AUTOOL ATL-4D Clear-Floor Two-Post Car Lift with Single-Side Unlocking
Price range: US$2,699.00 through US$2,799.00
- 4,000 kg Gantry Lift
- One-Side Dual Release
- Chainless Dual-Cylinder Drive
- Steel-Cable Balance
- 4,000 kg Gantry Lift: Lift compatible SUVs, vans, pickups, and light trucks in a gantry two-post system rated to 4,000 kg.
- One-Side Dual Release: Release both column safety locks together from one control side.
- Chainless Dual-Cylinder Drive: Apply lifting force through a chainless dual-cylinder direct-drive hydraulic system.
- Steel-Cable Balance: Keep both columns lifting evenly through the synchronized steel-cable balance system.
- Rack Mechanical Locks: Hold selected lift heights with rack-and-pinion mechanical locking devices.
- 4,000 kg Gantry Lift: Lift compatible SUVs, vans, pickups, and light trucks in a gantry two-post system rated to 4,000 kg.
- One-Side Dual Release: Release both column safety locks together from one control side.
- Chainless Dual-Cylinder Drive: Apply lifting force through a chainless dual-cylinder direct-drive hydraulic system.
- Steel-Cable Balance: Keep both columns lifting evenly through the synchronized steel-cable balance system.
- Rack Mechanical Locks: Hold selected lift heights with rack-and-pinion mechanical locking devices.
- 3-Year Warranty Main unit 3 years · Accessories 1 year
- 90-Day Returns Eligible returns within 90 days
- Official Store Genuine products · Direct support
AUTOOL ATL-4D · 4,000 kg Gantry Two-Post Lift
Release Both Columns from One Side
Release both columns from one side with synchronized unlocking. The ATL-4D combines a chainless dual-cylinder drive and steel-cable balancing for workshop vehicle service, with self-lubricating slide blocks to reduce friction and noise. Vehicle and installation requirements must match the job.
- 4,000 kg Two-Post Layout
- Single-Side Lock Release
- Dual-Cylinder Direct Drive
- Steel-Cable Synchronization
- Rack Mechanical Locks
Key Features
Direct-Drive Hydraulics, Cable Balance, and Mechanical Locks
Single-Side Dual-Lock Release
Operate from one column side to unlock both columns at the same time. This simplifies operation and reduces the risk of vehicle tilt caused by single-side misoperation or unsynchronized unlocking.
Dual-Cylinder Direct Drive
The chainless dual-cylinder direct-drive hydraulic system transfers lifting force through hydraulic cylinders, reducing chain wear risk and improving long-term reliability.
Steel Cable Balance System
A synchronized steel cable balance mechanism helps both columns lift evenly and maintain stable movement through the lifting process.
Precision Steel Structure
Laser-cut steel plates, strong steel tubing, shot blasting, and high-temperature coating help improve assembly accuracy, corrosion resistance, scratch resistance, and durability.
CNC-Machined Hydraulic Cylinders
Key hydraulic cylinder components are machined with fully automated CNC lathes, while cylinder barrel inner walls use roller burnishing to reduce friction and extend service life.
Wear-Resistant Slide Blocks
Polymer composite self-lubricating slide blocks reduce metal-to-metal friction, lower operation noise during long-term load lifting, and simplify future maintenance.
Simultaneous Mechanical Lock Release
Single-side control releases the safety locks on both columns at the same time, reducing operational complexity and misoperation risk.
Rack-And-Pinion Mechanical Locking
Mechanical rack-and-pinion locking devices work with the electrical system to provide stable backup protection at selected lift heights.
Hook-Type Safety Lock
The technical image highlights a more stable hook-type safety lock designed to help prevent slippage caused by slider wear.
Static and Dynamic Load Test Reference
The technical image lists 150% static test and 115% dynamic test references under EU testing standards.
Lift Configuration
ATL-4D combines steel construction, direct hydraulic drive, synchronized lifting, precision-machined cylinders, sealing components, low-noise slide blocks, mechanical locking, synchronized release, and electrical interlock logic for workshop vehicle lifting.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
How to Use
Position, Raise, Lock and Lower the Vehicle
Qualify the Installation Site
Before vehicle lift installation, confirm the lift drawing, concrete strength and thickness, anchors, ceiling and door clearance, power, air where required, and vehicle approach space.
Inspect Before Use
Check anchors, columns or platforms, arms, pads, hoses, cables, cylinders, locks and synchronization components before loading a vehicle.
Position the Vehicle
Center the vehicle within the model geometry and keep doors, tires and bodywork clear of columns, platforms and moving parts.
