所有類別

維修測試 / 8 個子類別

汽車維修及測試設備

用於洩漏追蹤、目視檢查、電池健康狀況、電路、壓力、火花、油和電氣讀數的診斷工具。

洩漏追蹤煙霧洩漏偵測器更快找到蒸發排放系統、進氣系統、真空系統、排氣系統和密封系統洩漏。視力檢查智慧鉸接式內視鏡利用可控制攝影機移動，檢查氣壓缸、管道、面板和隱藏空間。電池健康電池系統測試儀檢查電瓶、啟動、充電和供電狀況。電路診斷汽車電路測試儀追蹤電源、接地、連續性、短路和元件啟動故障。液位檢查油液分析儀在進行更深入的診斷之前，先評估油品狀況和污染跡象。壓縮引擎壓力測試儀測量汽缸、燃油、真空和壓力性能。點火測試火星塞測試儀更換前請檢查點火火星情況和火星塞性能。電錶汽車診斷萬用電錶讀取電壓、電阻、電流、頻率和汽車訊號。

維修保養 / 6 個子類別

汽車維修保養設備

用於流體交換、空調診斷、冷媒回收、油處理和冷卻系統維修的維修設備。

ATF服務變速箱油液交換器以可控流量更換自動變速箱油。制動液脈動式煞車油交換器使用脈衝壓力沖洗煞車油，以確保排氣順暢。空調壓力表智慧數位歧管壓力表監測冷媒壓力、真空度、溫度和空調數據。空調恢復製冷劑回收機回收、抽真空並重新充注冷媒，以實現可重複的空調服務。石油處理氣動式排油器和抽油器在維修環境中徹底排出並抽取廢油。冷凍服務冷卻系統測試儀和填充器進行壓力測試、真空填充，並排出滯留空氣。

碳清洗 / 3 個子類別

碳沉積物清洗設備

用於清除噴油嘴、進氣閥、零件和車間清潔工作的積碳設備。

噴油嘴試驗台燃油噴射器清潔劑和測試儀清洗噴油嘴並比較噴霧、流量、洩漏和霧化情況。核桃噴砂核桃砂除碳清潔劑使用核桃砂介質清除進氣閥積碳。乾冰清洗乾冰噴射機有效清除積碳、油脂和污垢，並減少殘留物。

車輪輪胎 / 3 個子類別

車輪和輪胎修理設備

用於四輪定位、舉升、輪胎修理、輪胎安裝和服務車間工作流程的設備。

校準3D車輪定位儀測量定位角度並輔助輪胎磨損校正。海灣起重起重設備用於舉升車輛進行底盤、輪胎、煞車和懸吊系統維修。輪胎服務服務輪胎提供輪胎安裝、平衡、維修和日常輪胎保養服務。

工具收納 / 1 個子類別

工作坊工具收納系列

用於整理車間工具、測試設備和配件的收納產品。

店鋪整理工作坊工具存放將診斷工具和維修設備依區域整理存放。

電動車充電 / 1 個子類別

電動車充電器系列

適用於新能源汽車服務、車間使用和安裝場景的電動車充電產品。

新能源電動汽車充電瀏覽適用於車庫和商店的電動車充電產品。

OBD診斷/5個子類別

OBD診斷工具

OBD 相關測試儀、ECU 編程電源、電纜產品、二手車檢測工具和鑰匙頻率診斷。

二手車檢查二手車診斷測試儀檢查二手車並找出隱藏的系統故障。關鍵訊號汽車鑰匙頻率測試儀檢查遙控鑰匙頻率訊號和鑰匙診斷資訊。連接器電纜OBD電纜尋找車輛介面的診斷電纜和連接器。電纜組OBD線線系列瀏覽 OBD 線材系列，尋找適用的型號、轉接器和安裝方式。程式設計能力ECU編程電源在ECU編程和診斷工作期間，保持車輛電壓穩定。

配件 / 8 個子類別

配件

主要診斷和服務設備的替換零件、適配器、耗材、電纜和附加組件。

對準零件3D車輪定位器配件校準機的目標物、夾具、零件和支撐件。洩漏配件煙霧洩漏偵測器配件煙霧測試所需的轉接器、軟管、蓋子和耗材。相機部件汽車偵測攝影機配件攝影機探頭、鉤子、鏡子、電纜和檢查附件。噴油器部件燃油噴射器清潔劑和測試器配件噴油嘴試驗台的轉接器、管路、密封件及維修零件。核桃部件核桃噴砂機配件核桃除碳清洗用噴嘴、軟管、轉接器和零件。乾冰部件乾冰噴射機配件乾冰噴射所需的噴嘴、管道、接頭和支架。空調部件空調冷媒回收及充填機配件空調設備的軟管、接頭、過濾器、配件和維修零件。電池零件電池測試儀配件電池測試儀的夾鉗、電纜、適配器和附加組件。

