Repair testing / 8 sub-categories
Automotive Repair & Testing Equipment
Diagnostic tools for leak tracing, visual inspection, battery health, circuits, pressure, spark, oil, and electrical readings.
Repair maintenance / 6 sub-categories
Automotive Repair & Maintenance Equipment
Service equipment for fluid exchange, A/C diagnostics, refrigerant recovery, oil handling, and cooling-system work.
Carbon cleaning / 3 sub-categories
Carbon Deposit Cleaning Equipment
Carbon-removal equipment for injectors, intake valves, components, and workshop cleaning jobs.
Wheel tire / 3 sub-categories
Wheel and Tire Repair Equipment
Equipment for alignment, lifting, tire repair, tire mounting, and service-bay workflows.
Tool storage / 1 sub-category
Workshop Tool Storage Series
Storage products for keeping workshop tools, test equipment, and accessories organized.
EV charging / 1 sub-category
Electric Vehicle Charger Series
EV charging products for new-energy vehicle service, workshop use, and installation scenarios.
OBD diagnosis / 4 sub-categories
OBD Diagnostic Tools
OBD-related testers, cable products, used-car inspection tools, and key frequency diagnostics.
Accessories / 8 sub-categories
Accessories
Replacement parts, adapters, consumables, cables, and add-ons for major diagnostic and service equipment.
Doris –
Easy to used.
fabian –
Buen producto buenas terminaciones espero probarlo pronto
tectouch4752012 –
Love it very good quality product
mikesmarinellc –
easy to use
paul boyd –
Works great! Have already tested over 50 injectors
Stefan –
I am very like with the product.
It was listed as new but its used,
slimjimsix66 –
nice sweet!
Airelle –
It took some figuring out what does what. The four injectors I have are pretty big for street applications so the system has a hard time building any pressure over idle setting. I wish it would come with fluid recommendations. All so found out the ultrasonic bath is heated nothing I read about it said it did. Overall it gets the job done.
Ryan –
Works as should. Easy to set up.
Alair –
easy use
Cindy –
very easy to use
KELLY.C –
Product is good quality
Jacques Thompson –
Purchase is very satisfied Nowhere does nothing flow Seller recommend The order was sent quickly, but disappointed by the overrides
Alison Swaniawski –
The package arrived in excellent condition.
Rich –
Bought this in November and was really happy when I bought it. Today I went to use it and thought the pump was bad. Wasn¡¯t building any pressure. Went to read the instructions and I had to press the up button a few times to get it where it was building pressure. I think this is what people may have issues but is user error and not the machine. It comes with a Bosch pressure pump from factory.
Sparky –
I always kept my old injectors and with this tester I was able to reclaim 15 fuel injectors. I was able to clean them up and check the flow meaning I could also flow match them.Some injectors were clogged beyond repair but the 15 I did save more then paid for the cleaner tester machine.I can definitely recommend this Fuel injector Cleaner-tester.
Richard Sporer –
The package is complete
Raleigh Bruen –
It did not come very quickly. packed well .. i will check the feedback
Ken Snow –
Just what was needed
Penny –
well!
Ollie –
Perfect
Marcelo Harvey –
Very surprised
Ken Crosley –
Example: the quality vs time of fluid delivery by the injector changes depending on which position on the manifold it is placed. Totally useless for comparing injectors performance or fuel delivery vs time… like it was designed to do.Injector adapters are cut too long and go too deep into header causing pressure drop. I put a picture of the inside of the header where you can see the adapter threads extend too deep into the header. The LED lights are positioned to shine directly into your eyes. I had to block the LEDs with a piece of card board. Workmanship and quality of materials is very good.
Felicia Fritsch –
Great service
Elnora Dibbert –
very good
Earl Mante –
It works
Felicia Fritsch –
Thank you very much.
Franklin Jr –
I was very pleased how the system works! It¡¯s also easy to use. However, the instruction book could use more detail. I really like how I can test the injectors through a variety of speeds.
Elnora Dibbert –
Thank you
Editha –
This machine leaked fluid as fast as it used it.
Earl Mante –
very quickly!
JEAN –
High quality price. Do this work
Alasdair –
Buena calidad Precio. Hace el trabajo
Jason Smith –
Tested, cleaned, and re-tested 4 sets of injectors I had laying around as soon as it arrived and I am impressed at how well it works. Found one dead injector and several that needed cleaning badly.
This tool will be a great asset in my shop. It had trouble with the flow test on a set of old low impedance injectors, in fact it can’t do it. It just shuts off immediately, which is good news because this means it has internal over current protection so it won’t damage any injectors. Still not sure what the graduations on the glass cylinders means though, and could use a side-feed adapter.
