所有類別

維修測試 / 8 個子類別

汽車維修及測試設備

用於洩漏追蹤、目視檢查、電池健康狀況、電路、壓力、火花、油和電氣讀數的診斷工具。

洩漏追蹤煙霧洩漏偵測器更快找到蒸發排放系統、進氣系統、真空系統、排氣系統和密封系統洩漏。視力檢查智慧鉸接式內視鏡利用可控制攝影機移動，檢查氣壓缸、管道、面板和隱藏空間。電池健康電池系統測試儀檢查電瓶、啟動、充電和供電狀況。電路診斷汽車電路測試儀追蹤電源、接地、連續性、短路和元件啟動故障。液位檢查油液分析儀在進行更深入的診斷之前，先評估油品狀況和污染跡象。壓縮引擎壓力測試儀測量汽缸、燃油、真空和壓力性能。點火測試火星塞測試儀更換前請檢查點火火星情況和火星塞性能。電錶汽車診斷萬用電錶讀取電壓、電阻、電流、頻率和汽車訊號。

維修保養 / 6 個子類別

汽車維修保養設備

用於流體交換、空調診斷、冷媒回收、油處理和冷卻系統維修的維修設備。

ATF服務變速箱油液交換器以可控流量更換自動變速箱油。制動液脈動式煞車油交換器使用脈衝壓力沖洗煞車油，以確保排氣順暢。空調壓力表智慧數位歧管壓力表監測冷媒壓力、真空度、溫度和空調數據。空調恢復製冷劑回收機回收、抽真空並重新充注冷媒，以實現可重複的空調服務。石油處理氣動式排油器和抽油器在維修環境中徹底排出並抽取廢油。冷凍服務冷卻系統測試儀和填充器進行壓力測試、真空填充，並排出滯留空氣。

碳清洗 / 3 個子類別

碳沉積物清洗設備

用於清除噴油嘴、進氣閥、零件和車間清潔工作的積碳設備。

噴油嘴試驗台燃油噴射器清潔劑和測試儀清洗噴油嘴並比較噴霧、流量、洩漏和霧化情況。核桃噴砂核桃砂除碳清潔劑使用核桃砂介質清除進氣閥積碳。乾冰清洗乾冰噴射機有效清除積碳、油脂和污垢，並減少殘留物。

車輪輪胎 / 3 個子類別

車輪和輪胎修理設備

用於四輪定位、舉升、輪胎修理、輪胎安裝和服務車間工作流程的設備。

校準3D車輪定位儀測量定位角度並輔助輪胎磨損校正。海灣起重起重設備用於舉升車輛進行底盤、輪胎、煞車和懸吊系統維修。輪胎服務服務輪胎提供輪胎安裝、平衡、維修和日常輪胎保養服務。

工具收納 / 1 個子類別

工作坊工具收納系列

用於整理車間工具、測試設備和配件的收納產品。

店鋪整理工作坊工具存放將診斷工具和維修設備依區域整理存放。

電動車充電 / 1 個子類別

電動車充電器系列

適用於新能源汽車服務、車間使用和安裝場景的電動車充電產品。

新能源電動汽車充電瀏覽適用於車庫和商店的電動車充電產品。

OBD診斷/5個子類別

OBD診斷工具

OBD 相關測試儀、ECU 編程電源、電纜產品、二手車檢測工具和鑰匙頻率診斷。

二手車檢查二手車診斷測試儀檢查二手車並找出隱藏的系統故障。關鍵訊號汽車鑰匙頻率測試儀檢查遙控鑰匙頻率訊號和鑰匙診斷資訊。連接器電纜OBD電纜尋找車輛介面的診斷電纜和連接器。電纜組OBD線線系列瀏覽 OBD 線材系列，尋找適用的型號、轉接器和安裝方式。程式設計能力ECU編程電源在ECU編程和診斷工作期間，保持車輛電壓穩定。

