語言和貨幣
AUTOOL WD616 核桃殼噴砂機
US$539.00
主要特色
- Walnut Blast + Powered Recovery
- 30 L Mobile Body
- Five Adapter Sizes
- 110 V / 220 V Versions
- Walnut Blast + Powered Recovery: External air drives approved new walnut abrasive while the built-in 1000 W suction and filter path collect media and loosened deposits.
- 30 L Mobile Body: The 30 L recovery body supports workshop handling of abrasive and collected residue.
- Five Adapter Sizes: Use five adapter sizes to match and seal selected intake-port shapes for the specific engine.
- 110 V / 220 V Versions: Choose the 110 V or 220 V regional version for the intended power supply.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL WD616 · 30 L Walnut Blaster with Powered Recovery
Blast and Recover Intake Deposits with Five Adapters
Remove supported intake deposits with external-air walnut blasting and built-in suction and filtration for media and residue recovery. A 30 L body and five intake-adapter sizes support workshop use, with the adapter matched and sealed to the exact engine port. Choose the 110 V or 220 V version for the site, and supply a suitable external compressor and approved new walnut media.
- 30 L Recovery Body
- 5 Intake-Adapter Sizes
- Integrated Suction & Filtration
- 110 V / 220 V Versions
- Air Purge for Feed-Path Clearing
主要特色
A 30 L Mobile Body with 1000 W Suction
Walnut Blasting with Recovery
External air drives walnut abrasive while the built-in suction/filter path collects media and residue.
五個進氣轉接器
Select the profile that matches and seals the exact engine port.
Thirty-Litre Body
The 30 L abrasive/recovery volume supports workshop handling.
Short Anti-Clog Purge
Use about 10 seconds of air before and after operation to help clear the feed path.
110 V / 220 V Versions
Choose the correct regional unit and confirm nameplate/grounding before connection.
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
如何使用
Choose Voltage, Match the Port, Blast, and Recover
步驟進展1 / 6
01
Confirm Vehicle, Air and Power
Verify approved target, adapter, compressor requirements and the selected 110 V or 220 V unit.
02
Connect Gun and Recovery Hose
Secure the gun, nozzle and suction path.
03
Choose and Seal the Adapter
Match the exact port; close the target intake valve and isolate unintended openings.
04
Load Approved Walnut Media
Load at least 2 kg of new, unopened walnut media approved for WD616.
05
Purge, Blast and Recover
Use the instructed short air purge, clean one supported port and maintain recovery.
06
Final Recovery and Check
Remove visible media, inspect, reassemble and complete vehicle leak/diagnostic/functional checks.
安全性和相容性
Confirm Compressor Output, Media, Voltage, and Seal
Professional and Vehicle-Specific Use
Follow the WD616 manual, vehicle specifications and trained-person requirements.
Compressor Facts Required
External air is required; obtain the exact pressure and dynamic flow requirement before ordering.
Fresh Approved Media
The current manual instructs users to add brand-new unopened walnut sand; do not advertise routine reuse.
Valve, Seal and PPE
Close the target valve, seal the adapter, isolate paths and use goggles/gloves/respiratory protection and ventilation.
Residual and Waste Handling
Recover and inspect before startup; handle used/recovered media according to the manual and local requirements.
比較型號
Compare Adapter Count, Capacity, and Recovery
模型指南
Choose one or more models. WD616 is selected by default.
已選擇 1 個模型
未選擇任何型號。請選擇一個型號進行比較。
| 選擇適合您任務的選項 | WD616 | WD716 | WD816 |
|---|---|---|---|
| 容量和功率 | |||
| 適配器 | 5 | 23 | 23 |
| Main/Storage Capacity | 30ł | 10ł | 10ł |
| 電力 | 1000W¯¯ | 1000 W (110 V) / 1400 W (220 V) | 1000 W (110 V) / 1400 W (220 V) |
| Equipment & Air | |||
| Extended Blasting Tubes | 沒有說明 | 沒有說明 | 8 |
| 所需空氣供應 | 確認 | 確認 | >0.7 MPa / >0.4 m³/min |
使用者手冊及下載
Use the Manual for the Compatible Machine
AUTOOL WD616 User Manual
Open the PDF manual for WD616 walnut blasting, intake-adapter selection, powered recovery, compressor and voltage setup, operating safety, maintenance, and troubleshooting.
小包裝
產品包括
- WD616 Main Unit1000 W walnut blasting machine with powered recovery and a 30 L body.
- Five Adapter SizesFive sizes are described; confirm exact shapes and quantities in the packing list.
- Gun and Recovery HoseRequired for operation; confirm the exact shipped pieces.
- Compressor and Walnut MediaRequired separately unless the selected order explicitly includes them.
- Final Packing ListConfirm every accessory and quantity for the selected shipment.
常見問題
Compressor, Voltage, and Media Questions
What does WD616 clean?
WD616 uses walnut blasting to clean supported intake-system areas and intake-valve carbon deposits under the exact vehicle procedure; it is not a universal full-engine cleaner.
How many adapters are included?
WD616 uses five adapter sizes; confirm the current packing list and exact fit.
How much walnut media is loaded?
Load at least 2 kg of approved new, unopened media.
恢復的介質是否總是能再次使用？
No. The current WD616 manual instructs new, unopened walnut sand and governs use over general marketing.
What compressor is required?
External compressed air is required. Confirm the pressure and dynamic flow before ordering.
我應該訂購哪種電壓？
Choose the 110 V or 220 V version that matches the site and confirm the nameplate and grounding.
客戶評價
留言
還沒有評論率先分享您使用此產品的體驗。