AUTOOL TCA505 / TCA506 Tilt-Back Tire Changer
Price range: US$2,799.00 through US$2,999.00
- Rear-Tilt Assisted Platform
- 12–24 Inch Rim Range
- TCA505 / TCA506 Choice
- Protected Rim Contact
- Rear-Tilt Assisted Platform: Use the rear-tilt structure and right-side auxiliary arm to support and press run-flat, low-profile, and hard-to-install tires.
- 12–24 Inch Rim Range: Work with supported 12–24 inch rims, 4–13 inch tire widths, and up to 1,100 mm tire outside diameter.
- TCA505 / TCA506 Choice: Choose TCA505 for assisted tire changing or TCA506 when you also need its independent bead blaster.
- Protected Rim Contact: Clamp with sleeved alloy-steel jaws and work through a stainless head with anti-scratch washers.
- Pneumatic Bead Breaking: Use the required 8–10 bar shop air with the bidirectional large cylinder and dual exhaust for bead breaking and faster return movement.
- Rear-Tilt Assisted Platform: Use the rear-tilt structure and right-side auxiliary arm to support and press run-flat, low-profile, and hard-to-install tires.
- 12–24 Inch Rim Range: Work with supported 12–24 inch rims, 4–13 inch tire widths, and up to 1,100 mm tire outside diameter.
- TCA505 / TCA506 Choice: Choose TCA505 for assisted tire changing or TCA506 when you also need its independent bead blaster.
- Protected Rim Contact: Clamp with sleeved alloy-steel jaws and work through a stainless head with anti-scratch washers.
- Pneumatic Bead Breaking: Use the required 8–10 bar shop air with the bidirectional large cylinder and dual exhaust for bead breaking and faster return movement.
- 3-Year Warranty Main unit 3 years · Accessories 1 year
- 90-Day Returns Eligible returns within 90 days
- Official Store Genuine products · Direct support
AUTOOL TCA505/506 · Tilt-Back Assisted Tire Changers
Control Run-Flat and Low-Profile Tire Service
Choose TCA505 for tilt-back tire service with a right-side auxiliary arm, or TCA506 when the same low-profile/run-flat workflow also needs an independent bead blaster. Both list 12–24 in rims, 4–13 in tire width, 1100 mm maximum tire outside diameter, and 8–10 bar shop air; confirm the regional power version before ordering.
- 12–24 in Rim Range
- 4–13 in Tire Width
- Right-Side Auxiliary Arm
- TCA506 Bead Blaster
- 8–10 bar Shop Air
Key Features
Use the Auxiliary Arm to Manage Stiff Beads
Right-Side Auxiliary Arm
The right-side auxiliary arm helps mount and dismount hard-to-install tires, with both tire support and tire pressing functions for run-flat and low-profile tires.
Stable Foot Valve Assembly
The foot valve assembly uses a pull-out design for easier maintenance, while the reinforced composite housing reduces vibration from the working head.
Alloy Steel Jaws With Protection Sleeves
Alloy steel jaws with quenched tips provide durable clamping, while jaw protection sleeves help protect rims from scratches during tire service.
Stainless Steel Dismounting Head
The tire dismounting head is made of stainless steel and equipped with anti-scratch washers for safer rim contact.
Bidirectional Large Cylinder and Dual Exhaust
The pneumatic system uses a bidirectional large cylinder and dual-exhaust structure to support stronger bead breaking and faster return movement.
TCA506 Only: Air Bead Blaster
TCA506 includes an independent tire bead blaster system, making it more suitable when bead seating assistance is required.
12–24-Inch Rim Coverage
TCA505 and TCA506 support 12–24-inch rims and 4–13-inch tire widths. The right-side auxiliary arm provides tire support and pressing assistance for mounting and dismounting.
Service Configuration
Choose TCA505 for standard auxiliary-arm tire changing needs. Choose TCA506 if bead seating assistance is important for your workshop workflow.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
How to Use
Deflate, Clamp, Demount, Mount, and Seat the Tire
Confirm Wheel and TCA505/506 Range
Check rim diameter and width, tire outside diameter, profile and condition, wheel weight, the approved machine clamping arrangement and whether TCA506 bead-blaster assistance is required.
Deflate Before Bead Service
Remove the valve core and verify the tire is fully deflated before using the bead breaker or demounting tool.
Break the Bead with Clearance
Lubricate the bead area, keep the bead-breaker shoe clear of the rim and keep hands and body outside the moving zone.
Center and Clamp the Wheel
Use the clamping arrangement approved for the machine and wheel, center the rim and confirm all jaws engage evenly.
Set the Tilt-Back Column and Head
Position the TCA505/506 tilt-back column and mounting head with the required rim clearance, protectors and approved tire lubricant.
Use the Right-Side Auxiliary Arm
Keep the bead in the drop center and use the supplied right-side auxiliary arm when the approved procedure calls for controlled sidewall support.