配件 / 8 個子類別

配件

主要診斷和服務設備的替換零件、適配器、耗材、電纜和附加組件。

對準零件3D車輪定位器配件校準機的目標物、夾具、零件和支撐件。洩漏配件煙霧洩漏偵測器配件煙霧測試所需的轉接器、軟管、蓋子和耗材。相機部件汽車偵測攝影機配件攝影機探頭、鉤子、鏡子、電纜和檢查附件。噴油器部件燃油噴射器清潔劑和測試器配件噴油嘴試驗台的轉接器、管路、密封件及維修零件。核桃部件核桃噴砂機配件核桃除碳清洗用噴嘴、軟管、轉接器和零件。乾冰部件乾冰噴射機配件乾冰噴射所需的噴嘴、管道、接頭和支架。空調部件空調冷媒回收及充填機配件空調設備的軟管、接頭、過濾器、配件和維修零件。電池零件電池測試儀配件電池測試儀的夾鉗、電纜、適配器和附加組件。

🔍

AUTOOL PT635 數位燃油壓力與溫度表

額定 5.00 基於5 3 客戶評級

(3 顧客評價）

US$259.00

主要特色

Fuel Pressure + Temperature
0–426.6 psi / 0.5% FS Accuracy
31-Adapter Coverage
Max / Min / Average

出貨倉庫

重設

☰ 請求批次/B2B報價

3 年保用期 主機保固 3 年，配件保固 1 年
90日返回 符合條件的退貨可在 90 天內進行
官方店鋪 正品 · 直接支持

AUTOOL PT635 · Fuel Pressure and Temperature Kit

Read Fuel Pressure and Temperature Together

Read fuel pressure and temperature together with this automotive fuel pressure tester at a verified fuel-system test point. PT635 shows live, maximum, minimum, and average pressure with test time, while 31 adapter types support a broad range of compatible connections. Data hold and zero controls help prepare, capture, and compare readings under the specified operating condition.

Fuel Pressure Plus Temperature
Current / Max / Min / Average
31 Adapter Types
Data Hold And Zero
Stated 0.5% FS Accuracy

AUTOOL PT635 high-end fuel pressure gauge kit with 2.8 inch backlit screen and adapter features

主要特色

31-Adapter Automotive Fuel Pressure Gauge Kit

數位壓力測量

Measures fuel pressure across a wide range with values shown to two decimal places for easier reading and comparison.

Fuel Temperature Detection

Displays current fuel temperature so users can monitor pressure and temperature changes during fuel system checks.

2.8吋背光顯示屏

The screen separates pressure, max, min, average, temperature, time, and units into clear display areas for quick reading in dim conditions.

Multi-Unit Switching

Switch pressure units between PSI, bar, and kg/cm². Temperature units can be switched between Celsius and Fahrenheit.

Data Lock, Clear And Zeroing

Lock the display for easier reading, clear data and timing after measurement, and long press to zero pressure before testing.

Riveted Copper Adapters

The included fittings use selected riveted copper material for hardness, wear resistance, and oxidation resistance. The hoses are designed for pressure and fuel system service.

Fuel Line Connection Kit

Multiple fuel line adapters, tees and fuel-resistant hoses support connection to compatible fuel pressure test points.

Battery-Powered Gauge

The gauge uses 6V power from four 1.5V AAA batteries. Install batteries with the correct polarity before operation.

Interface Lock

Press the lock button to lock or unlock the display interface for easier reading during measurement.

Clear And Zero

Click the clear button to clear interface data. Long press to zero pressure before testing.

Unit And Backlight Control

Use the side and front buttons to set pressure units, temperature units, key sound, backlight, and power on or off.

壓力準確度

Accuracy: 0.5% FS.

3年保固支持

主機：三年保固。標準配件：一年保固。保固政策。

服務工作流程

Depressurize, Connect and Record the Test

步驟進展1 / 7

斷開燃油管路

Disassemble the engine fuel pipeline interface according to the vehicle service procedure.

安全使用

Control Fuel, Ignition and Leak Risk

Automotive Fuel System Focus

Use PT635 for standard automotive fuel pressure and temperature checks; select the dedicated gauge for other pressure applications.

Not For GDI High-Pressure Testing

For standard automotive fuel pressure and temperature checks, use PT635. For GDI high-pressure testing, choose PT640.

Choose The Correct Adapter

Select the connector that matches the vehicle fuel line interface before connecting the measuring probe.

