語言和貨幣
優惠促銷
AUTOOL HTS708 Automotive Dry Ice Cleaning Machine
原價為：2,599.00 美元。US$2,299.00目前價格為：2,299.00 美元。
主要特色
- Water- & Solvent-Free Cleaning
- 7.5 kg Dry Ice Tank
- Adjustable Ice Output
- Mobile 3 m Reach
- Water- & Solvent-Free Cleaning: Dry ice cleans suitable surfaces without water or chemical solvents and sublimates after impact, leaving no solid dry ice particles behind.
- 7.5 kg Dry Ice Tank: The 7.5 kg dry ice tank reduces refill frequency during repeated workshop cleaning.
- Adjustable Ice Output: Adjust dry ice delivery to suit a tested cleaning task and surface.
- Mobile 3 m Reach: A pull handle, casters, dedicated connections, and a 3 m hose support movement and reach around the workshop bay.
- External Air + Local Ice: The machine requires a suitable external compressor and locally sourced dry ice; neither is included.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL HTS708 · 7.5 kg Mobile Dry Ice Blaster
Clean Longer Between Dry Ice Refills
Clean suitable automotive and industrial surfaces without water or chemical solvent using this dry ice blaster. The 7.5 kg hopper supports repeated work between refills, while adjustable ice delivery and a 3 m hose help tune output and reach around the bay. Air treatment helps reduce moisture-related clumping. External compressed air and a local dry ice supply are required; loosened contamination still needs collection.
- 7.5 kg Dry Ice Hopper
- 3 m Blasting Hose
- Adjustable Ice Delivery
- Air Treatment for Stable Feed
- No Water or Chemical Solvent
主要特色
A 7.5 kg Hopper with Mobile Workshop Hardware
7.5 kg Workshop Capacity
The 7.5 kg dry ice tank extends cleaning time between refills during repeated workshop use.
Adjustable Dry Ice Delivery
The control panel supports dry ice amount adjustment, allowing the operator to adjust cleaning intensity for different tasks. Set output for the tested cleaning task rather than using one intensity on every surface.
Dry Physical Cleaning
Dry ice blasting removes suitable contamination without water or chemical solvents and sublimates after impact, helping avoid blast-media or chemical residue on cleaned parts.
Mobile Workshop Body
Dedicated air-source and blasting-gun connections, a pull handle, casters, and a 3 m hose support setup, movement, and reach around the workshop bay.
Air Filtration and Dry-Air Setup
Compressed air accelerates dry ice particles through the blasting hose and nozzle toward the surface being cleaned. Air treatment helps reduce moisture-related dry ice clumping and feed interruption.
Automotive and Industrial Cleaning
Use on suitable automotive and industrial surfaces only after confirming material, coating and access.
Residue-Free Media
The dry ice becomes gas after impact, so no dry ice particles remain. Removed dirt or carbon deposits still need to be collected or cleaned away.
Sublimation Expansion
Upon impact, dry ice rapidly sublimates into CO₂ gas and expands in volume, creating a micro-explosion effect that helps lift contaminants.
低溫衝擊
Dry ice at about -78.5°C creates a thermal shock effect that helps make deposits brittle and loosen the bond to the surface.
進氣口連接
The air inlet is a female 1/2 thread with an inner diameter of about 19 mm.
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
如何使用
Connect Air, Load Pellets, Test a Surface, and Clean
步驟進展1 / 7
01
Prepare the Complete System
Confirm compressor, dry air, grounded power, fresh pellets, ventilation, nozzle and PPE.
02
檢查連接
Check hoses, gun, ground and machine before loading dry ice.
03
Purge Condensate
Set ice feed to zero and check the air stream for moisture before loading.
04
Load and Set Output
Use preferred 3 mm pellets, begin conservatively and test a small approved area.
05
Clean and Monitor
Watch delivery/pressure, adjust gradually and collect removed contamination.
06
Clear Remaining Dry Ice
Set output to zero and run the gun for about 30 seconds or as the manual directs.
07
Shut Down and Inspect
Disconnect air/power and inspect the hose, nozzle and separator.
安全性和相容性
Ventilate CO₂ and Verify Air, Power, and Surface
壓縮空氣
The external compressor is not included. Confirm at least 90 psi and dynamic flow, with 1.5 m³/min and a 300 L tank recommended.
Dry Ice and Ventilation
Avoid skin contact, use cold/eye/hearing protection and ventilate for CO₂.
Material and Coating Test
Do not promise no damage to paint, rubber, plastics, labels or aged coatings; test first.
Grounded Power Version
Confirm voltage, plug, phase and protective earth before purchase/use.
Feed-Path Clearing
Use dry air and clear residual pellets to reduce clumping and blockage.
