AUTOOL SPT360 Spark Plug Tester Automotive Diagnostic

US$59.00

☰ REQUEST BULK / B2B QUOTEOfficial Quote Request
Secure checkoutFast supportBulk ready
AUTOOL SPT360

Product Overview

The AUTOOL SPT360 is a five-hole digital high-frequency spark plug tester for comparing spark plug performance and ignition strength under simulated engine speed. It supports digital RPM adjustment up to 9000 rpm, LCD backlit display control, long spark plug testing, and simultaneous comparison of up to five spark plugs for crankshaft engine and motorcycle spark plug checks.

Five-Hole Testing 200-9000 RPM LCD Digital Display Long Spark Plug Support Safety Cover
5Test Holes
200-9000Simulated RPM
110V / 220VInput Voltage
3 YearsMain Unit Warranty
AUTOOL SPT360 digital spark plug tester with five-hole design and 9000 RPM display Click to enlarge
AUTOOL SPT360 five-hole spark plug tester with protective cover and digital control panel Click to enlarge
Before You Order And Use

Before You Order And Use

SPT360 is a high-frequency ignition tester. Review the protective cover, power-off handling, high-voltage warning, storage, and inspection notes before testing spark plugs.

Close The Protective Cover

Close the transparent protective cover before testing. Do not run the spark plug tester with the cover open.

Power Off Before Handling

Do not insert or remove spark plugs while the power supply is connected. Turn off the power first.

High Voltage Warning

During operation, spark plug voltage can reach tens of thousands of volts. Do not touch the spark plugs directly with bare hands.

Use A Safe Environment

Use the tester in a suitable dry environment. Avoid hot, humid, or non-ventilated storage conditions.

Inspect Connections

Regularly check parts that need tightening or connection. Tighten loose parts in time to keep the equipment safe.

Maintain The Circuit

Check the circuit section thoroughly during maintenance and replace aging wires or worn parts when needed.

Care Reminders

  • Do not overload the equipment during testing.
  • Keep safety guards complete and reliable.
  • Avoid rubbing the housing against rough surfaces.
  • Avoid contact with corrosive liquids.
  • Store the product in a dry place when not in use.
Key Features

Key Features

SPT360 is built for fast comparative spark plug checks with five test holes, digital sensing, LCD RPM control, long spark plug support, working condition simulation, and simple plug-and-play operation.

Five-Hole Comparative Testing

Test up to five spark plugs at the same time. Use one standard spark plug and compare the remaining test plugs for clearer performance judgment.

Digital RPM Display

The LCD digital backlit screen displays the simulated speed setting, helping users adjust and observe test conditions more precisely.

200-9000 RPM Simulation

The tester simulates engine speed from 200 to 9000 rpm. Higher frequency produces stronger spark plug intensity for comparison.

Adjustable Test Hole Height

The adjustable hole position height helps the SPT360 support testing of long spark plugs.

Safety Protection Cover

The transparent protective cover helps improve safety and allows users to observe spark behavior during testing.

Simple Operation

Insert the spark plugs, connect power, close the cover, turn on the switch, and adjust the working frequency with the RPM buttons.

Specifications

SPT360 Product Specifications

SPT360 uses digital sensing, AC 110V/220V input power, DC 12V output power, 200-9000 rpm analog speed, and five test hole positions for high-frequency spark plug comparison.

Core Specifications
ProductAUTOOL SPT360 Spark Plug Tester
Working PrincipleDigital sensing
Input PowerAC 110V / 220V ±10%
Output PowerDC 12V ±2V, 1A
Analog / Simulated Speed200-9000 rpm
Test Hole Position5
DisplayLCD digital backlit screen
Adjustable Hole Position HeightSupported
Long Spark Plug TestingSupported
Working Condition SimulationSupported
Safety Protection CoverSupported
Ambient Temperature0°C-45°C
Relative Humidity<85%
Main Unit Warranty3 years for eligible non-human damage cases
AUTOOL SPT360 product structure with five spark plug test holes display RPM buttons power switch and protective cover Click to enlarge
Core Specifications
ProductAUTOOL SPT360 Spark Plug Tester
Working PrincipleDigital sensing
Input PowerAC 110V / 220V ±10%
Output PowerDC 12V ±2V, 1A
Analog / Simulated Speed200-9000 rpm
Test Hole Position5
DisplayLCD digital backlit screen
Adjustable Hole Position HeightSupported
Long Spark Plug TestingSupported
Working Condition SimulationSupported
Safety Protection CoverSupported
Ambient Temperature0°C-45°C
Relative Humidity<85%
Main Unit Warranty3 years for eligible non-human damage cases
How To Use

How To Use

Use the SPT360 by inserting the standard spark plug and test plugs, connecting the power adapter, closing the protective cover, and adjusting the RPM frequency with the control buttons.