🔍

AUTOOL SDT206 雙泵汽車煙霧機

額定 4.97 基於5 274 客戶評級

(274 顧客評價）

US$299.00

主要特色

Dual Built-In Air Pumps
Pressure + Adjustable Flow
EVAP + Low-Pressure Systems
Visible Oil Level + Drain

出貨倉庫

重設

☰ 請求批次/B2B報價

3 年保用期 主機保固 3 年，配件保固 1 年
90日返回 符合條件的退貨可在 90 天內進行
官方店鋪 正品 · 直接支持

AUTOOL SDT206 · Dual-Pump Automotive Smoke Leak Detector with Flow Control

Monitor Pressure and Control Flow with Separate Built-In Pumps

Use separate built-in pumps for Air and Smoke modes without an external air source. Watch line pressure and airflow, adjust delivery for the connected permitted low-pressure test, then use smoke to trace the visible path; the oil-level gauge and drain outlet simplify testing-oil checks and excess-oil removal.

Separate Air And Smoke Pumps
Pressure And Flow Feedback
Adjustable Test Delivery
Oil-Level Gauge And Drain
大約5秒鐘的冒煙

主要特色

Dual Built-In Pumps with Pressure and Flow Monitoring

空氣模式和煙霧模式

Independent switches let you use Air Mode for pressure and airflow checks, then switch to Smoke Mode for visual leak location.

Dual Built-In Air Pumps

Two built-in air pumps eliminate the need for an external air source during normal smoke leak testing.

Pressure Gauge Monitoring

Use the pressure gauge to observe line pressure. If pressure keeps dropping, the line may have a leak that requires further inspection.

Airflow Meter

The airflow meter lets you monitor airflow through the connected test line.

流量控制閥

Use the flow control valve to adjust airflow for the connected test line and test setup.

大約5秒鐘後開始冒煙

The unit starts producing smoke quickly. The connected test line can fill in about 30 seconds, depending on system volume.

EVAP and Fuel-Tank Checks

Use the EVAP tool or adapter that matches the vehicle test port, then check the EVAP or fuel-tank system for leaks.

Intake and Exhaust Checks

Use it for low-pressure intake and exhaust leak checks when the test section is sealed and connected with an adapter that matches the opening.

Crankcase and Vehicle-Sealing Checks

Helps locate smoke escape points in crankcase and vehicle sealing checks; do not smoke-test any component that the vehicle or component service procedure excludes.

Low-Pressure Turbo Checks

Can assist with low-pressure turbo system leak checks. Do not use it as a high-pressure boost system tester beyond its rated pressure.

Line-Fitting Adapter Support

The smoke hose, adapters, rubber kits, and airbag adapter help connect the unit to different line openings and fittings.

Visible Oil Level Gauge

The oil level gauge helps you observe the current oil volume.

Oil Outlet

The oil outlet lets you drain excess testing oil when needed.

Handle + Hook Portable Design

The compact body, handle, hook, cone adapter, and airbag adapter make SDT206 easier to carry, position, connect, and store.

Overheat and Low-Temperature Protection

The unit turns off when the temperature exceeds 75°C and supports operation down to -20°C.

3年保固支持

主機：三年保固。標準配件：一年保固。保固政策。

如何使用

Seal, Select Output, Watch Flow, Add Smoke, and Inspect

步驟進展1 / 6

添加測試油

Fill 10–15 mL baby oil or liquid paraffin into the detector before use. Do not add more than 15 mL at one time.

安全性和相容性

Match Output to the Exact System and Procedure

12V Power and Dual Built-In Air Pumps

Connect SDT206 to a 12V DC vehicle battery before use. Two built-in air pumps provide the test airflow, so you do not need an external compressor.

Watch Pressure and Airflow Within Service Limits

SDT206 outputs less than 18 psi and less than 6 L/min. Use the pressure gauge, airflow meter, and flow control valve to watch and adjust the test within the vehicle or component service limits.

