所有類別

維修測試 / 8 個子類別

汽車維修及測試設備

用於洩漏追蹤、目視檢查、電池健康狀況、電路、壓力、火花、油和電氣讀數的診斷工具。

洩漏追蹤煙霧洩漏偵測器更快找到蒸發排放系統、進氣系統、真空系統、排氣系統和密封系統洩漏。視力檢查智慧鉸接式內視鏡利用可控制攝影機移動，檢查氣壓缸、管道、面板和隱藏空間。電池健康電池系統測試儀檢查電瓶、啟動、充電和供電狀況。電路診斷汽車電路測試儀追蹤電源、接地、連續性、短路和元件啟動故障。液位檢查油液分析儀在進行更深入的診斷之前，先評估油品狀況和污染跡象。壓縮引擎壓力測試儀測量汽缸、燃油、真空和壓力性能。點火測試火星塞測試儀更換前請檢查點火火星情況和火星塞性能。電錶汽車診斷萬用電錶讀取電壓、電阻、電流、頻率和汽車訊號。

維修保養 / 6 個子類別

汽車維修保養設備

用於流體交換、空調診斷、冷媒回收、油處理和冷卻系統維修的維修設備。

ATF服務變速箱油液交換器以可控流量更換自動變速箱油。制動液脈動式煞車油交換器使用脈衝壓力沖洗煞車油，以確保排氣順暢。空調壓力表智慧數位歧管壓力表監測冷媒壓力、真空度、溫度和空調數據。空調恢復製冷劑回收機回收、抽真空並重新充注冷媒，以實現可重複的空調服務。石油處理氣動式排油器和抽油器在維修環境中徹底排出並抽取廢油。冷凍服務冷卻系統測試儀和填充器進行壓力測試、真空填充，並排出滯留空氣。

碳清洗 / 3 個子類別

碳沉積物清洗設備

用於清除噴油嘴、進氣閥、零件和車間清潔工作的積碳設備。

噴油嘴試驗台燃油噴射器清潔劑和測試儀清洗噴油嘴並比較噴霧、流量、洩漏和霧化情況。核桃噴砂核桃砂除碳清潔劑使用核桃砂介質清除進氣閥積碳。乾冰清洗乾冰噴射機有效清除積碳、油脂和污垢，並減少殘留物。

車輪輪胎 / 3 個子類別

車輪和輪胎修理設備

用於四輪定位、舉升、輪胎修理、輪胎安裝和服務車間工作流程的設備。

校準3D車輪定位儀測量定位角度並輔助輪胎磨損校正。海灣起重起重設備用於舉升車輛進行底盤、輪胎、煞車和懸吊系統維修。輪胎服務服務輪胎提供輪胎安裝、平衡、維修和日常輪胎保養服務。

工具收納 / 1 個子類別

工作坊工具收納系列

用於整理車間工具、測試設備和配件的收納產品。

店鋪整理工作坊工具存放將診斷工具和維修設備依區域整理存放。

電動車充電 / 1 個子類別

電動車充電器系列

適用於新能源汽車服務、車間使用和安裝場景的電動車充電產品。

新能源電動汽車充電瀏覽適用於車庫和商店的電動車充電產品。

OBD診斷/5個子類別

OBD診斷工具

OBD 相關測試儀、ECU 編程電源、電纜產品、二手車檢測工具和鑰匙頻率診斷。

二手車檢查二手車診斷測試儀檢查二手車並找出隱藏的系統故障。關鍵訊號汽車鑰匙頻率測試儀檢查遙控鑰匙頻率訊號和鑰匙診斷資訊。連接器電纜OBD電纜尋找車輛介面的診斷電纜和連接器。電纜組OBD線線系列瀏覽 OBD 線材系列，尋找適用的型號、轉接器和安裝方式。程式設計能力ECU編程電源在ECU編程和診斷工作期間，保持車輛電壓穩定。

配件 / 8 個子類別

配件

主要診斷和服務設備的替換零件、適配器、耗材、電纜和附加組件。

對準零件3D車輪定位器配件校準機的目標物、夾具、零件和支撐件。洩漏配件煙霧洩漏偵測器配件煙霧測試所需的轉接器、軟管、蓋子和耗材。相機部件汽車偵測攝影機配件攝影機探頭、鉤子、鏡子、電纜和檢查附件。噴油器部件燃油噴射器清潔劑和測試器配件噴油嘴試驗台的轉接器、管路、密封件及維修零件。核桃部件核桃噴砂機配件核桃除碳清洗用噴嘴、軟管、轉接器和零件。乾冰部件乾冰噴射機配件乾冰噴射所需的噴嘴、管道、接頭和支架。空調部件空調冷媒回收及充填機配件空調設備的軟管、接頭、過濾器、配件和維修零件。電池零件電池測試儀配件電池測試儀的夾鉗、電纜、適配器和附加組件。

🔍

AUTOOL SDT106 汽車煙霧洩漏偵測器

額定 4.82 基於5 140 客戶評級

(140 顧客評價）

US$129.00

主要特色

EVAP / Intake / Exhaust Checks
內置氣泵
Smoke in About 5 Seconds
20°C + Overheat Protection