Set Approved Pickup Points
Use the vehicle manufacturer’s approved pickup points and match arm, pad, platform and extension placement to the actual wheelbase and load distribution.
Raise and Check Stability
Lift only enough to take the load, stop and verify all contact points and vehicle balance, then continue while watching both sides.
Engage and Verify Locks
Lower onto the mechanical locks and confirm both sides are engaged before anyone enters the work area below the vehicle.
Clear and Lower
Remove tools and people, raise enough to release the locks as designed, lower through the controlled descent and check the lift after the vehicle exits.
Safety & Compatibility
Qualify the Bay Before the First Lift
Stay Within the Rated Configuration
Do not exceed the model’s rated load, and do not assume the capacity alone proves fit for a particular vehicle or load distribution.
Use the Required Foundation
Install and anchor the lift only to the specified concrete foundation and layout; obtain the model installation drawing before site work.
Use Approved Vehicle Pickup Points
Match arms, pads or platforms to the vehicle manufacturer’s lift points and keep the vehicle balanced.
Keep Clear of Moving and Pinch Zones
Keep people, tools, hoses and body parts away from arms, platforms, locks, cables and scissor mechanisms during movement.
Verify Locks Before Working Below
Confirm the mechanical locks are fully and evenly engaged before entering beneath the raised vehicle.
Inspect Hydraulic and Synchronizing Parts
Stop use if hoses, cylinders, cables, chains, seals, anchors or synchronization behavior show damage, leakage or abnormal movement.
Confirm Optional Equipment
Infrared, foot, arm or other optional protection is present only when it is included in the ordered configuration.
Site Planning Details
Use the technical drawing to confirm floor size, ceiling height, column spacing, total width, arm swing clearance, vehicle size, foundation, motor voltage, and installation details.
Capacity and Option Check
The product name lists 4000kg while a technical graphic lists 4500kg; confirm the exact nameplate capacity before ordering or loading. Optional EU-standard 5.5T lifting arms and electronic unlocking must be confirmed for the ordered configuration.
Qualified Installation and Inspection
Use qualified installation and complete the required safety inspection before operation.
Specifications
Capacity, Geometry and Utility Requirements
| Specification | Value |
|---|---|
| Minimum Height | 105 mm |
| Maximum Lift Height | 1845 mm |
| Overall Height | 3700 mm |
| Motor Power | 2.2 kW |
| Concrete Base | more than 500 mm thick and level |
| Power Configuration | 380 V / 220 V / Others, 2.2 kW |
| Optional Lifting Arms | EU-standard 5.5 T arms. |
Manual & Support
Confirm Installation and Ordered Configuration
AUTOOL ATL-4D Manual & Guides
Visit the manual download center to find ATL-4D guidance for vehicle positioning, dual-cylinder lifting and cable balancing, plus lock safety and troubleshooting support.
Package Contents
Verify the Supplied Lift Package
- Package ConfigurationConfirm the exact included items for the selected order configuration.
- Main And Auxiliary UnitsListed package figures: main and auxiliary units 383 × 44 × 72 / 671kg; electrical control box 83 × 28 × 31 / 20kg; accessories box 40 × 40 × 25 / 15kg. Confirm the dimension unit with AUTOOL before planning freight or receiving.
FAQs
Vehicle, Bay and Installation Questions
What Is The Rated Lifting Capacity Of ATL-4D?
The ATL-4D product name lists 4000kg, while a technical graphic lists 4500kg. Confirm the exact unit rating and nameplate before ordering or loading the lift.
What Vehicles Can ATL-4D Lift?
ATL-4D is designed for SUVs, vans, pickups, and light trucks, provided that the vehicle weight, lift arm position, and workshop installation conditions match the lift requirements.
What Is Single-Side Control?
Single-side control allows the operator to unlock both columns from one side at the same time, simplifying operation and reducing the risk of uneven unlocking.
What Is The Main Safety Lock Design?
ATL-4D uses mechanical locking protection. The technical image also highlights a more stable hook-type safety lock designed to reduce slippage risk caused by slider wear.
What Installation Base Is Required?
The technical image states that the concrete base for lift installation should be more than 500mm thick and level.
What Motor Power Does ATL-4D Use?
The technical image lists motor power as 380V / 220V / Others, 2.2KW. Confirm the correct voltage configuration before ordering.
Are 5.5T Lifting Arms Included?
EU-standard 5.5T lifting arms are optional. Confirm whether this option is included or needs to be purchased separately before ordering.
Does Electronic Unlocking Require Extra Budget?
For ATL-4D, ATL-4.5D, and ATL-4.5DW models that require electronic unlocking, additional budget may be needed. Contact AUTOOL Store for consultation.
No reviews yetBe the first to share your experience with this product.