所有類別

維修測試 / 8 個子類別

汽車維修及測試設備

用於洩漏追蹤、目視檢查、電池健康狀況、電路、壓力、火花、油和電氣讀數的診斷工具。

洩漏追蹤煙霧洩漏偵測器更快找到蒸發排放系統、進氣系統、真空系統、排氣系統和密封系統洩漏。視力檢查智慧鉸接式內視鏡利用可控制攝影機移動，檢查氣壓缸、管道、面板和隱藏空間。電池健康電池系統測試儀檢查電瓶、啟動、充電和供電狀況。電路診斷汽車電路測試儀追蹤電源、接地、連續性、短路和元件啟動故障。液位檢查油液分析儀在進行更深入的診斷之前，先評估油品狀況和污染跡象。壓縮引擎壓力測試儀測量汽缸、燃油、真空和壓力性能。點火測試火星塞測試儀更換前請檢查點火火星情況和火星塞性能。電錶汽車診斷萬用電錶讀取電壓、電阻、電流、頻率和汽車訊號。

維修保養 / 6 個子類別

汽車維修保養設備

用於流體交換、空調診斷、冷媒回收、油處理和冷卻系統維修的維修設備。

ATF服務變速箱油液交換器以可控流量更換自動變速箱油。制動液脈動式煞車油交換器使用脈衝壓力沖洗煞車油，以確保排氣順暢。空調壓力表智慧數位歧管壓力表監測冷媒壓力、真空度、溫度和空調數據。空調恢復製冷劑回收機回收、抽真空並重新充注冷媒，以實現可重複的空調服務。石油處理氣動式排油器和抽油器在維修環境中徹底排出並抽取廢油。冷凍服務冷卻系統測試儀和填充器進行壓力測試、真空填充，並排出滯留空氣。

碳清洗 / 3 個子類別

碳沉積物清洗設備

用於清除噴油嘴、進氣閥、零件和車間清潔工作的積碳設備。

噴油嘴試驗台燃油噴射器清潔劑和測試儀清洗噴油嘴並比較噴霧、流量、洩漏和霧化情況。核桃噴砂核桃砂除碳清潔劑使用核桃砂介質清除進氣閥積碳。乾冰清洗乾冰噴射機有效清除積碳、油脂和污垢，並減少殘留物。

車輪輪胎 / 3 個子類別

車輪和輪胎修理設備

用於四輪定位、舉升、輪胎修理、輪胎安裝和服務車間工作流程的設備。

校準3D車輪定位儀測量定位角度並輔助輪胎磨損校正。海灣起重起重設備用於舉升車輛進行底盤、輪胎、煞車和懸吊系統維修。輪胎服務服務輪胎提供輪胎安裝、平衡、維修和日常輪胎保養服務。

工具收納 / 1 個子類別

工作坊工具收納系列

用於整理車間工具、測試設備和配件的收納產品。

店鋪整理工作坊工具存放將診斷工具和維修設備依區域整理存放。

電動車充電 / 1 個子類別

電動車充電器系列

適用於新能源汽車服務、車間使用和安裝場景的電動車充電產品。

新能源電動汽車充電瀏覽適用於車庫和商店的電動車充電產品。

OBD診斷/5個子類別

OBD診斷工具

OBD 相關測試儀、ECU 編程電源、電纜產品、二手車檢測工具和鑰匙頻率診斷。

二手車檢查二手車診斷測試儀檢查二手車並找出隱藏的系統故障。關鍵訊號汽車鑰匙頻率測試儀檢查遙控鑰匙頻率訊號和鑰匙診斷資訊。連接器電纜OBD電纜尋找車輛介面的診斷電纜和連接器。電纜組OBD線線系列瀏覽 OBD 線材系列，尋找適用的型號、轉接器和安裝方式。程式設計能力ECU編程電源在ECU編程和診斷工作期間，保持車輛電壓穩定。

