🔍
OBD2 Breakout Box Protocol Detector Basic Version
Breakout Box Protocol Detector Basic Version
AUTOOL OBD2 Breakout Box Protocol Detector
AUTOOL OBD2 Breakout Box Protocol Detector
AUTOOL OBD2 Breakout Box Protocol Detector
AUTOOL OBD2 Breakout Box Protocol Detector
AUTOOL OBD2 Breakout Box Protocol Detector
AUTOOL OBD2 Breakout Box Protocol Detector
AUTOOL OBD2 Breakout Box Protocol Detector
AUTOOL OBD2 Breakout Box Protocol Detector
  1. OBD2 Breakout Box Protocol Detector Basic Version
  2. Breakout Box Protocol Detector Basic Version
  3. AUTOOL OBD2 Breakout Box Protocol Detector
  4. AUTOOL OBD2 Breakout Box Protocol Detector
  5. AUTOOL OBD2 Breakout Box Protocol Detector
  6. AUTOOL OBD2 Breakout Box Protocol Detector
  7. AUTOOL OBD2 Breakout Box Protocol Detector
  8. AUTOOL OBD2 Breakout Box Protocol Detector
  9. AUTOOL OBD2 Breakout Box Protocol Detector
  10. AUTOOL OBD2 Breakout Box Protocol Detector

AUTOOL OBD2 Breakout Box protocoldetector basisversie

(5 klantbeoordelingen)

US$59.00

Key Features
  • 16-Pin OBD2 Fit
  • Scope Ready
  • 8-30V Supply
Key Features
☰ REQUEST BULK / B2B QUOTERequest B2B Quote
Secure checkoutFast supportBulk ready
AUTOOL OBD2 Breakout Box · Basic Version

Product Overview

The AUTOOL OBD2 Protocol Detector Auto Car Breakout Box Basic Version is an automotive diagnostic connector detector for the OBD2 diagnostic link connector. It gives technicians convenient and safer access to the vehicle OBD2 port, making it easier to monitor protocol signals, power, and ground circuits. When an unconfirmed signal is detected, the breakout box can be connected to a multimeter or oscilloscope for further testing.

OBD2 Breakout Box Protocol Detection Power / Ground Check Multimeter Ready
DC 8-30VWorking Voltage
2.0ALoad
45cmOBD II Cable
3 YearsWarranty
AUTOOL OBD2 Breakout Box Protocol Detector Basic Version main product image Klik om te vergroten
Key Features

Key Features

The Basic Version focuses on essential OBD2 breakout testing: 16-pin access, diagnostic interface connection, multimeter / oscilloscope testing, DC power input, TPU extension cable, and protocol / power / ground signal access.

AUTOOL OBD2 breakout box 16-pin OBD interface and pin definition Klik om te vergroten

16-pin OBD Interface

Compatible with vehicles equipped with an OBD II interface, giving users access to the full 16-pin diagnostic connector and pin definition.

AUTOOL OBD2 breakout box diagnostic instrument interface Klik om te vergroten

Diagnostic Instrument Interface

Allows the diagnostic instrument to communicate through the breakout box while making the OBD II pins easier to access for testing.

AUTOOL OBD2 breakout box built-in 16-pin input jack for multimeter and oscilloscope Klik om te vergroten

Built-in 16-pin Input Jack

The input jack layout simulates the OBD II 16-pin connector and can be connected to a multimeter, oscilloscope, or 4mm banana plug test lead for further signal testing.

AUTOOL OBD2 breakout box DC 8V to 30V power jack Klik om te vergroten

DC 8-30V Power Jack

The DC power jack can connect to an 8-30V power supply, making the breakout box useful for ECU backup power support during battery replacement when the circuit is confirmed safe.

AUTOOL OBD2 breakout box 45cm TPU extension cable Klik om te vergroten

45cm TPU Extension Cable

The OBD II extension cable is made of elastic thermoplastic TPU material for high elasticity, flexibility, and strength.

AUTOOL OBD2 breakout box protocol power and ground detection Klik om te vergroten

Protocol / Power / Ground Detection

Supports protocol signal access, power detection, and ground circuit detection for safer OBD2 diagnostic troubleshooting.

Specificaties

Specificaties

Confirm the diagnostic port, voltage range, load limit, operating temperature, extension cable length, and testing support before use.

Main Specifications
ProductAUTOOL OBD2 Protocol Detector Breakout Box Basic Version
Diagnostic PortOBD II
Working VoltageDC 8V-30V
Load2.0A
Bedrijfstemperatuur-20°C-70°C / -4°F-158°F
OBD II Extension Cable Length45cm
Connector AccessFull analog OBD2 16-pin connector
Testing SupportMultimeter / oscilloscope testing through input jacks
WarrantyThree-year warranty and lifetime maintenance support for eligible non-human damage cases
AUTOOL OBD2 Protocol Detector Basic Version specifications and product dimensions Klik om te vergroten
Product Comparison

Product Comparison

Choose the Basic Version for essential OBD2 breakout testing, the Upgraded Version for voltage display and LED indication, or the Premium Version when wider voltage coverage and 120Ω resistor mode are required.

