AUTOOL 60cm Braided OBD2 Extension Cable
US$20.00
- 60 cm 16-Pin Extension
- Flexible Goose-Neck Access
- Braided Pure-Copper Build
- 60 cm 16-Pin Extension: Extend a standard 16-pin OBD2 connection by 600 mm through a passive male-to-female cable.
- Flexible Goose-Neck Access: Bend the cable body to bring a low or hidden port closer to hand.
- Braided Pure-Copper Build: Combine pure-copper conductors with flexible insulation and a thickened nylon braided sleeve.
- 60 cm 16-Pin Extension: Extend a standard 16-pin OBD2 connection by 600 mm through a passive male-to-female cable.
- Flexible Goose-Neck Access: Bend the cable body to bring a low or hidden port closer to hand.
- Braided Pure-Copper Build: Combine pure-copper conductors with flexible insulation and a thickened nylon braided sleeve.
- 3-Year Warranty Main unit 3 years · Accessories 1 year
- 90-Day Returns Eligible returns within 90 days
- Official Store Genuine products · Direct support
AUTOOL OBD2 Cable · 60 cm Braided Goose-Neck Extension
Bring a Hidden Port Closer to Hand
Bring a low or hidden 16-pin vehicle port 60 cm closer to hand with a flexible braided copper-core extension. Its passive male-to-female path adds positioning reach and a replaceable connection point.
- 60 cm Working Reach
- 16-Pin Male-to-Female Route
- Braided Wear Protection
- Single-Cable Package
- Passive Signal Path
Key Features
Position the Goose-Neck Cable with Added Reach
Flexible Goose-Neck Design
The bendable cable body helps bring low-position or hidden OBD2 ports closer to your hand, reducing the need to bend down repeatedly when connecting diagnostic tools.
Pure Copper Core
The internal high-quality pure copper core helps maintain stable data transmission and reliable diagnostic-tool communication during daily use.
Protective Nylon Braided Sleeve
The outside cable is covered with a thickened nylon braided sleeve to improve abrasion resistance, flexibility, pull resistance, and long-term durability.
Flexible Insulated Outer Material
The outer layer uses flexible insulated plastic material for a soft touch, easier bending, and better protection during repeated connection and storage.
OBD-16 Port Structure
The male-to-female connector is designed for standard OBD-16 diagnostic interfaces and tools with a 16-pin OBD2 socket.
Male Connector Width
Male connector width: 40 mm.
8 Inspection Steps
From injection to molding, the cable goes through multiple inspection steps and is designed for more than 10,000 plug-in cycles under proper use.
Easier Access from the Driver’s Seat
The bendable extension brings low or hidden diagnostic ports closer to hand, reducing repeated reaching under the dashboard.
60 cm Extension Length
The 600mm extension provides additional room to position diagnostic equipment inside the vehicle.
Passive OBD2 Extension Cable
Routes the existing 16-pin male-to-female connection to the stated length so the scanner or accessory can be positioned more conveniently; available functions still depend on the vehicle, pinout, connected hardware, software, and protocol support.
Connection and Fit Notes
Do not route the cable near hot components, sharp edges, or moving parts. Store it loosely after use to protect the braided sleeve and connectors.
Cable Weight
Net weight: 205g.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
How to Use
Connect, Route and Check Communication
Confirm The Vehicle Port
Identify the exact vehicle connector, year, and pinout; inspect it for damage.
Confirm The Tool Chain
Verify the scanner, software, protocol, module, task, and any authorization independently of the cable.
Connect Safely
Follow the vehicle and tool procedure, align connectors correctly, and never force a mismatched plug.
Route Without Strain
Position the cable away from pedals, sharp edges, heat, moving parts, and pinched trim.
Verify Communication
Run the intended read-only connection check first. If communication changes, remove added devices or the extension and compare direct connection.
Safety & Compatibility
Check Pin Fit, Routing and Power Limits
Passive Hardware
Extends the physical OBD2 connection while the connected scanner provides diagnostic functions.
Pinout And Fit
Match the connector and pinout to the vehicle port and diagnostic tool before connection.
Vehicle Movement
Keep all cable and device parts clear of pedals, steering, seat tracks, doors, and driving controls.
Electrical Load
Do not attach unknown or high-current devices to vehicle diagnostic power. Follow the vehicle and tool current limits.
Disconnect If Unstable
If a tool drops connection, overheats, resets, or changes vehicle behavior, stop and return to a known direct connection.
Specifications
Confirm Interface, Length and Quantity
| Specification | Value |
|---|---|
| Length | 60 cm |
| Connector Route | 16-pin male → 16-pin female |
| Package Quantity | 1 cable |
| Function | Passive physical extension / pin routing; no protocol conversion |
Manual & Support
Confirm Port, Pinout and Tool Fit
Manual Download Center
Visit the manual download center for connected-tool guidance, then confirm 16-pin fit, 60-centimeter positioning and signal compatibility, with safe-use and troubleshooting guidance.
Package Contents
One Braided OBDII Extension Cable
- Included Cable1 cable; 60 cm; 16-pin male → 16-pin female.
- Not IncludedDiagnostic scanner, software, licenses, vehicle, and unlisted adapters are not included.
- Included ComponentsPackagingRetail package box
FAQs
Braided OBDII Extension Fit and Function Questions
Is This AUTOOL Cable A Diagnostic Scanner?
No. This 16-pin male-to-female cable extends a compatible OBD2 connection. Use it with a scanner that supports the vehicle and required function.
What Vehicles Can Use This OBD2 Extension Cable?
It is suitable for vehicles equipped with a standard OBD2 16-pin diagnostic interface. Before ordering, check that your vehicle port is a standard OBD2 16-pin port and that there is enough space around the connector.
What Diagnostic Tools Can It Work With?
It can work with diagnostic tools that use a 16-pin OBD2 socket, such as common OBD2 scanners, Launch Easydiag-type adapters, THINKDIAG-type adapters, THINKDRIVER-type adapters, and ELM327-type tools, depending on the physical connector fit.
How Long Is The Cable?
The cable length is 60cm / 600mm / 23.62in. This length helps extend hidden or low-position OBD2 ports while keeping the cable compact for storage and daily diagnostic use.
What Materials Are Used In The Cable?
The cable uses a high-quality pure copper core for stable transmission, a flexible insulated outer layer, and a thickened nylon braided sleeve for flexibility, pull resistance, abrasion resistance, and durability.
Can It Convert A Non-OBD2 Port To OBD2?
No. This is a male-to-female OBD2 extension cable only. It does not convert non-OBD2 diagnostic ports unless you use the correct separate adapter for your vehicle and diagnostic tool.
What Is Included In The Package?
The package includes 1 × AUTOOL 60cm OBD2 II 16-pin enhanced flexible male-to-female extension cable. Diagnostic scanners, Bluetooth OBD2 adapters, and other conversion adapters are not included.
Does This Cable Add Diagnostic Functions?
No. It only changes physical reach, routing, and connector shape. Available functions depend on the vehicle, pinout, scanner, software, protocol, and authorization.
No reviews yetBe the first to share your experience with this product.