Helena Brekke –
Really surprised, arrived long before the estimated date,
Albina –
The best cleaning machine
RAUL –
very good deal, time saver
Ashlynn White –
Delivery fast
Ashly Wisoky –
It came quickly
Charlotte –
The machine is very easy to use.
countiesaway –
If you don’t own one then you should buy one!
Hardy Fritsch –
All right
Alyce Nolan –
Great device.
Leon Summers –
This tool is a great concept, and it really works (the first time) if you’re careful. If carb cleaner touches the plastic electrical pin connectors or the front plastic panel, the plastic of these parts will melt. The manual is poorly written. Critical omissions: It doesn’t tell you how to fill the reservoir; It doesn’t describe the process of dumping the vials after the flow test (that’s what the little handle is for, in the center of the vials); And it doesn’t say how to empty the reservoir after the work is completed (you must tip the unit on it’s side to empty the reservoir). Parts of the tool appear to be well-made, while other parts (e.g., the dump valve for the ultrasonic bath and the aforementioned plastic parts) are really cheap or made of the wrong material. 2 or 3 sets of extra pin connectors should have been provided with the unit, plus 2 or 3 plastic front panels, however, the pin connectors can’t be unplugged. I purchased a used Mercedes wiring harness on Ebay to scavenge the injector pin connectors. I’ll try cutting off the Chinese connectors and splicing on the German connectors, which are solvent-resistant. I love how well this machine worked, but I’ve used it only once. I tried to dump all the carb cleaner from the unit, but it remains to be seen if lingering vapors will damage internal seals. Next time I use it, I’ll update this review.
Alameda –
Bought this to help in my shop with fuel injected 4 wheelers.
Alan –
Has worked great cleaning and diagnosing problems, great addiction to any shop
james richardson –
great addiction to any shop
Frederica –
Ultrasonic cleaner and back flushing features are great.
Demi –
Worth every penny!
Christina –
Highly recommend this machine.
Prius hybrid repair shop –
This is the second unit I order. The first last me three days and started leaking . The second one I was filling it when it started to leak. No so happy. I need a machine like that for my shop but very disappointed.
Ainsley –
Cheap way o clean an injector that has sat for years. Works almost to good, lol
Ferench –
Cleaning effect
Nona Wolff –
Everything works
MOLERO –
The product quality is very good.
Sa?a Babi? –
It’s fine
Joey Fields –
Should only be used for cleaning. You do not get any duty cycle information to use for flow testing. Fuel pressure control is extremely poor. Cannot handle low impedance injectors and shuts off when using them. Fluid doesnt come out of the drain port on the back. Sometimes the values on the 2 LCD screens switch places. Injectors flow different amounts depending on which spit they are in. Tons of other issues.
jlame1984 –
It works as described. Had to watch YouTube to figure out functionality.
mike –
I like the ultrasonic cleaning. I like the graduations of the cylinders. I need to use it a few times more to learn its abilities and limitations. Messy when done as solvent leaks out when removing injectors. It can be a bit messy because of that. Not a deal breaker at all though.
Alanna –
I like the ultrasonic cleaning. I like the graduations of the cylinders. I need to use it a few times more to learn its abilities and limitations. Messy when done as solvent leaks out when removing injectors. It can be a bit messy because of that. Not a deal breaker at all though.
Greg Wilson –
I enjoy fixing up older cars with high mileage. It took a GM 3.6L that was sputtering over 4000 RPM back to the full smooth 300HP+ power it had when new.
I’ve tested-cleaned 11 injectors in the 2 months I have had this machine and every one of them dramatically increased their flow rate and got back to a nice atomization cone spray pattern. You get to see the progress from where they start to when you finish, and seeing is believing.
Kristina Zboncak –
Received but not tested yet
Peggie Kilback –
qualitatively
Danny Bell (verified owner) –
Arrived pretty quick. Parts as described & work well
Justus Spinka –
came quickly
Orion Padberg –
Received very quickly
Adela Jenkins –
it works
Jay Fahey –
Very fast delivery
Roberto Dordi (verified owner) –
The photo on the site makes the adapters look different from the original ones. Instead, the product is identical to the one contained in the CT150 injector tester package. The shipment arrived very early and there were no additional costs to pay for taxes or anything else. I will definitely buy from you again
Stipe Loncar (verified owner) –
everything is great and as agreed
Pierre Fau (verified owner) –
Fuel Injector Cleaner & Tester Machine Parts