below audi specs) and immediately rises above idle, topping out at the car’s relief valve pressure of about 51-52 psi. There is about a second or so of latency between pressure changes and the display reading shift, but it’s a nice window into the engine pressure and range.

Worth noting it works a bit like a weight scale in that holding down one of the buttons recalibrates to zero, which you don’t want to do with it hooked up and car running or actual pressure becomes zero on the display. A short tap of the same button instead of long hold resets the high and low recording to zero without resetting the calibration. This is crucial for lowest pressure log since it will start at zero before you turn the car on! So after starting the engine you’ll want to tap that button to zero out the pressure high/low without changing the baseline calibration to zero. Took us a minute to figure that all out. It’s a good device which I can recommend.

The rest of this review only pertains to other Audi 2.0t engine owners in case they are in the same boat. We were dealing with this plus usual bad piston ring design oil consumption issue. We used this tester after tearing the engine down to replace pistons and timing chains. We removed all the stupid oil screens, decided the cam journals and balance shaft bearings were ok, and the oil pump had been replaced already so we kept it. We installed new Wossner pistons that use factory 21mm connecting rod pins and rods, but have proper wide waffle oil control rings. This totally solves the oil consumption and black oil too! We did leave the two stage oil pump in high pressure mode by not connecting the wire near the sump that allows it to shift into low pressure mode at lower revs. But we still get low pressure at warm idle, just not catastrophically low. Maybe 13-15 psi. It instantly jumps up above 20 psi above idle and is linear with revs up to 51 psi limit. Not sure where the oil pressure leakage is that is still haunting us, but seems fine to drive for now. Possibly intake cam phaser. I’ll try to post a YouTube video on this whole deal soon. Will update this review with what to look for if I do.

Valoraciones6

5,0 / 5Basado en 6 reseñas
4 ★0
3 ★0
2 ★0
1 ★0
Leo B.Compra verificada

Good

Works well. Easy to use. Seems to be pretty accurate. Has multiple adapters for any situation. Large screen that's easy to see and read.

Mark

Easy to use, and the display is clear when checking engine oil pressure. A handy tool to have in the garage.

FrankCompra verificada

Good tool for Audi 2.0t diagnostics

This worked very well for trying to get a handle on the common Audi 2.0t low oil pressure issue (B8 series A5 in this case). Since these cars often develop low oil pressure warnings at low rpm with a warm engine, I thought I’d share our results.
I wanted a device that would log the lowest pressure while driving so we could see what happened to trigger these car warnings and see if the pressure was really low enough to be a major concern. These cars don’t have pressure sensors, only low pressure warning triggers for the alert, so no way to see pressures without an external gauge such as this.

I did not see many options for a reasonably priced alternative that was available fast so I rolled the dice and ordered this oil pressure test kit even though it had few reviews and most of them were Vine sponsored. The thing showed up less than 12 hours after ordering which was great. Always a little suspicious of Chinese goods I was pleasantly surprised to find the build quality of the device, packaging, and adapters all looked quite good. No rough threads or questionable milled bits. On mine the hose with quick coupler fitting and hose came screwed on black threaded sensor right out of the box. The quick coupler was well made and seemed secure enough when attached to an adapter to be ok taped to the engine while driving around a bit.

One thing to note, the adapter assortment is vast, but they are not labeled with the thread spec, so it’s necessary to verify what the car has. In our case I knew we needed an m10x1 thread, which turned out to be the #1 adapter and also the first on the printed list that came in that box. The adapters are numbered 1-16, but the printed list of sizes included is not numbered. It may be that the list is in numerical order that it matches the adapter numbers, but I can’t confirm. I included a picture of the list in my review.

We removed the upper oil pressure sensor from the car, screwed in the #1 adapter that matched its threads, and then connected the quick coupler. I just put a jumper wire in the cars sensor plug to ground so the car would not constantly beep at us during the test. A tee adapter would allow for use of both this and the car sensors at the same time, but we did not have one yet so we just went for it.