配件 / 8 個子類別

配件

主要診斷和服務設備的替換零件、適配器、耗材、電纜和附加組件。

對準零件3D車輪定位器配件校準機的目標物、夾具、零件和支撐件。洩漏配件煙霧洩漏偵測器配件煙霧測試所需的轉接器、軟管、蓋子和耗材。相機部件汽車偵測攝影機配件攝影機探頭、鉤子、鏡子、電纜和檢查附件。噴油器部件燃油噴射器清潔劑和測試器配件噴油嘴試驗台的轉接器、管路、密封件及維修零件。核桃部件核桃噴砂機配件核桃除碳清洗用噴嘴、軟管、轉接器和零件。乾冰部件乾冰噴射機配件乾冰噴射所需的噴嘴、管道、接頭和支架。空調部件空調冷媒回收及充填機配件空調設備的軟管、接頭、過濾器、配件和維修零件。電池零件電池測試儀配件電池測試儀的夾鉗、電纜、適配器和附加組件。

🔍

AUTOOL FN608 8缸燃油噴射器清洗測試儀

US$1,999.00

主要特色

Eight-Injector Comparison
12 V / 12–70 V / 120–180 V Drive
Twin Independent Fuel Pumps
Standalone Heated Cleaner

電壓

出貨倉庫

重設

☰ 請求批次/B2B報價

3 年保用期 主機保固 3 年，配件保固 1 年
90日返回 符合條件的退貨可在 90 天內進行
官方店鋪 正品 · 直接支持

AUTOOL FN608 · Eight-Position Twin-Pump Fuel Injector Test Bench

Compare Eight Injectors Across Twin Independent Rails

Compare up to eight compatible standard gasoline, EFI, FSI and selected GDI injectors at 0–0.8 MPa bench pressure, with two independent pumps feeding separate rails. Select 12 V, 12–70 V or 120–180 V drive and adjust 0–40 ms pulses in 0.1 ms steps for matched spray, leakage and collected-volume checks. A standalone 550 mL, 28 kHz ultrasonic cleaner with heat up to 50°C supports cleaning before retesting.

EFI / FSI / 選定的 GDI
8-Position / Twin-Pump Testing
12 V / 12–70 V / 120–180 V
0–40 ms / 0.1 ms Steps
Standalone Heated Ultrasonic Cleaner

AUTOOL FN608 eight-injector cleaner and tester

主要特色

Eight Positions with Separate Pumps and Test Paths

Eight-Injector Comparison

Run up to eight compatible injectors together in transparent 110 ml cylinders.

Twin Independent Fuel Pumps

Two independent pumps supply separate rails for the eight-position fixture. Stop the machine and inspect it according to the manual if either circuit faults.

Standalone Heated Ultrasonic Unit

Use the standalone 550 ml, 28 kHz cleaner with temperature control to 50 °C.

Extended Injector Drive Ranges

Select 12 V, 12–70 V or 120–180 V drive to match supported standard gasoline, EFI, FSI and selected GDI injector requirements, with the correct connections and procedure.

Advanced Pulse Control

Adjust 0–40 ms PWM in 0.1 ms steps, with up to 7,500 RPM and 9,900 injections.

閉環壓力控制

Set comparative test-fluid pressure from 0 to 0.8 MPa.

Three Cleaning Modes

Use ultrasonic cleaning, suitable top-feed reverse flush or optional-adapter no-disassembly cleaning.

Twelve Test Functions

Cover speed conditions, acceleration, variable speed, sealing, sprayability, injection shape and flow balance.

Eight-Adapter Coverage

Eight adapter groups plus a dedicated BMW adapter group support varied injector connections; verify exact fit and shipment.

GDI Injector Protection

A self-protection function supports compatible GDI test setup.

3年保固支持

主機：三年保固。標準配件：一年保固。保固政策。

如何使用

Identify, Mount, Clean, Test, and Compare Eight Positions

步驟進展1 / 7

Qualify The Injector Set

Record all part numbers and confirm drive range, feed style, adapters, seals and permitted cleaning method.

安全性和相容性

Confirm Injector Type, Drive, Adapter, Fluid, and Pressure

Confirm Drive And Fit

Match every injector’s part number, electrical drive, feed style, adapter and seals before energizing.

Inspect Both Pump Circuits

Do not assume the twin-pump layout makes a failed rail safe; stop and service leaks, abnormal noise or unstable pressure.

液體要分開存放

Use approved cleaning fluid only in the ultrasonic unit and suitable non-corrosive test fluid in the test circuit.