Wear Full Protective Equipment
Wear protective goggles, ear protection, work clothes, gloves, and closed-toe protective shoes when operating the dry ice blaster.
Check Condensate Before Work
Before work, set the ice feed speed to 0 and check whether condensate is blasted out of the nozzle.
Purge Residual Dry Ice
After dry ice blasting, adjust dry ice flow to 0 and run the blasting gun for about 30 seconds to clear dry ice from the tray and tube.
Keep Tank Free of Debris
Keep the dry ice tank clean when adding dry ice. Do not allow foreign objects to fall into the equipment.
CO₂ Ventilation
HTS708 uses solid CO₂ particles. Ensure ventilation during operation.
比較型號
Compare Hopper Capacity and Workshop Setup
模型指南
Choose one or more models. HTS708 is selected by default.
已選擇 1 個模型
未選擇任何型號。請選擇一個型號進行比較。
| 產品名稱 | 高溫超導708 | 高溫超導709 | 高溫超導818 | 高溫超導828 |
|---|---|---|---|---|
| Media, Cleaning & Fit | ||||
| 工作原理 | 乾冰噴射 | 乾冰噴射 | Dry Ice Flushing | Dry Ice Flushing |
| 乾冰容量 | 7.5KG | 7.5KG | 7.5KG | 7.5KG |
| Dry Ice Injection Quantity | 0-3.2公斤/分鐘 | 0-3.2公斤/分鐘 | 0-3.2公斤/分鐘 | 0-3.2公斤/分鐘 |
| Dry Ice Particles | 3×6毫米 | 3×6毫米 | 3 mm pellets | 3 mm pellets |
| Flushing Consumption | 3-5KG | 3-5KG | 3-5KG | 3-5KG |
| 適用車型 | Fuel Vehicles, Hybrid Vehicles, Electric Vehicles | Fuel Vehicles, Hybrid Vehicles, Electric Vehicles | Fuel Vehicles, Hybrid Vehicles, Electric Vehicles | Fuel Vehicles, Hybrid Vehicles, Electric Vehicles |
| Air & Power Requirements | ||||
| 輸入電壓 | 110 / 220V | 110 V or 220 V; select the option that matches the local supply and machine nameplate. | 110 / 220V | 110 / 220V |
| 氣流 | >1~3.0m3/min | >1~2.0m3/min | >1–3 m³/min | >1–2 m³/min |
| 氣源壓力 | 0.3-1.0Mpa | 0.3-1.0Mpa | 0.3-1.0Mpa | 0.3-1.0Mpa |
| 額定功率 | 550W | 1100W | 沒有說明 | 沒有說明 |
| Machine & Controls | ||||
| Compatible Nozzles | 4類型 | 4類型 | 5類型 | 5類型 |
| 淨重 | 60KG | 63KG | 沒有說明 | 沒有說明 |
| 毛重 | 88KG | 90KG | 沒有說明 | 沒有說明 |
| 壓力計 | Single Pressure Gauge | 雙壓力表 | Single pressure gauge | Dual pressure gauges |
| 手柄 | ✓ | ✓ | ✓ | ✓ |
| 內置過濾器 | ✓ | ✓ | ✓ | ✓ |
| Ice Output Knob | ✓ | ✓ | ✓ | ✓ |
| 360° Casters | ✓ | ✓ | ✓ | ✓ |
使用者手冊及下載
HTS708 Manual & Setup Help
AUTOOL HTS708 User Manual
Open the PDF manual for HTS708 dry ice loading, delivery adjustment, air preparation, hose and nozzle setup, operating safety, maintenance, and troubleshooting.
小包裝
產品包括
- HTS708 Main Unit7.5 kg dry ice blasting cleaner.
- Blasting Hose and GunHose and dry ice gun.
- Nozzles, Tubes and ScoopNozzle/tube accessories and metal scoop.
- 保護性能 Gloves, goggles, and earplugs.
- Power/Ground, Fuses and ManualPower/ground accessories, fuses, and manual.
- Dry Ice and CompressorNot included; obtain locally and verify capacity.
常見問題
Dry Ice Supply and Setup Questions
Why choose HTS708 over HTS705?
Its 7.5 kg tank reduces refills compared with HTS705’s 5 kg tank; both still require matching air, ice and task conditions.
什麼是乾冰噴射？
Dry ice blasting, also called dry ice cleaning, is a cleaning and surface preparation method that uses solid CO₂ particles accelerated in a pressurized air stream. The dry ice particles impact the surface and sublimate into CO₂ gas, helping remove dirt and contaminants without water, chemical solvents, or dry ice media residue.
- Use 3 mm pellets as the preferred size. Confirm the nozzle and setup before using anything larger, up to the stated 8 mm limit.
