3-Year Warranty
Main unit 3 years · Accessories 1 year
90-Day Returns
Eligible returns within 90 days
Official Store
Genuine products · Direct support
AUTOOL OD720
Product Overview
The AUTOOL OD720 Pneumatic Oil Drainer And Extractor is a compressed-air powered waste oil drainer and vacuum oil extraction machine for workshop engine oil service. Its patented vacuum generation structure evacuates the tempered measuring cup or oil storage tank, allowing external air pressure to draw waste oil through the evacuation wand into the measuring cup or tank. It is suitable for measuring cup extraction, oil catch pan recovery, and storage tank discharge under the specified air pressure and safety conditions.
Review the air pressure range, oil temperature limit, prohibited liquids, engine-off rule, pressure release, and personal protection requirements before using the OD720 waste oil extractor.
Use 6-8bar Air Supply
The air source pressure must stay within the specified range. Do not operate below or above the required pressure, otherwise normal operation and safety may be affected.
Do Not Use With Flammable Liquids
OD720 is strictly prohibited for brake oil, gasoline, diesel, methanol, ketone, and other flammable liquids. Use it only for functions listed in the manual.
Engine Must Stay Off
The engine must remain turned off throughout the operation. Do not operate the equipment around smoking, open flames, high-temperature, high-pressure, flammable, or explosive areas.
40-60°C Waste Oil Range
Waste oil is handled at 40-60°C. Be careful of burns. Waste oil above 60°C may damage equipment components.
Wear Eye And Hand Protection
Wear gloves and safety goggles during operation to protect your hands and eyes from hot waste oil and splashes.
Release Pressure After Use
After completing operation, release internal pressure and clean the equipment to reduce equipment damage and personnel injury caused by improper operation.
Safety Reminder
If hoses or components leak during operation, immediately shut off the air supply and inspect the equipment carefully.
Do not use the height-adjustable lifting rod as a handle for moving the machine. Tighten adjustment screws if they become loose.
Promptly empty waste oil from the measuring cup into the storage tank after extraction to better protect the measuring cup and extend its service life.
After emptying the measuring cup, there is no need to close the measuring cup drain valve unless required by the specific operation step.
Dispose of or recycle waste oil according to local regulations and relevant authorities.
Do not attempt unauthorized disassembly, modification, or self-repair. Contact authorized service support when maintenance is needed.
Key Features
Key Features
OD720 combines pneumatic vacuum extraction, a 10L tempered measuring cup, a 70L thickened tank, a 20L large oil catch pan, adjustable working height, and multiple evacuation wands for workshop oil service.
Rapid Vacuum Extraction
Using pressurized air and a vacuum generator, OD720 creates strong negative pressure for fast waste oil extraction through the evacuation wand.
10L Tempered Measuring Cup
The transparent hardened measuring cup is designed for strength, clarity, heat resistance, weather durability, and corrosion resistance. Its scale marks help observe oil quality and quantity.
70L Thickened Storage Tank
The 70L storage tank uses 1.5mm thickened material to help reduce oil leakage and air leakage during waste oil recovery.
20L Large Oil Catch Pan
The 41cm large-size oil catch pan provides a wider oil-catching area and a 20L capacity for gravity waste oil recovery.
Adjustable Height To 1.5m
The height-adjustable lifting rod mechanism allows the oil pan height to be adjusted up to 1.5m for different working conditions.
5 Evacuation Wands
OD720 includes 5 corrosion-resistant evacuation wands of different diameters for different vehicle oil inlets and service needs.
360° Swivel Casters
The machine is equipped with 360° swivel casters for easier movement. The casters include locking devices for more stable workshop positioning.
Sight Window And Tool Tray
The oil level sight window helps monitor waste oil recovery, while the tool tray provides a convenient area for small tools during service.
Warranty And Lifetime Maintenance
AUTOOL provides 3-year support for eligible non-human damage cases and lifetime maintenance support for setup, accessories, and troubleshooting.
Click to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlargeClick to enlarge
How It Works
How It Works
OD720 uses compressed air to generate vacuum inside the measuring cup or storage tank, then pulls waste oil through the extraction wand into the cup or tank under the correct operating conditions.
Compressed Air Input
Connect the air supply to the vacuum generator or tank inlet valve according to the required operation. The specified air supply range is 6-8bar.
