LANGUAGE & CURRENCY
AUTOOL WD616 Walnut Shell Blasting Machine
US$539.00
Key Features
- Walnut Blast + Powered Recovery
- 30 L Mobile Body
- Five Adapter Sizes
- 110 V / 220 V Versions
- Walnut Blast + Powered Recovery: External air drives approved new walnut abrasive while the built-in 1000 W suction and filter path collect media and loosened deposits.
- 30 L Mobile Body: The 30 L recovery body supports workshop handling of abrasive and collected residue.
- Five Adapter Sizes: Use five adapter sizes to match and seal selected intake-port shapes for the specific engine.
- 110 V / 220 V Versions: Choose the 110 V or 220 V regional version for the intended power supply.
- 3-Year Warranty Main unit 3 years · Accessories 1 year
- 90-Day Returns Eligible returns within 90 days
- Official Store Genuine products · Direct support
AUTOOL WD616 · 30 L Walnut Blaster with Powered Recovery
Blast and Recover Intake Deposits with Five Adapters
Remove supported intake deposits with external-air walnut blasting and built-in suction and filtration for media and residue recovery. A 30 L body and five intake-adapter sizes support workshop use, with the adapter matched and sealed to the exact engine port. Choose the 110 V or 220 V version for the site, and supply a suitable external compressor and approved new walnut media.
- 30 L Recovery Body
- 5 Intake-Adapter Sizes
- Integrated Suction & Filtration
- 110 V / 220 V Versions
- Air Purge for Feed-Path Clearing
Key Features
A 30 L Mobile Body with 1000 W Suction
Walnut Blasting with Recovery
External air drives walnut abrasive while the built-in suction/filter path collects media and residue.
Five Intake Adapters
Select the profile that matches and seals the exact engine port.
Thirty-Litre Body
The 30 L abrasive/recovery volume supports workshop handling.
Short Anti-Clog Purge
Use about 10 seconds of air before and after operation to help clear the feed path.
110 V / 220 V Versions
Choose the correct regional unit and confirm nameplate/grounding before connection.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
How to Use
Choose Voltage, Match the Port, Blast, and Recover
Step progress1 / 6
01
Confirm Vehicle, Air and Power
Verify approved target, adapter, compressor requirements and the selected 110 V or 220 V unit.
02
Connect Gun and Recovery Hose
Secure the gun, nozzle and suction path.
03
Choose and Seal the Adapter
Match the exact port; close the target intake valve and isolate unintended openings.
04
Load Approved Walnut Media
Load at least 2 kg of new, unopened walnut media approved for WD616.
05
Purge, Blast and Recover
Use the instructed short air purge, clean one supported port and maintain recovery.
06
Final Recovery and Check
Remove visible media, inspect, reassemble and complete vehicle leak/diagnostic/functional checks.
Safety & Compatibility
Confirm Compressor Output, Media, Voltage, and Seal
Professional and Vehicle-Specific Use
Follow the WD616 manual, vehicle specifications and trained-person requirements.
Compressor Facts Required
External air is required; obtain the exact pressure and dynamic flow requirement before ordering.
Fresh Approved Media
The current manual instructs users to add brand-new unopened walnut sand; do not advertise routine reuse.
Valve, Seal and PPE
Close the target valve, seal the adapter, isolate paths and use goggles/gloves/respiratory protection and ventilation.
Residual and Waste Handling
Recover and inspect before startup; handle used/recovered media according to the manual and local requirements.
Compare Models
Compare Adapter Count, Capacity, and Recovery
Model Guide
Choose one or more models. WD616 is selected by default.
1 model selected
No model is selected. Choose a model to compare.
| Choose For Your Task | WD616 | WD716 | WD816 |
|---|---|---|---|
| Capacity & Power | |||
| Adapters | 5 | 23 | 23 |
| Main/Storage Capacity | 30 L | 10 L | 10 L |
| Power | 1000 W | 1000 W (110 V) / 1400 W (220 V) | 1000 W (110 V) / 1400 W (220 V) |
| Equipment & Air | |||
| Extended Blasting Tubes | Not stated | Not stated | 8 |
| Required Air Supply | Confirm | Confirm | >0.7 MPa / >0.4 m³/min |
Manual & Downloads
Use the Manual for the Compatible Machine
AUTOOL WD616 User Manual
Open the PDF manual for WD616 walnut blasting, intake-adapter selection, powered recovery, compressor and voltage setup, operating safety, maintenance, and troubleshooting.
Package
What’s Included
- WD616 Main Unit1000 W walnut blasting machine with powered recovery and a 30 L body.
- Five Adapter SizesFive sizes are described; confirm exact shapes and quantities in the packing list.
- Gun and Recovery HoseRequired for operation; confirm the exact shipped pieces.
- Compressor and Walnut MediaRequired separately unless the selected order explicitly includes them.
- Final Packing ListConfirm every accessory and quantity for the selected shipment.
FAQs
Compressor, Voltage, and Media Questions
What does WD616 clean?
WD616 uses walnut blasting to clean supported intake-system areas and intake-valve carbon deposits under the exact vehicle procedure; it is not a universal full-engine cleaner.
How many adapters are included?
WD616 uses five adapter sizes; confirm the current packing list and exact fit.
How much walnut media is loaded?
Load at least 2 kg of approved new, unopened media.
Can recovered media always be reused?
No. The current WD616 manual instructs new, unopened walnut sand and governs use over general marketing.
What compressor is required?
External compressed air is required. Confirm the pressure and dynamic flow before ordering.
Which voltage should I order?
Choose the 110 V or 220 V version that matches the site and confirm the nameplate and grounding.
Customer Reviews
Leave A Review
No reviews yetBe the first to share your experience with this product.