出貨倉庫

重設

☰ 請求批次/B2B報價

3 年保用期 主機保固 3 年，配件保固 1 年
90日返回 符合條件的退貨可在 90 天內進行
官方店鋪 正品 · 直接支持

AUTOOL SDT106 · Compact Smoke Leak Detector with Built-In Pump

Hang Portable Smoke Testing Close to the Vehicle

Use this compact automotive smoke leak detector for low-pressure smoke checks without a separate shop-air source. Hang it near the test area and trace visible smoke paths. SDT106 starts producing smoke in about five seconds for permitted EVAP, intake, exhaust, fuel-tank, vehicle-sealing, and line-fitting checks, with protection for cold operation and overheating.

內建泵，無需車間氣源
大約5秒鐘的冒煙
Hook-Mounted Test Position
允許的低電壓系統
Cold And Overheat Protection

主要特色

Built-In Pump with an Integrated Work Light

大約5秒鐘後開始冒煙

The detector starts producing smoke quickly after power-on. Allow the test line to fill with smoke, then inspect for escaping smoke to locate leaks.

Low-Pressure Leak Detection

Supports low-pressure checks on EVAP, intake, exhaust, fuel-tank, vehicle-sealing, and common line-fitting areas.

內置氣泵

No extra air pump is required. The built-in air pump lets the unit operate without a separate shop-air supply.

Lightweight Hook Design

The compact body and hook design make it easy to position the unit near the test area, transport it, and store it after use.

Overheat and Low-Temperature Protection

Overheat protection turns off power when the unit exceeds 75°C, and the unit can operate at temperatures down to -20°C.

3年保固支持

主機：三年保固。標準配件：一年保固。保固政策。

如何使用

Add Oil, Connect, Power, Inspect, and Retest

步驟進展1 / 5

添加測試油

For first use, fill 10–15 mL baby oil or liquid paraffin into the detector. Do not overfill.

安全性和相容性

Confirm System Pressure and Keep Ignition Sources Away

12V電源和內置氣泵

使用前請將 SDT106 連接至 12V 直流電池。內建氣泵可提供測試氣流，因此無需外接壓縮機。

Use Visible Smoke Within the Low-Pressure Limit

SDT106 outputs less than 12 psi and less than 5 L/min. Because it has no pressure gauge, flow meter, or flow adjustment, use visible smoke to locate permitted low-pressure leaks and stay within the service limits for the system you are testing.

測試油不包含在內。

Testing oil is not included. Use liquid paraffin or baby oil and add 10–15 mL before first use.

連續使用時間限制為 8 分鐘

Do not run SDT106 continuously for more than 8 minutes. Let the unit rest between test cycles.

75°C Overheat Protection

Automatic overheat protection shuts off power if the internal temperature exceeds 75°C. Let the unit cool before using it again.

Operating Temperature and Hot Surfaces

SDT106 supports operation down to -20°C. The round metal housing can become hot during use, so avoid touching hot surfaces directly.

Follow the Service Limits for the System

Do not introduce smoke into any component or system excluded by the vehicle or component service procedure. SDT106 is for permitted low-pressure smoke testing, not high-pressure system testing.

Use Smoke to Locate the Leak

Use visible smoke to locate the leak area, then repair and retest. If no smoke appears, recheck isolation, flow, and the test setup before continuing.

切勿在運作過程中加油

SDT106 運轉時請勿添加測試油。

No Pressure Gauge Provided

Do not estimate test pressure from the unit because SDT106 has no pressure gauge.

Stay Within Low-Pressure Limits

Keep the test within the low-pressure range allowed by the vehicle or component service procedure.