Vacuum Generation
The vacuum generator evacuates the tempered measuring cup or oil storage tank, creating negative pressure for suction extraction.
Oil Extraction
External air pressure draws waste oil through the selected oil evacuation wand and oil extraction hose into the measuring cup or storage tank.
Oil Recovery Through Pan
For gravity recovery, lift the vehicle, align the oil catch pan with the engine drain hole, and allow waste oil to flow into the storage tank.
Tank Discharge
When discharging the storage tank, pressurize the tank through the oil tank inlet valve, then slowly open the drain valve after pressure builds.
Safety Control
The oil tank safety valve releases pressure when tank pressure exceeds 1.0bar. Always cut off the air supply after discharging oil.
Specifications
OD720 Product Specifications
The OD720 specification set covers air supply, oil discharge pressure, vacuum level, capacities, working oil temperature, evacuation wands, and machine dimensions.
Air And Vacuum
Air Supply Pressure
6-8bar
Oil Discharge Pressure
0.6-0.8bar
Air Consumption
150L/min
Vacuum Level
0-65cmHg
Capacity
Oil Storage Tank Capacity
70L / 18.5gal
Measuring Cup Capacity
10L / 2.6gal
Oil Catch Pan Capacity
20L / 5.3gal
Operation
Working Oil Temperature
40-60°C
Oil Evacuation Wands
5 PCS
Use Restriction
Do not use with brake oil, gasoline, diesel, methanol, ketone, or flammable liquids
Size
Product Dimensions
570 × 500 × 1307mm
Packaging Dimensions
53 × 53 × 100cm
Support
Main Unit Warranty
3 years
Included Accessories Warranty
1 year
Product Structure
Structure Overview
The structure diagram identifies the main working parts used for oil catch pan recovery, measuring cup extraction, vacuum generation, tank discharge, movement, and storage.
A / B / C
Oil catch pan, measuring cup press valve, and safety valve
D / E / F
Vacuum generator and inlet, tempered glass measuring cup, and tool tray
G / H / I
Handle, drain hose, and drain device
J / K / L
Oil tank safety valve, oil tank inlet valve, and swivel casters with brakes
M / N / O
Height-adjustable lifting rod mechanism, oil evacuation wands, and oil extraction hose
P / Q / R
Wands holder, check valve assembly, and oil storage tank
Click to enlargeClick to enlarge
Air And Vacuum
Air Supply Pressure6-8bar
Oil Discharge Pressure0.6-0.8bar
Air Consumption150L/min
Vacuum Level0-65cmHg
Capacity
Oil Storage Tank Capacity70L / 18.5gal
Measuring Cup Capacity10L / 2.6gal
Oil Catch Pan Capacity20L / 5.3gal
Operation
Working Oil Temperature40-60°C
Oil Evacuation Wands5 PCS
Use RestrictionDo not use with brake oil, gasoline, diesel, methanol, ketone, or flammable liquids
Size
Product Dimensions570 × 500 × 1307mm
Packaging Dimensions53 × 53 × 100cm
Support
Main Unit Warranty3 years
Included Accessories Warranty1 year
Product Structure
Structure OverviewThe structure diagram identifies the main working parts used for oil catch pan recovery, measuring cup extraction, vacuum generation, tank discharge, movement, and storage.
A / B / COil catch pan, measuring cup press valve, and safety valve
D / E / FVacuum generator and inlet, tempered glass measuring cup, and tool tray
G / H / IHandle, drain hose, and drain device
J / K / LOil tank safety valve, oil tank inlet valve, and swivel casters with brakes
M / N / OHeight-adjustable lifting rod mechanism, oil evacuation wands, and oil extraction hose
P / Q / RWands holder, check valve assembly, and oil storage tank
How To Use
How To Use
Use OD720 with the correct air supply, valve positions, evacuation wand, and oil temperature range. The machine supports measuring cup extraction, measuring cup draining, oil pan recovery, and oil storage tank discharge.
1. Install The Main Assemblies
Rotate the measuring cup assembly clockwise to secure it onto the positioning seat of the oil storage tank. Fix the lifting rod and oil pan funnel by rotating clockwise. Confirm the measuring cup assembly direction, lock it in place, and keep the lifting rod vertical to the equipment.
Turn the lifting rod adjustment device counterclockwise to adjust the oil pan height.
Turn it clockwise to tighten after adjustment.