The wire from the unit’s sensor was long enough to run up across the engine, out under the rear edge of the hood, and into the passenger side window so we could monitor it in real time while driving.

Bottom line, once we figured out the interface buttons, it worked great and confirmed we did have adequate oil pressure at idle when warm, which we deemed sufficient for idle speed (though below audi specs) and immediately rises above idle, topping out at the car’s relief valve pressure of about 51-52 psi. There is about a second or so of latency between pressure changes and the display reading shift, but it’s a nice window into the engine pressure and range.

Worth noting it works a bit like a weight scale in that holding down one of the buttons recalibrates to zero, which you don’t want to do with it hooked up and car running or actual pressure becomes zero on the display. A short tap of the same button instead of long hold resets the high and low recording to zero without resetting the calibration. This is crucial for lowest pressure log since it will start at zero before you turn the car on! So after starting the engine you’ll want to tap that button to zero out the pressure high/low without changing the baseline calibration to zero. Took us a minute to figure that all out. It’s a good device which I can recommend.

The rest of this review only pertains to other Audi 2.0t engine owners in case they are in the same boat. We were dealing with this plus usual bad piston ring design oil consumption issue. We used this tester after tearing the engine down to replace pistons and timing chains. We removed all the stupid oil screens, decided the cam journals and balance shaft bearings were ok, and the oil pump had been replaced already so we kept it. We installed new Wossner pistons that use factory 21mm connecting rod pins and rods, but have proper wide waffle oil control rings. This totally solves the oil consumption and black oil too! We did leave the two stage oil pump in high pressure mode by not connecting the wire near the sump that allows it to shift into low pressure mode at lower revs. But we still get low pressure at warm idle, just not catastrophically low. Maybe 13-15 psi. It instantly jumps up above 20 psi above idle and is linear with revs up to 51 psi limit. Not sure where the oil pressure leakage is that is still haunting us, but seems fine to drive for now. Possibly intake cam phaser. I’ll try to post a YouTube video on this whole deal soon. Will update this review with what to look for if I do.

Leo B.Compra verificada

Good

Works well. Easy to use. Seems to be pretty accurate. Has multiple adapters for any situation. Large screen that's easy to see and read.

Basil O.Compra verificada

Surprised how good this Engine fluid tester actually is.

Surprised how good this Engine fluid tester actually is. Identical results compared with much more expensive testers. Very fast delivery and excellent communication too. Recommended seller.

csokaCompra verificada

Super! fast!

Super! fast!

Escribe un comentario

Kit de comprobación digital de presión de aceite de motor AUTOOL PT620
Valoración general *
¿Qué destacarías?opcional, hasta 3
Añadir fotos0 / 5
JPG, PNG o WebP, hasta 5 MB cada uno.

Las revisiones se verifican antes de que aparezcan. La compra verificada se añade automáticamente cuando su correo electrónico coincide con un pedido.

Características clave

Especificaciones

Pantalla
2.8-inch
Almacenamiento de datos
×
Rango de presión
0-426.6psi0-30kg/cm²0-29.4bar
Prueba de presión de doble canal
×
Bloquear/borrar/registrar datos
✓
Pantalla multiparámetro
Tiempo de mediciónPresiónPresión máximaPresión mínimaDiferencial
Unidades de presión
PsiBarKg/cm²
Conectores de accesorios
Tipos 18
Caja de herramientas equipada
✓
Escenarios de aplicación
Sistema de circulación de aceite del motor

Solicitar presupuesto

AUTOOL Equipment Inquiry (multi-step)
AUTOOL PT620 Digital Engine Oil Pressure Tester Kit
Kit de comprobación digital de presión de aceite de motor AUTOOL PT620

US$169.00

Seleccionar opciones Este producto tiene múltiples variantes. Las opciones se pueden elegir en la página de producto