比較型號

Compare Compact Smoke Testers

相對比 AUTOOL 煙霧洩漏偵測器
產品描述*	SDT50	SDT60	SDT100	SDT101	SDT102	SDT103	SDT106	SDT203	SDT205	SDT205S	SDT206	SDT208
煙霧輸出與防護
工作原理	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒
測試油填充量	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml
額定輸出壓力	＜10psi	＜10psi	＜10psi	3.2千帕（0.46磅/平方英吋）	＜10psi	3.2千帕（0.46磅/平方英吋）	機器額定輸出功率小於 12 psi；請使用目標系統程式。	＜15psi	＜15psi	＜15psi	＜18psi	<10psi/35psi
額定輸出流量	＜5公升/分鐘	＜5公升/分鐘	＜5公升/分鐘	> 10L / min	＞ 6L / min	> 10L / min	＜5公升/分鐘	＜6公升/分鐘	＜6公升/分鐘	＜6公升/分鐘	＜6公升/分鐘	＜15公升/分鐘
高溫保護	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作
響應時間	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧
功率和物理尺寸
輸入功率	DC12V	DC12V	DC12V	DC12V / 5A	DC12V	DC12V / 5A	DC12V	DC12V	DC12V	DC12V	DC12V	DC12V / 24V
額定功率	50W	50W	50W	48W	48W	48W	50W	65W	65W	65W	70W	80W
淨重（主機）	1.5kg	1.6kg	1.6kg	1.6kg	1.6kg	1.15kg	3.5kg	1.7kg	3.2kg	3.2kg	3.5kg	4.2kg
主機尺寸	145mm * 80mm * 200mm	145mm * 80mm * 200mm	180mm * 102mm * 143mm	180mm * 100mm * 135mm	180mm * 102mm * 143mm	180mm * 100mm * 135mm	110mm * 135mm * 210mm	145mm * 80mm * 200mm	295mm * 295mm * 207mm	295mm * 295mm * 207mm	150mm * 150mm * 275mm	350mm * 250mm * 300mm
監控與控制
流量計視窗	×	×	×	×	×	✓	×	✓	×	✓	✓	✓
壓力計	×	✓	×	×	✓	×	×	✓	✓	✓	✓	✓
空氣源類型	內置氣泵	內置氣泵	內置氣泵	外部空氣源	內置氣泵	外部空氣源	內置氣泵	內置氣泵	內置氣泵	內置氣泵	內置2個氣泵	內置氣泵
模式輸出	煙霧模式	煙霧模式	煙霧模式	煙霧模式	煙霧模式	煙霧模式	煙霧模式	煙霧模式	空中模式煙霧模式	空中模式煙霧模式	空中模式煙霧模式	空中模式煙霧模式
雙壓力模式	×	×	×	×	×	×	×	×	×	×	×	標準 35 psi / EVAP 10 psi 機器模式；使用車輛程序。
流量調節旋鈕	×	×	×	×	×	✓	×	✓	×	✓	✓	✓
放油閥	×	×	×	×	×	×	×	×	✓	✓	✓	✓
故障指示燈	×	×	✓	×	✓	×	×	✓	✓	✓	✓	✓
油位計	×	×	×	×	×	×	×	×	×	×	✓	✓

使用者手冊及下載

請參考手冊進行設定和測試壓力

手冊/PDF

AUTOOL SDT106 使用手冊

Open the PDF manual for SDT106 built-in pump operation, portable smoke testing, permitted system checks, test-oil handling, safety, maintenance, and troubleshooting.

快速入門指南

小包裝

產品包括

主機AUTOOL SDT106 煙霧洩漏偵測器
電力電纜12V DC battery clamp cable
煙霧軟管Smoke output hose
適配器Cone adapter, airbag adapter, rubber plugs, and accessories
油瓶Empty testing oil bottle included; testing oil is not included
文档User manual and SDT106 retail box

常見問題

Pump, Light, and Adapter Questions

SDT106 應該使用哪一種測試油？

Use liquid paraffin or baby oil as the testing oil. Testing oil is not included; have liquid paraffin or baby oil ready before use.

我應該添加多少測試油？

For first use, add 10–15 mL testing oil. Do not exceed this range. Only refill when the smoke becomes thin, limit each fill to no more than 15 mL, and pour out the remaining oil before adding fresh oil.

Does SDT106 Need a 12V Battery?

是。該 AUTOOL SDT106 smoke leak detector requires a 12V DC battery connection to operate. Confirm the power supply before starting a test.

How Long Can SDT106 Run Continuously?

Do not run the detector for more than 8 minutes continuously. Let the unit rest between uses.

What Happens If the Unit Gets Too Hot?

If the detector exceeds 75°C, automatic overheat protection turns off the power. Wait for the detector to cool before operating it again.

Which Systems Can the SDT106 EVAP Smoke Machine Test?

For low-pressure exhaust checks, SDT106 can be used as an exhaust leak smoke tester. It also supports EVAP, intake, fuel-tank, vehicle-sealing, and line-fitting areas. Do not introduce smoke into any component or system that the vehicle or component service procedure excludes from smoke testing.

Can I Use SDT106 as a Car Smoke Tester?

Yes. SDT106 supports 12V cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats. It is intended for low-pressure vehicle leak detection.

Can SDT106 Be Used for High-Pressure System Testing?

SDT106 is designed for low-pressure smoke leak detection, with rated output pressure below 12 psi. Do not use it as a high-pressure leak tester.

包含哪些配件？

Check the product listing or your selected package option for the exact items included. The package includes the SDT106 main unit, 12V DC battery clamp cable, smoke hose, cone adapter, airbag adapter, and rubber plugs. It also includes other accessories, an empty oil bottle, user manual, and retail box. Testing oil is not included.

How Does SDT106 Differ from Other AUTOOL Smoke Leak Detectors?

SDT106 is a built-in-pump model with Smoke Mode, 12V DC power, <12 psi output pressure, and <5 L/min output flow.
SDT203 adds a pressure gauge and flow adjustment.
SDT205 and SDT205S support Air Mode and Smoke Mode.
SDT206 uses dual built-in air pumps.
SDT208 supports high pressure and low pressure modes.

What Should I Do If the Smoke Becomes Thin?

Stop operation first. Drain the remaining oil in the detector, then add fresh liquid paraffin or baby oil. Do not add more than 15 mL at one time.

How Long Is the Warranty?