2. Extract Oil Through The Measuring Cup
Set the measuring cup valve to the middle slot position so the valve is closed. Close the oil extraction hose valve and connect the correct vehicle-specific oil evacuation wand.
Connect the air supply to the vacuum generator inlet and open the air supply valve.
Adjust the vacuum pressure gauge needle to the rated negative pressure of 50-65cmHg.
Insert the oil evacuation wand into the engine compartment, then open the oil extraction hose valve to start extracting waste oil.
3. Drain The Measuring Cup Into The Tank
When the oil level in the measuring cup reaches the warning line, drain the waste oil in the measuring cup into the oil storage tank below.
Press and rotate the measuring cup valve to the top left or right slot position so the valve is open.
Waste oil inside the measuring cup will automatically flow into the oil storage tank.
To extend the service life of the measuring cup assembly, do not close the measuring cup drain valve when not emptying oil into the storage tank.
Do not use waste oil above 60°C, as it may damage equipment components.
4. Recover Waste Oil Through The Oil Pan
Use lifting equipment to raise the vehicle to a suitable height before oil pan recovery. In a safe workplace, move OD720 under the vehicle engine and align the oil pan funnel with the engine oil drain hole.
Unscrew the vehicle engine oil drain plug.
Waste oil will discharge into the storage tank through the oil pan funnel.
Suction extraction may support no-lift or trench working conditions when suitable. Oil pan recovery still requires lifting the vehicle to align the pan safely.
5. Discharge Waste Oil From The Storage Tank
Close the measuring cup push-button valve, close the oil discharge pipe valve, and close the oil tank inlet valve. Connect the air supply to the oil tank inlet valve.
Open the oil tank inlet valve and pressurize the tank.
Once pressure reaches a certain level, the check valve will automatically close.
When pressure inside the oil tank exceeds 1.0bar, the safety valve will automatically release pressure.
After 5 seconds, slowly open the oil drain valve.
After discharging oil, cut off the air supply.
Operation Notes
Always keep the engine off during operation.
Do not smoke or use open flames near the equipment.
Keep the air source within the specified 6-8bar range.
Do not extract brake oil, gasoline, diesel, methanol, ketone, or flammable liquids.
Wear gloves and safety goggles when handling waste oil.
Release internal pressure and clean the equipment after use.
Click to enlarge
What Is In The Box
What Is In The Box
The official packing list image shows the OD720 main oil storage tank and included accessories. Package details should be confirmed according to the final packing list image and actual shipped product.
Main BodyOD720 oil storage tank assembly with drain hose and tank valves
Measuring CupTempered glass measuring cup assembly with related hose component shown in the image
Oil Pan And RodOil catch pan and height-adjustable lifting rod mechanism
Evacuation WandsOil evacuation wand set and wands holder shown in the package image
Movement PartsSwivel caster set with brakes and handle/tool tray parts shown in the package image
Tools And ManualSmall tools and AUTOOL OD720 user manual shown in the package image
Product Comparison
Product Comparison
Compare the OD series before choosing the right waste oil drainer for catch pan recovery, vacuum extraction, measuring cup use, toolbox storage, tank capacity, and lift requirement.
OD710 FocusBasic 70L pneumatic waste oil drainer with large oil pan, adjustable height, thickened tank construction, oil level sight window, and 360° swivel casters. It does not include vacuum extraction, measuring cup, or evacuation wands.
OD720 FocusBalanced pneumatic oil drainer and extractor with 70L tank, 20L oil catch pan, 10L tempered measuring cup, rapid vacuum extraction, 5 evacuation wands, 6-8bar air supply, 150L/min air consumption, and 0-65cmHg vacuum level.
OD760 FocusHigher-end oil drainer and extractor with drawer structure, 80L tank, 10L measuring cup, rapid vacuum extraction, 5 evacuation wands, and toolbox-style workshop storage.
Lift RequirementThe comparison chart lists OD710 as requiring lifting equipment, while OD720 and OD760 are marked as not requiring lifting equipment for suitable vacuum extraction work. Oil pan recovery still requires safe vehicle lifting and pan alignment.
Decision CheckChoose by tank capacity, vacuum extraction need, measuring cup requirement, toolbox storage, air supply, evacuation wand support, and available workshop space.
Click to enlarge
Related Products
Related Products
Compare related AUTOOL OD series models before choosing a basic oil drainer, a vacuum oil extractor, or a higher-end drawer-style oil drainer and extractor.