BasisversieDC 8V-30V working voltage, 2.0A load, 45cm cable, protocol detection, power detection, ground circuit detection, 16-pin OBD interface, and built-in input jack. No OBD voltage display, LED indicator light, power cable, or 120Ω resistor mode.
Geüpgradede versieDC 8V-16V working voltage, 2.0A load, 45cm cable, OBD voltage display, LED indicator light, power cable, protocol / power / ground detection, 16-pin OBD interface, and built-in input jack.
PremiumversieDC 6V-30V working voltage, 2.0A load, 45cm cable, OBD voltage display, LED indicator light, power cable, protocol / power / ground detection, 16-pin OBD interface, built-in input jack, and 120Ω series resistor mode.
BeslissingscheckChoose by voltage range, OBD voltage display, LED indicator, power cable, and 120Ω resistor mode needs.
AUTOOL OBD2 Breakout Box Basic Upgraded Premium comparison chart Klik om te vergroten
Handleiding en downloads

Handleiding en downloads

Download the user manual before using the breakout box, especially if you are not familiar with vehicle data link circuits, OBD2 pin testing, ECU backup power, or multimeter / oscilloscope signal checking.

AUTOOL OBDII Protocol Detector Breakout Box user manual preview Klik om te vergroten

AUTOOL OBD2 Protocol Detector Manual

Open the PDF manual for setup, OBD2 connection, electrical safety, pin testing, and basic operation guidance.

Handleiding downloaden

Need Help Choosing A Version?

Contact AUTOOL Store if you need to confirm Basic / Upgraded / Premium differences, OBD2 pin testing, DC backup power use, multimeter / oscilloscope connection, or safety limitations before ordering.

Emailsupport@autoolstore.com WhatsApp+86 189 2647 7404
Voordat u bestelt en gebruikt

Voordat u bestelt en gebruikt

This product connects directly to the vehicle data link. Use it only when the target circuit, OBD2 pin, and test operation are understood and confirmed safe.

Connect To Vehicle DLC

Connect the breakout box directly to the vehicle OBD2 diagnostic link connector to access the diagnostic communication pins.

Monitor Signal Access

Check protocol, power, and ground access through the 16-pin breakout interface during diagnosis.

Test With Multimeter / Oscilloscope

When an uncertain signal is detected, connect a multimeter or oscilloscope through the input jack for further testing.

Use DC Power Carefully

Use the DC 8-30V jack for ECU backup power only when the vehicle circuit and operation are confirmed safe.

Warm Tips

  • Dit product wordt rechtstreeks aangesloten op de datalink van het voertuig.
  • Onjuist gebruik kan het voertuigdatacommunicatiesysteem, gerelateerde circuits of systemen beschadigen.
  • When you are not sure whether your operation will cause problems, stop using this product immediately.
  • Als u niet zeker bent van het elektrische circuit van de auto, gebruik dan geen jumper om de ingangsaansluiting van dit product kort te sluiten.
  • Gebruik dit product niet om een belastingsapparaat aan te sluiten met een stroomsterkte van meer dan 1 ampère.
  • Sluit de 16e pin, de 4e pin en de 5e pin van dit product niet rechtstreeks kort.
Related Products

Related Products

Related diagnostic tools for OBD2 signal access, multimeter testing, automotive test leads, and ECU backup power support.

AUTOOL OBD2 Protocol Detector Basic Version packing list and accessories Klik om te vergroten
Wat zit er in de doos

Wat zit er in de doos

The packing image shows the OBD2 protocol detector breakout box, color-coded test leads / banana plug leads, and user manual. Packing List is shown with one most relevant package image only.

Main UnitAUTOOL OBD2 Protocol Detector Breakout Box Basic Version
MeetkabelsColor-coded leads / banana plug leads shown in the package image
DocumentatieGebruikershandleiding weergegeven op de verpakkingsafbeelding
Use WithMultimeter, oscilloscope, diagnostic tool, and confirmed-safe DC backup power operation

Vragen en antwoorden

These answers cover OBD2 breakout box use, multimeter / oscilloscope connection, Basic Version limits, working voltage, ECU backup power, short-circuit safety, and Basic / Upgraded / Premium version differences.

Garantie en contact

Garantie en contact

For Basic / Upgraded / Premium version selection, OBD2 pin testing support, multimeter / oscilloscope connection confirmation, DC backup power use, short-circuit safety, or warranty questions, contact AUTOOL Store directly.

Pre-sales en productondersteuning

Use support if you need help confirming OBD2 protocol detector version differences, vehicle DLC testing, safe DC backup power use, multimeter / oscilloscope connection, load limits, pin short-circuit restrictions, or replacement part support.

  • Basic / Upgraded / Premium version selection
  • OBD2 pin testing support
  • Multimeter / oscilloscope connection confirmation
  • DC backup power use confirmation
  • Warm Tips / short-circuit safety confirmation
  • Three-year warranty and lifetime maintenance support for eligible non-human damage cases
Email Supportsupport@autoolstore.com WhatsApp Support+86 189 2647 7404

Customer Reviews

Er zijn nog geen beoordelingen.

Leave A Review

Je e-mailadres wordt niet gepubliceerd. Vereiste velden zijn gemarkeerd met *

OBD2 Breakout Box Protocol Detector Basic Version
AUTOOL OBD2 Breakout Box protocoldetector basisversie

US$59.00

Toevoegen aan winkelwagen Dit product heeft meerdere variaties. Deze optie kan gekozen worden op de productpagina