Never Operate The Cleaner Dry

Fill the ultrasonic unit to the manual’s approved level before heating or sonic operation.

Control Vapor And Ignition

Ventilate the work area, wear eye protection and keep fluid away from flames, sparks and hot surfaces.

Depressurize Before Disconnecting

Stop the machine and release pressure before opening either rail, hose or injector fixture.

Use Correct Regional Power

Use the 110 or 220 V ±10%, 50/60 Hz version that matches the supply, with protective grounding.

Compare Results Under the Same Settings

Use the 0.8 MPa bench for matched comparative testing within the stated injector and pressure range; confirm high-pressure GDI performance with suitable equipment.

檢測結果

Read Spray, Leakage, and Volume Across Eight Positions

Check Rail Health First

A shared difference across one rail can indicate a pump, pressure or fixture issue. Compare rail conditions before judging injectors.

Repeat A Single-Position Difference

Reseat the adapter and seal, verify the cylinder and rerun the same settings before treating it as an injector finding.

Compare Spray Shape

Compare spray pattern and atomization across matched injectors under the same settings.

Compare Relative Delivery

Use equal-time cylinder readings for relative group and before/after comparison.

Separate Leakage From Imbalance

Dripping during the specified sealing test and low delivery under a dynamic test are different findings.

Use The Retest And Boundary

Use the 0.8 MPa bench for matched comparative testing within the stated injector and pressure range; confirm high-pressure GDI performance with suitable equipment.

比較型號

Compare Position Count and Pump Configuration

產品描述*	CT150	CT160	CT200	CT400	CT450	CT500	FN602	FN603	FN606	FN608
設定與控制
輸入電壓	110 / 220V	110 / 220V	110 / 220V	110 / 220V	110 / 220V	110 / 220V	110 / 220V	110 / 220V	110 / 220V	110 / 220V
脈衝設定	0-20ms	0-20ms	0-20ms	0-20ms	0-20ms	0-40毫秒，步長0.1毫秒	0–20 毫秒	0–20 毫秒	0–40 ms, 0.1 ms steps	0–40 ms, 0.1 ms steps
時間設定範圍	0-10分鐘	0-10分鐘	0-10分鐘	0-10分鐘	0-10分鐘	0-10分鐘	0-10分鐘	0-10分鐘	0-10分鐘	0-10分鐘
類比轉速範圍	X	X	X	X	X	X	X	X	X	X
支援的電壓設定	固定 12V 驅動；無 12/70/120V 可選模式	固定 12V 驅動；無 12/70/120V 可選模式	固定 12V 驅動；無 12/70/120V 可選模式	12V 70V 120V	12V 70V 120V	12V 70V 120V	12 / 70 / 120 V.	12 / 70 / 120 V.	12 V / 12–70 V / 120–180 V	12 V / 12–70 V / 120–180 V
語言設定	×	×	×	×	×	2 種類型（中文、英文）	×	×	2 種類型（中文、英文）	2 種類型（中文、英文）
壓力表顯示	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
LCD顯示器	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
清潔和流體系統
試管體積	110ml	100ml	110ml	110ml	110ml	110ml	100ml	110ml	110ml	110ml
清洗槽容積	1000ml	2000ml	1700ml	2000ml	2000ml	請確認您訂單所需的油箱容量	2000ml	2000ml	550ml	550ml
超音波清洗能力	70w	70w	70w	70w	70w	70w	70w	70w	70w	70w
內建泵浦	1	1	1	1	1	1	沒有說明	沒有說明	1	2
清潔液加熱	×	✓ （45℃)	×	×	✓ （50℃)	×	✓ （45℃)	✓ （45℃)	✓ （50℃)	✓ （50℃)
測試液位計	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
清洗液回收閥	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
可拆卸清洗槽	×	×	×	×	×	×	✓	×	✓	✓
燃油幫浦數量	1	1	1	1	1	1	沒有說明	沒有說明	1	2
功能和噴油器覆蓋範圍
基本功能	3 Cleaning Functions 9 Testing Functions	3 Cleaning Functions 9 Testing Functions	3 Cleaning Functions 9 Testing Functions	3 Cleaning Functions 9 Testing Functions	3 Cleaning Functions 10 Testing Functions	3 Cleaning Functions 12 Testing Functions	3 Cleaning Functions 10 Testing Functions	3 Cleaning Functions 10 Testing Functions	3 Cleaning Functions 12 Testing Functions	3 Cleaning Functions 12 Testing Functions
適配器連接器	3類型	5類型	3類型	9類型	9類型	9類型	9類型	9類型	9類型	9類型
噴油嘴測試位置	4 燃油噴射器	4 燃油噴射器	6 燃油噴射器	6 燃油噴射器	6 燃油噴射器	6 燃油噴射器	4	6	6	8
燃油噴射器清洗類型	標準燃油噴射器	標準燃油噴射器	標準燃油噴射器	Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors	Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors	Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors	Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors	Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors	Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors	Standard Fuel Injector GDI, EFI, FSI Long Fuel Injectors
支援低阻抗噴油器	僅限相容型號；請確認噴油嘴零件號碼和驅動要求	僅限相容型號；請確認噴油嘴零件號碼和驅動要求	僅限相容型號；請確認噴油嘴零件號碼和驅動要求	僅限相容型號；請確認噴油嘴零件號碼和驅動要求	僅限相容型號；請確認噴油嘴零件號碼和驅動要求	僅限相容型號；請確認噴油嘴零件號碼和驅動要求	僅限相容型號；請確認噴油嘴零件號碼和驅動要求	僅限相容型號；請確認噴油嘴零件號碼和驅動要求	僅限相容型號；請確認噴油嘴零件號碼和驅動要求	僅限相容型號；請確認噴油嘴零件號碼和驅動要求
操作與設備
油擋板設計	×	×	×	×	×	✓	✓	✓	✓	✓
運行工況模擬測試	✓	✓	✓	✓	✓	✓	✓	✓	✓	✓
儲物抽屜	×	×	×	✓	✓	✓	✓	✓	✓	✓
Capacity, Fluid System & Fit
超聲波罐	沒有說明	沒有說明	沒有說明	沒有說明	沒有說明	沒有說明	2,000 ml, 45°C	2,000 ml, 45°C	550 ml, 50°C, standalone	550 ml, 50°C, standalone
系統壓力	沒有說明	沒有說明	沒有說明	沒有說明	沒有說明	沒有說明	0-0.55兆帕	0-0.55兆帕	0-0.8兆帕	0-0.8兆帕
Best task fit	沒有說明	沒有說明	沒有說明	沒有說明	沒有說明	沒有說明	Four-injector heated bench	Six-injector heated bench with drawer	沒有說明	Eight-injector twin-pump throughput