What Compressor Is Recommended For HTS708?
HTS708 requires stable compressed air at 90 PSI or higher. A 1.5 m³/min compressor with a 300 L air tank is recommended. Dehumidification helps prevent dry ice clumping and moisture-related feed problems.
- Check actual dynamic pressure, airflow, and dryness under load.
Does Dry Ice Blasting Leave Residue?
Dry ice sublimates into gas on impact and leaves no solid blast media, while removed dirt, carbon, paint, rust, or other contamination still needs collection.
Can Dry Ice Blasting Remove Paint?
It can remove failing, loose, or weakly bonded paint in some applications, but is not expected to remove strong, well-adhered paint. Results depend on paint and primer adhesion, surface material, pressure, nozzle, and operating conditions; this is not a white-metal or deep-pitting process.
Is dry ice included?
No. Confirm local supply before ordering.
How Does Automotive Dry Ice Blasting Work?
Dry ice blasting works through impact, cold, and expansion. Compressed air accelerates dry ice particles through the nozzle. The low temperature of dry ice helps make contaminants brittle, and the dry ice sublimates on impact, expanding into gas and helping lift contaminants from the surface.
What Do I Need Before Using HTS708?
You need the HTS708 machine, suitable compressed air source, correct power supply, proper grounding, dry ice supply, blasting hose, applicator, nozzles, and protective equipment. Dry ice pellets are not included and should be purchased locally.
What Dry Ice Size Should I Use?
Preferably use 3 mm dry ice pellets. Pellets up to 8 mm may be used when suitable for the nozzle, air supply, cleaning setup, and operating conditions.
How Can I Reduce Dry Ice Blockage Or Clumping?
- Before loading: Use dry air, keep the tank clean, and exclude foreign objects.
- Before blasting: Set ice feed to 0 and check whether condensate exits the nozzle.
- After blasting: Return flow to 0 and run the gun for about 30 seconds to clear remaining dry ice from the tray and tube.
Is Dry Ice Blasting Safe?
Dry ice blasting requires proper precautions. Work in a well-ventilated area, because the machine uses solid CO₂ particles. Wear protective goggles, ear protection, gloves, work clothes, and closed-toe protective shoes. Avoid direct skin contact with dry ice to prevent cold injury.
Where Can I Buy Dry Ice And How Much Does It Cost?
Dry ice is usually purchased from industrial gas suppliers, welding supply companies, or regional dry ice suppliers. Dry ice cost varies by region and supply method. Dry ice pellets are not included with HTS708, so confirm local dry ice availability before ordering the machine.
What Is The Difference Between HTS705, HTS708, And HTS709?
HTS705 is the basic portable model with 5kg dry ice capacity and a lighter 60kg gross package. HTS708 is the standard professional model with 7.5kg dry ice capacity, single pressure gauge, handle, and about 88kg gross weight. HTS709 is the upgraded model with 7.5kg capacity and dual pressure gauges for more precise control.
Can I Customize A Longer Blasting Hose?
The standard blasting hose is 3m. A longer hose may be customized up to 5m with extra cost. Contact AUTOOL Store before ordering if you need a custom hose length.
Can I Return HTS708 After Shipment?
HTS708 is a large machine with relatively high shipping cost and customs cost, so returns may not be supported after shipment. Please contact AUTOOL Store before ordering to confirm voltage, compressor requirement, shipping, tariff, and return policy for your destination.
Can Dry Ice Blasting Remove Rust?
Dry ice blasting can remove loosely adhered rust, surface rust, oxidation, and salt. It cannot remove deeply adhered rust or pitting oxidation, and it is not suitable when a contoured or white-metal finish is required.
客戶評價
留言
馬太福音–
高溫超導708
Absolutely amazing customer service, from the second i bought the blaster i got a message and kept getting updates until it arrived a few days ago. All my questions where answered very quickly and the machine works amazingly
Kfz-Meisterbetrieb Iristi ✓ 已驗證購買 -
Carbon deposit cleaning effect is very good
It takes less than 3 minutes to clean the carbon deposits on the intake valve! In my busy workshop, it saves me a lot of time and allows me to do more things! At first, there was no work, so I thought the machine was broken, but it turned out not to be the case. I didn’t connect the air compressor.
Riley Heel ✓ 已驗證購買 -
Professional Engine Cleaning!
Perfect for everything from engine bays to undercarriage and interior detailing. It runs smoothly, doesn’t clog, and is surprisingly quiet for its power. I’ve been using the AUTOOL HTS708 Dry Ice Blasting Machine for a few weeks now, and I’m honestly impressed. Shipping was fast, the machine came well-packaged, and the customer support has been responsive and helpful. It’s already paid for itself after a few jobs.