Zero Before Testing

Reset the pressure value to zero before measurement so the pressure reading starts from the correct baseline.

AAA Battery Powered

The gauge uses 6V power from four 1.5V AAA batteries. Install batteries with the correct polarity before operation.

Fuel System Safety

Follow the vehicle fuel system service procedure before disconnecting fuel lines. Check each connection for tightness and leakage before starting the engine.

利用結果規劃下次檢查

Depressurize the system, use a rated hose and compatible adapter, and compare pressure and temperature with the vehicle specification at the stated operating condition.

Do Not Exceed Overload Pressure

Do not overload the gauge. The manual lists 40 bar as the overload pressure.

模型比較

選擇合適的壓力測試套件

模型指南

選擇一個或多個型號。預設選擇 PT635。

已選擇 1 個模型

PT610 Cylinder Pressure GaugeCylinder pressure / 10 connectors / 6 recordsPT620 Oil Pressure Gauge KitEngine oil pressure / 18 connectors / 0–29.4 bar rangePT630 Fuel Pressure GaugeFuel pressure / 17 connectors / 0–29.4 bar rangePT635 Fuel Pressure Gauge(High-end version)Fuel pressure / 31 connectors / 0–29.4 bar range當前模型PT640 GDI Fuel Pressure GaugeGDI fuel / 3 connectors / 0–360 bar rangePT650 Transmission Oil Pressure GaugeTransmission pressure / 12 connectors / 0–29.4 bar rangePT660 Brake System Pressure Tester煞車壓力/雙通道/0–210 巴

AUTOOL PT635 Fuel Pressure Gauge(High-end version) is selected. Choose another model for a side-by-side comparison.

相對比 AUTOOL Engine Pressure Testers
產品描述*	PT610 Cylinder Pressure Gauge	PT620 Oil Pressure Gauge Kit	PT630 Fuel Pressure Gauge	PT635 Fuel Pressure Gauge(High-end version)	PT640 GDI Fuel Pressure Gauge	PT650 Transmission Oil Pressure Gauge	PT660 Brake System Pressure Tester
測量與讀數
顯示屏	2.8英寸	2.8英寸	2.8英寸	2.8英寸	2.8英寸	2.8英寸	3英寸
資料存儲	6組數據	×	×	×	×	×	鎖定目前讀數；請檢查目前多記錄儲存規格。
壓力範圍	0-426.6磅/平方英寸 0-30公斤/平方厘米 0-29.4bar	0-426.6磅/平方英寸 0-30公斤/平方厘米 0-29.4bar	0-426.6磅/平方英寸 0-30公斤/平方厘米 0-29.4bar	0-426.6磅/平方英寸 0-30公斤/平方厘米 0-29.4bar	0-5221.3磅/平方英寸 0-367公斤/平方厘米 0-360bar	0-426.6磅/平方英寸 0-30公斤/平方厘米 0-29.4bar	0–210 巴
雙聲道壓力測試	×	×	×	×	×	×	透過 L/R 通道實現兩個煞車位置/卡鉗
資料鎖定/清除/記錄	✓	✓	✓	✓	✓	✓	✓
多參數顯示	Current Temp 測量時間 Real-Time Pressure Value Average Pressure Value Pressure value of each cylinder	測量時間壓力最大壓力最小壓力高頻差動式測試棒	最大值最低值壓力差值測量時間 Real-Time Pressure Value	最大值最低值平均值 Temperature Value 測量時間 Real-Time Pressure Value	最大值最低值壓力差值測量時間 Real-Time Pressure Value	最大值最低值壓力差值測量時間 Real-Time Pressure Value	左右即時壓力、最小壓力、最大壓力和前後壓力差
壓力單位	幽酒吧公斤/平方厘米	幽酒吧公斤/平方厘米	幽酒吧公斤/平方厘米	幽酒吧公斤/平方厘米	幽酒吧公斤/平方厘米	幽酒吧公斤/平方厘米	psi / bar / kg/cm²
連接和應用
配件連接器	10類型	18類型	17類型	31類型	3類型	12類型	檢查所選包裝內容，確認其中包含的適配器類型和數量。
配備工具箱	✓	✓	✓	✓	✓	✓	✓
適用場景	引擎汽缸	Engine Oil Circulation System	汽車燃油系統	汽車燃油系統	Fuel Injection Pump Pressure in the Automotive Direct Injection System	Automotive Transmission Pressure	內部煞車系統液壓；雙位置/卡鉗對比