Seat and Inflate by Procedure
Use the approved restraint and tire/rim inflation procedure; use the TCA506 bead blaster only under its model procedure, keep clear of the trajectory zone and never exceed the applicable seating or service pressure.
Inspect the Finished Assembly
Check bead seating, valve condition, rim contact and tire condition before removing the wheel from the turntable.
Safety & Compatibility
Protect the Rim, Bead, Sensor and Operator
Fully Deflate First
Remove the valve core and confirm zero pressure before bead breaking or demounting.
Stay Clear of Pinch Zones
Keep hands and body clear of the bead breaker, jaws, turntable, mounting head and helper arms whenever controls are operated.
Match the Complete Wheel Range
Match rim diameter, tire width, outside diameter, wheel condition, and machine configuration to the published range before service.
Protect Bead, Rim and Sensors
Use approved lubricant, jaw and head protectors, correct drop-center technique and the vehicle procedure for TPMS-equipped wheels.
Control Inflation and Bead Seating
Use the tire and rim manufacturer’s pressure limits and required restraint; never stand in the tire trajectory zone during inflation.
Separate Shop Air from Tire Pressure
The listed 8–10 bar is the machine air-supply requirement. It is not a tire bead-seating pressure or final vehicle tire pressure.
Specifications
Wheel Range, Motor and Air Requirements
TCA505
TCA505 — Auxiliary arm / No bead blaster
TCA506
TCA506 — Auxiliary arm / Bead blaster
| Specification | Value |
|---|---|
| Rim Diameter | 12–24 in |
| Tire Width | 4–13 in; measurement object should be confirmed |
| Maximum Tire Outside Diameter | 1100 mm |
| Machine Air Supply | 8–10 bar; not tire inflation pressure |
| Power Supply / Motor Power | AC 220 / 380 V; 1.1 / 0.75 kW — confirm model and regional mapping |
Manual & Support
Confirm Wheel Range and Shop Setup
AUTOOL TCA505/506 Manual & Guides
Visit the manual download center to find TCA505/506 guidance for tilt-back service, auxiliary-arm use and bead breaking, plus rim safety and troubleshooting support.
Package Contents
Check Tire Changer Tools and Included Parts
- TCA505 PackageRear-tilt main unit with right-side auxiliary arm; published total shipping weight 352 kg
- TCA506 PackageRear-tilt main unit with right-side auxiliary arm and independent bead blaster; published total shipping weight 361 kg
- Main-Unit Package Size1150 × 950 × 980 mm
- Auxiliary-Arm Package Size1050 × 750 × 360 mm
- Contact Protection PartsConfirm the supplied jaw sleeves, stainless mounting-head protectors and service wear parts
- Power and Air ConfigurationLock the TCA505 or TCA506 voltage/motor mapping and the required 8–10 bar machine air supply
- DocumentationObtain the model-specific packing list, installation instructions and approved bead-seating procedure
- Included ComponentsMain unit: 115 × 95 × 98; swing arm: 105 × 75 × 36; combined listed weight: 352kg. · Published container-planning dimensions are 1150 × 950 × 980mm for the main unit and 1050 × 750 × 360mm for the auxiliary arm. Confirm the final units, shipping configuration, and unloading plan before arranging logistics.
FAQs
Wheel Range and Tire-Service Questions
What Is The Difference Between TCA505 And TCA506?
TCA505 uses a rear-tilt structure and right-side auxiliary arm. TCA506 adds an independent bead blaster for initial bead seating; set final tire pressure by the approved tire and rim procedure.
Does It Support Run-Flat And Low-Profile Tires?
Yes. The right-side auxiliary arm helps mount and dismount hard-to-install tires, including run-flat and low-profile tires.
The auxiliary-arm configurations are intended to support compatible low-profile, stiff-sidewall and run-flat work. Qualify the exact tire/rim combination, drop-center technique, lubricant, protectors and TPMS procedure before service.
What Air Pressure Is Required?
The detailed image lists the required air source pressure as 8-10bar.
The machine requires an 8–10 bar shop-air supply. This is not the tire bead-seating pressure or final vehicle tire pressure; use the approved tire and rim procedure for inflation.
What Rim Size Does It Support?
The detailed image lists the rim size range as 12-24″.
The published rim-diameter field is 12–24 inches. Also confirm the separate 4–13 inch width field, 1100 mm maximum tire outside diameter, clamping method, wheel condition and required protectors.
Does The Machine Help Protect Rims?
Yes. It uses alloy steel jaws with protection sleeves and a stainless steel dismounting head with anti-scratch washers to help reduce rim scratches.
The machines list jaw sleeves and mounting-head protectors. Correct centering, clamping, clearance, lubrication and tool placement still determine actual rim and bead contact.
Should I Confirm Shipping Weight Before Ordering?
Published total shipping weights are 352kg for TCA505 and 361kg for TCA506. Confirm the selected model, main-unit and auxiliary-arm packing dimensions, unloading plan, and final packing list.
No reviews yetBe the first to share your experience with this product.