Use the Oil-Level Gauge, but Keep the 10–15 mL Fill Limit

Testing oil is not included. Use liquid paraffin or baby oil, add 10–15 mL before use, and use the oil-level gauge to check the current oil volume without overfilling.

連續使用時間限制為 8 分鐘

SDT206 請勿連續運轉超過 8 分鐘。過熱保護裝置會在溫度超過 75°C 時自動斷電。請待設備冷卻後再重新啟動。

Operating Temperature and Hot Surfaces

SDT206 supports operation down to -20°C. The round metal housing can become hot during use, so avoid touching hot surfaces directly.

Use Only for Permitted Low-Pressure Automotive Tests

Use SDT206 for permitted low-pressure automotive leak checks, including low-pressure turbo paths within the stated limits. Do not use it for direct high-pressure A/C pressure testing or high-pressure boost-system testing.

Trace the Leak with Smoke

Use visible smoke to trace the leak area. If no smoke appears, recheck isolation, flow, and the test setup before continuing.

切勿在運作過程中加油

SDT206 運轉時請勿添加測試油。

煙霧測試前的檢查程序

在向系統引入煙霧之前，請先遵循車輛或零件維修程序。

Keep Controls Within Pressure Range

Use the pressure and airflow controls within the permitted test-pressure range.

Cool Before Restarting

Let the unit cool before restarting after overheat protection is triggered.

檢測結果

Read Pressure, Flow, and Smoke Separately

Use Pressure and Flow to Guide Inspection

Use the pressure gauge and airflow meter to assess line pressure and airflow, then guide the next leak-inspection step.

可見煙霧逃逸

檢查該插座是否為故意開口，然後檢查、修復並重新測試該區域。

沒有可見煙霧

在進行功能性診斷或其他測試方法之前，請先確認通道暢通、隔離、閥門狀態和煙霧輸送。

比較型號

Compare Pump Capacity and Monitoring

相對比 AUTOOL 煙霧洩漏偵測器
產品描述*	SDT50	SDT60	SDT100	SDT101	SDT102	SDT103	SDT106	SDT203	SDT205	SDT205S	SDT206	SDT208
煙霧輸出與防護
工作原理	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒	低氧燃燒
測試油填充量	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml	10-15ml
額定輸出壓力	＜10psi	＜10psi	＜10psi	3.2千帕（0.46磅/平方英吋）	＜10psi	3.2千帕（0.46磅/平方英吋）	＜12psi	＜15psi	＜15psi	＜15psi	機器額定輸出功率小於 18 psi；請使用目標系統程式。	<10psi/35psi
額定輸出流量	＜5公升/分鐘	＜5公升/分鐘	＜5公升/分鐘	> 10L / min	＞ 6L / min	> 10L / min	＜5公升/分鐘	＜6公升/分鐘	＜6公升/分鐘	＜6公升/分鐘	＜6公升/分鐘	＜15公升/分鐘
高溫保護	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作	溫度高於75°C時停止工作
響應時間	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧	5秒內產生煙霧
功率和物理尺寸
輸入功率	DC12V	DC12V	DC12V	DC12V / 5A	DC12V	DC12V / 5A	DC12V	DC12V	DC12V	DC12V	DC12V	DC12V / 24V
額定功率	50W	50W	50W	48W	48W	48W	50W	65W	65W	65W	70W	80W
淨重（主機）	1.5kg	1.6kg	1.6kg	1.6kg	1.6kg	1.15kg	3.5kg	1.7kg	3.2kg	3.2kg	3.5kg	4.2kg
主機尺寸	145mm * 80mm * 200mm	145mm * 80mm * 200mm	180mm * 102mm * 143mm	180mm * 100mm * 135mm	180mm * 102mm * 143mm	180mm * 100mm * 135mm	110mm * 135mm * 210mm	145mm * 80mm * 200mm	295mm * 295mm * 207mm	295mm * 295mm * 207mm	150mm * 150mm * 275mm	350mm * 250mm * 300mm
監控與控制
流量計視窗	×	×	×	×	×	✓	×	✓	×	✓	✓	✓
壓力計	×	✓	×	×	✓	×	×	✓	✓	✓	✓	✓
空氣源類型	內置氣泵	內置氣泵	內置氣泵	外部空氣源	內置氣泵	外部空氣源	內置氣泵	內置氣泵	內置氣泵	內置氣泵	內置2個氣泵	內置氣泵
模式輸出	煙霧模式	煙霧模式	煙霧模式	煙霧模式	煙霧模式	煙霧模式	煙霧模式	煙霧模式	空中模式煙霧模式	空中模式煙霧模式	空中模式煙霧模式	空中模式煙霧模式
雙壓力模式	×	×	×	×	×	×	×	×	×	×	×	標準 35 psi / EVAP 10 psi 機器模式；使用車輛程序。
流量調節旋鈕	×	×	×	×	×	✓	×	✓	×	✓	✓	✓
放油閥	×	×	×	×	×	×	×	×	✓	✓	✓	✓
故障指示燈	×	×	✓	×	✓	×	×	✓	✓	✓	✓	✓
油位計	×	×	×	×	×	×	×	×	×	×	✓	✓