Insert Spark Plugs

Insert the standard spark plug into the standard test hole, then insert the spark plugs to be tested into the remaining test holes.

Connect Power

Plug the power adapter into the side power port on the tester. Confirm that the indicator light turns on.

Close The Cover

Close the transparent protective cover before testing to reduce exposure to high-voltage spark activity.

Start And Adjust RPM

Turn on the power switch and press the RPM “+” or “-” buttons to adjust the working frequency.

Compare Spark Performance

Observe the spark intensity of each plug. The higher the frequency, the stronger the spark plug intensity during the simulated test.

Use Notes

  • Turn off the power before inserting or removing any spark plug.
  • Do not touch spark plugs directly during operation.
  • Keep the protective cover closed while testing.
  • Use the standard test hole for the reference spark plug and compare test plugs against it.
  • Use the digital RPM controls to adjust frequency gradually.
Product Comparison

Product Comparison

Compare SPT101, SPT105, SPT301, and SPT360 before choosing the right test hole quantity, RPM range, LCD display, adjustable height support, and long spark plug compatibility.

SPT101Two test holes, 0-6000 rpm, safety cover, adjustable simulated RPM, no LCD digital backlit screen, and no long spark plug support.
SPT105Two test holes, 0-6000 rpm, adjustable hole position height, safety cover, adjustable simulated RPM, and support for long spark plugs.
SPT301Three test holes, 200-9000 rpm, LCD digital backlit screen, adjustable hole position height, safety cover, and long spark plug support.
SPT360Five test holes, 200-9000 rpm, LCD digital backlit screen, adjustable hole position height, safety cover, and long spark plug support.
Decision CheckChoose SPT360 if you need the highest comparison capacity in this group and want to test up to five spark plugs at the same time.
AUTOOL spark plug tester model comparison chart Click to enlarge
Related Products

Related Products

Review related AUTOOL spark plug testers before choosing the right number of test holes, RPM range, display type, and long spark plug support.

Manual And Downloads

Manual And Downloads

Download the SPT360 user manual for cautions, product structure, technical specifications, operating instructions, maintenance guidance, warranty access, and return or exchange service information.

AUTOOL SPT360 spark plug tester user manual preview Click to enlarge

AUTOOL SPT360 User Manual

Open the PDF manual for setup, operation, safety warnings, maintenance, warranty, and service policy details.

Download Manual

Need Setup Confirmation?

Contact AUTOOL Store before ordering if you need to confirm spark plug compatibility, long spark plug testing, voltage version, RPM adjustment, safety use, package contents, or model selection.

Questions And Answers

These answers cover SPT360 spark plug tester capacity, RPM range, long spark plug support, power input, operation, safety, model selection, package confirmation, and warranty support.

Warranty And Contact

Warranty And Contact

For SPT360 model selection, spark plug compatibility, long spark plug testing, RPM adjustment, voltage version confirmation, package contents, safety use, manual support, or after-sales service, contact AUTOOL Store directly.

Pre-Sales And Product Support

Use support if you need help confirming whether SPT360 is the right spark plug tester for your workshop, whether you need a two-hole, three-hole, or five-hole model, or how to safely compare old and new spark plugs.

  • SPT101 / SPT105 / SPT301 / SPT360 model selection
  • Five-hole comparative testing explanation
  • Long spark plug and adjustable height confirmation
  • 110V / 220V voltage version confirmation
  • RPM adjustment and LCD display setup support
  • Package contents and accessory confirmation
  • High-voltage safety and protective cover reminders
  • 3-year main unit warranty support for eligible non-human damage cases

Reviews

There are no reviews yet.

Leave A Review

Your email address will not be published. Required fields are marked *

AUTOOL SPT360 Spark Plug Tester Automotive Diagnostic
AUTOOL SPT360 Spark Plug Tester Automotive Diagnostic

US$59.00

Select options This product has multiple variants. The options may be chosen on the product page Official Quote Request