語言和貨幣
AUTOOL 乾冰噴射器扁平噴嘴
價格區間：19.00美元至159.00美元
主要特色
- Flat Spray Pattern
- Photo-Assisted Fit Check
- Flat Spray Pattern: Add a flat blasting pattern to compatible HTS705, HTS708, or HTS709 setups with this separately sold nozzle.
- Photo-Assisted Fit Check: Machine and existing-nozzle photos help verify the required connection before purchase.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL Flat Dry Ice Blasting Nozzle · For HTS705, HTS708, and HTS709
Add a Flat Blast Pattern to Compatible Machines
Add a flat blasting pattern to an AUTOOL HTS705, HTS708 or HTS709 dry ice cleaning setup. This separately sold nozzle provides another pattern option for suitable surfaces and contaminants. Match the existing nozzle connection to the selected part, then test the pattern with the machine settings and surface preparation appropriate to the job.
- Flat Blasting Pattern
- For HTS705 / HTS708 / HTS709
- Separately Sold Nozzle
- Match the Existing Connection
主要特色
Add a Flat Spray Pattern
Flat-Nozzle Option
Provides a flat blasting pattern for a supported dry ice cleaning setup.
Three Named AUTOOL 模型
The listing identifies use with AUTOOL HTS705, HTS708 and HTS709.
Separate Replacement Part
This flat nozzle is sold as a separate component; it is not a complete dry ice machine or a full accessory package.
Support-Assisted Matching
Machine and old-part photos can be used to verify the required connection before purchase.
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
如何使用
Confirm, Install, Test, and Inspect
步驟進展1 / 5
01
Confirm the Machine Model
Verify that the dry ice blaster is an HTS705, HTS708, or HTS709, then identify its current nozzle connection.
02
Confirm the Cleaning Task
Choose a flat pattern only after considering the target material, contaminant and desired surface result.
03
檢查和安裝
Isolate the machine, inspect the threads/connection and install according to the machine manual.
04
Test on a Suitable Area
Begin with the machine’s approved conservative setup and test a small area before widening the pass.
05
使用後檢查
Clear residual dry ice as directed and inspect the nozzle for blockage, wear or damage.
安全性和相容性
Check Fit, Surface, and Blasting Setup
Compatibility Confirmation
Do not assume the flat nozzle fits models beyond HTS705, HTS708 and HTS709.
Set Air and Media Requirements
Set compressed air and dry-ice delivery for the machine, nozzle and target surface.
表面測試
Confirm material, coating, adhesion and cleaning goal; dry ice blasting cannot be guaranteed harmless on every surface.
PPE and Ventilation
Use eye, hearing, hand, and cold protection, and provide adequate ventilation for carbon dioxide (CO₂).
Never Aim at People
High-pressure air and low-temperature dry ice can cause injury.
適配性檢查
Match the Machine, Connection, and Cleaning Task
模型指南
Choose one or more options. AUTOOL Dry Ice Blaster Flat Nozzle is selected by default.
已選擇 1 個模型
未選擇任何型號。請選擇一個型號進行比較。
| 選擇適合您任務的選項 | AUTOOL 乾冰噴射器扁平噴嘴 |
|---|---|
| Fit & Use Checks | |
| 機器型號 | 甄選檢查： HTS705 / HTS708 / HTS709 為何重要： Confirms the named compatibility range |
| 連線設定 | 甄選檢查： Photo and part check 為何重要： Avoids ordering a similar-looking incompatible nozzle |
| 目標面 | 甄選檢查： Test before full pass 建立： Match air pressure, dry-ice feed and machine settings to the target surface |
使用者手冊及下載
Use the Manual for Your Dry Ice Blaster
Dry Ice Machine Manuals & Nozzle Guides
Visit the manual download center to find HTS705, HTS708, or HTS709 host-machine instructions plus nozzle compatibility, fit, installation, safety, and troubleshooting guidance.
小包裝
One Selected Flat Nozzle
- Selected Flat NozzleOne separately sold nozzle or the quantity specified by the selected order option.
- Machine and Operating SuppliesDry ice cleaner, hose, dry ice and external compressor are not included unless explicitly listed in the final option.
常見問題
Flat Nozzle Fit and Use Questions
Which machines are named for this nozzle?
AUTOOL HTS705, HTS708 and HTS709.
Does the listing include a dry ice cleaning machine?
No. It is a separately sold component listing.
Will the flat nozzle fit every AUTOOL dry ice machine?
Compatibility is established for HTS705, HTS708 and HTS709. Confirm the connection before using it elsewhere.
Does a flat nozzle make every surface safe to clean?
No. Material, coating, pressure, airflow, distance and dry ice condition still determine suitability. Test a small approved area first.
What Information Should I Provide To Support?
Please provide your machine model, the part or accessory you need, a clear photo if available, the required quantity, and your previous order information if this is an after-sales or replacement request.
- Send the machine model, photos of the existing nozzle and connection, desired quantity and the intended cleaning task.
是 AUTOOL Dry Ice Blasting Machine Components Sold Separately?
是的。 AUTOOL dry ice blasting machine components and accessories are sold separately. Please confirm the required part before purchasing.
Can I Buy A Complete Accessory Set?
If you need a set, please contact AUTOOL online customer service before ordering. Support can help confirm the set details and reduce the risk of buying the wrong components.
Does A Previous Order Help Match A Replacement Part?
Yes. Send the previous order number or purchase channel with the machine model and part photos to help support match the replacement.
Is The Product Image A Packing List?
No. The image is an accessories purchase reminder for AUTOOL dry ice blasting machines. It is not a final packing list. Please confirm the exact component or set contents with support before purchasing.
我該如何联系 AUTOOL Online Support?
你可以聯繫 AUTOOL Store by email or WhatsApp for dry ice blasting machine accessory confirmation, full set inquiries, and replacement part support.
客戶評價
留言
還沒有評論率先分享您使用此產品的體驗。