使用者手冊及下載

請參考手冊進行設定和測試壓力

手冊/PDF

AUTOOL SDT206 使用手冊

Open the PDF manual for SDT206 dual-pump Air and Smoke modes, pressure and flow control, oil-level care, operating safety, and troubleshooting.

快速入門指南

小包裝

產品包括

主機AUTOOL SDT206 煙霧洩漏偵測器
電力電纜12V battery clamp power cable
煙霧軟管Smoke output hose
適配器Cone adapter, airbag adapter, and rubber adapter set
EVAP AccessoriesEVAP-related connectors, caps, and thin hose
油瓶Empty testing oil bottle included; testing oil is not included
「Hook」掛鉤
文档User manual and SDT206 retail box

常見問題

Pump, Flow, and System Questions

SDT206 應該使用哪一種測試油？

Testing oil is not included. Use dedicated smoke-testing oil if available; otherwise use liquid paraffin or baby oil as specified for this model.

我應該添加多少測試油？

Add 10–15 mL testing oil before use. Do not add more than 15 mL at a time. Refill only when the smoke becomes thin, and drain remaining testing oil before adding fresh testing oil. If too much oil is added accidentally, drain some oil out before operation.

Can SDT206 Detect EVAP Leaks?

Yes. This EVAP smoke machine supports permitted low-pressure leak checks in the EVAP system. Use the EVAP adapter or service tool that matches the vehicle test port.

SDT206可以直接偵測汽車空調系統洩漏嗎？

No. The automotive A/C system operates at about 1.7–3.0 MPa output pressure, while AUTOOL smoke leak detectors generate much lower pressure. SDT206 cannot directly pressure-test the automotive A/C system for leaks. Use smoke only to help inspect an A/C line section after isolating and pressurizing it according to the service procedure.

如何利用煙霧來定位獨立空調管路部分的洩漏點？

First isolate and pressurize the A/C line segment according to the vehicle or A/C service procedure. Then apply smoke near the test section and observe whether escaping airflow disturbs the smoke. If escaping air moves the smoke, inspect that area for a possible leak. This method can help locate a leak in an isolated A/C line section, but it is not a direct high-pressure A/C test.

SDT206 可以測試哪些系統？

SDT206 supports low-pressure leak checks for EVAP, intake, exhaust, crankcase, fuel-tank, vehicle-sealing, turbo, and line-fitting systems. Use an adapter that matches the test opening, and seal the test section before inspection.

SDT206 需要什麼樣的電源？

SDT206 runs on a 12V DC vehicle battery. Connect it to a 12V vehicle battery before operation.

我可以調節SDT206的壓力嗎？

SDT206 uses fixed output below 18 psi. Its airflow meter and flow control valve monitor and adjust airflow; they do not change the pressure mode. If separate Standard and EVAP pressure modes are required, compare SDT208.

What Accessories Are Included with SDT206?

Check the product listing or your selected package option for the exact items included. The package includes the main unit, retail box, 12V power cable, smoke hose, cone adapter, hard rubber kits, airbag adapter, empty oil bottle, and hanging hook. EVAP-related accessories, red caps, the user manual, and other listed accessories are also included. Testing oil is not included.

怎麼辦 AUTOOL 煙霧洩漏偵測器型號有何不同？

SDT206: Two built-in pumps, separate Air/Smoke modes, pressure gauge, flow meter/control, oil drain, fault light, and oil-level gauge.
SDT208 alternative: 35 psi Standard / 10 psi EVAP.

The series also includes external-air EVAP, built-in-pump Smoke, Air/Smoke, and dual-pressure options; compare air source, pressure, flow, modes, and accessories.

SDT206的保固期是多久？