手冊和支持

尋找手冊和適配器指南

手冊/PDF

AUTOOL PT635 使用手冊

開啟PDF手冊 AUTOOL PT635 fuel-pressure and temperature testing, unit selection, fuel-line adapter setup, data hold, safe connection and troubleshooting support.

快速入門指南

AUTOOL PT635 packing list showing main unit carrying case product box manual fuel hoses adapters and accessories

包裝內容

看看盒子裡裝了什麼

主機AUTOOL PT635 digital fuel pressure gauge with measuring probe
手提箱Storage toolbox
適配器Fuel pressure adapters, connectors, and fittings
軟管Fuel-resistant hoses and transfer hose
文档AUTOOL PT635 user manual / product documentation
小包裝Product box and accessories

買家問題

壓力連結和閱讀問題

什麼是 AUTOOL PT635 Used For?

AUTOOL PT635 is used for automotive fuel system pressure checks and fuel temperature monitoring. It is suitable for users who need to read real-time pressure, maximum pressure, minimum pressure, average pressure, fuel temperature, and measurement time on one digital display.

What Is The Difference Between PT630 And PT635?

Both PT630 and PT635 are for automotive fuel system pressure checks. PT635 is the higher-end option, with broader adapter coverage shown as 31 types in the comparison chart and added fuel temperature monitoring, making it better for users who want more complete fuel system checking capability.

Is PT635 Suitable For GDI High-Pressure Fuel Systems?

PT635 is for standard automotive fuel system pressure checks. If you need to test gasoline direct injection high-pressure fuel pump pressure, compare PT640 instead, because PT640 is the GDI fuel pressure gauge with a much higher pressure range.

What Pressure Range And Units Does PT635 Support?

PT635 displays pressure in PSI, bar, and kg/cm². The product image lists 0-426.6 psi, 0-30 kg/cm², and 0-29.4 bar, while the manual technical specification lists a 0-30 bar range. The display resolution is 0.01.

Does PT635 Measure Fuel Temperature?

Yes. PT635 supports fuel temperature display, and temperature units can be switched between Celsius and Fahrenheit. This helps users observe pressure and temperature changes during fuel system checks.

What Information Is Shown On The Display?

The 2.8-inch display can show current pressure, pressure units, current maximum pressure, current minimum pressure, current average pressure, current temperature, temperature unit, and current measurement time.

Can PT635 Save Test Data?

PT635 supports reading lock, interface lock, and data clearing. Confirm the current storage function with support if multi-record logging is required.

What Battery Does PT635 Use?

PT635 uses 6V operating voltage from four 1.5V AAA batteries. Open the battery cover on the back of the device, insert the batteries with the correct polarity, and close the cover securely before use.

How Do I Start And Zero The PT635?

Long press the power button for more than 2 seconds to start the instrument. Before testing, long press the zero function so the real-time pressure display returns to zero.

What Are The Basic Operation Steps?

Disconnect the engine fuel pipeline interface, connect the correct vehicle adapter to the measuring probe, reset pressure to zero, connect the measuring probe to the engine, start the engine, then read the measured pressure on the gauge.

包含哪些配件？

Package contents: PT635 main unit, carrying case, product box, user manual, measuring probe, fuel hoses, adapters, connectors, and related accessories.

What Should I Check During Maintenance?

Regularly check parts that need tightening and connection. If anything is loose, tighten it in time. Avoid contact with corrosive liquids, do not store the tool in hot, humid, or non-ventilated places, and keep the product dry when not in use.

Will PT635 Turn Off Automatically?

Yes. The manual notes that the device can automatically power off after 5 minutes of inactivity when no pressure is being applied. After measurement, it can also be shut down by long pressing the power button for about 2 seconds under atmospheric pressure.

保固期有多長？