Select options
This product has multiple variants. The options may be chosen on the product page
Select options
This product has multiple variants. The options may be chosen on the product page
Manual And Downloads
Manual And Downloads
Download the OD720 manual for technical data, product structure, installation, measuring cup extraction, measuring cup draining, waste oil recovery, storage tank discharge, maintenance, and warranty information.
Click to enlarge
AUTOOL OD720 User Manual
Open the official OD720 PDF manual for setup, operation, maintenance, and safe-use instructions.
Contact AUTOOL Store before ordering if you need to confirm air pressure, prohibited liquids, waste oil temperature, OD710 / OD720 / OD760 selection, package contents, accessories, or operation steps.
These answers cover air pressure, safe fluids, working oil temperature, no-lift use conditions, OD series model selection, measuring cup drainage, storage tank discharge, package contents, and warranty.
OD720 requires 6-8bar air supply pressure. The air source pressure must not be lower or higher than the specified range to ensure proper equipment operation.
OD720 can be used for suitable suction extraction work without lifting equipment or in trench working conditions. However, when using the oil catch pan for gravity waste oil recovery, the vehicle must be lifted to a suitable height and the oil pan must be aligned with the engine drain hole.
No. OD720 is strictly prohibited for brake oil, gasoline, diesel, methanol, ketone, and other flammable liquids. Do not use the equipment for functions not listed in the manual.
The working waste oil temperature range is 40-60°C. Be careful of burns when handling waste oil. If the waste oil temperature exceeds 60°C, equipment components may be damaged.
OD710 is a basic 70L pneumatic waste oil drainer without vacuum extraction, measuring cup, or evacuation wands. OD720 adds rapid vacuum extraction, a 10L tempered measuring cup, 5 evacuation wands, 6-8bar air supply, 150L/min air consumption, and 0-65cmHg vacuum level. OD760 is the higher-end model with drawer storage, an 80L tank, measuring cup, vacuum extraction, and 5 evacuation wands.
Drain the measuring cup when the oil level reaches the warning line. Press and rotate the measuring cup valve to the top left or right slot position so the valve is open, and waste oil will automatically flow into the oil storage tank.
Close the measuring cup push-button valve, oil discharge pipe valve, and oil tank inlet valve first. Connect the air supply to the oil tank inlet valve, open the inlet valve, and pressurize the tank. After about 5 seconds, slowly open the oil drain valve. After discharging oil, cut off the air supply.
When the pressure inside the oil tank exceeds 1.0bar, the oil tank safety valve automatically releases pressure. Always follow the tank discharge steps and cut off the air supply after discharging oil.
Refer to the Packing List image for final package contents. The package image shows the OD720 oil storage tank assembly, tempered measuring cup assembly, oil catch pan, lifting rod, evacuation wands, wands holder, hose components, caster set, handle/tool tray parts, small tools, and user manual.
AUTOOL provides a 3-year warranty for the main unit and a 1-year warranty for included accessories. For eligible non-human damage cases, contact support with order details, pictures, or video as needed.
Release internal pressure, clean the equipment, avoid rubbing the housing against rough surfaces, regularly check tightened and connected parts, treat parts exposed to chemical media with anti-corrosion maintenance, replace worn parts when needed, and store the product in a dry place away from hot, humid, or non-ventilated environments.
Warranty And Contact
Warranty And Contact
For OD720 setup, air pressure confirmation, prohibited liquid checks, OD series model selection, operation guidance, package contents, accessories, tank discharge troubleshooting, or warranty support, contact AUTOOL Store directly.
Pre-Sales And Product Support
Use support if you need help confirming whether OD720 is suitable for your workshop, whether OD710 / OD720 / OD760 is the better option, or how to safely use measuring cup extraction, oil catch pan recovery, and storage tank discharge.
OD710 / OD720 / OD760 model selection
6-8bar air supply and 0-65cmHg vacuum level confirmation
Allowed and prohibited liquids confirmation
40-60°C waste oil temperature and burn-risk reminders
Packing List and accessory confirmation
Measuring cup extraction, cup draining, oil pan recovery, and tank discharge guidance
Maintenance, replacement parts, and warranty support
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Click to enlarge
Kitty35 ✓ Verified Purchase –
Very sturdy
Smaller than I thought, but being compact actually works better. I just wish that it wasn’t so hard finding an oil catch that fits on the base