使用者手冊及下載

請參考手冊了解設定和測試模式。

手冊/PDF

AUTOOL FN608 User Manual

Open the PDF manual for FN608 injector cleaning, twin-rail operation, eight-injector tests, drive-range and pulse control, electrical safety, and troubleshooting.

快速入門指南

小包裝

產品包括

FN608 Main UnitEight-position fuel injector cleaner and tester with twin-pump rails.
Standalone Ultrasonic UnitStandalone 550 ml heated ultrasonic cleaning module.
Injector Adapter SetEight adapter groups plus a dedicated BMW adapter group for injector fitment.
Pulse Signal CablesMercedes-Benz, BMW and universal pulse-harness styles, with eight leads per set.
Rails And Fixture HardwareTwo rails, fixture rods, caps and O-rings for the eight-position setup.
Funnel, Power Cord And ManualFilling funnel, mains cable and FN608 user manual.

常見問題

Capacity, Pumps, and Fit Questions

How many injectors can FN608 test together?

Up to eight compatible injectors in eight transparent 110 ml cylinders.

What does the twin-pump design do?

Two independent pumps supply separate rails for the eight-position fixture. Stop the machine and inspect it according to the manual if either circuit faults.

Which drive ranges are available?

12 V, 12–70 V and 120–180 V for compatible injector applications.

Is the ultrasonic injector cleaner standalone?

Yes. The 550 ml unit can operate independently and heats cleaning fluid to 50 °C.

How is FN608 different from FN606?

FN608 adds eight positions and two independent pumps. FN606 has six positions and one pump; their control ranges are otherwise closely aligned.

Can it reverse-flush all injectors?

No. Reverse flushing is for suitable top-feed injectors.

Does no-disassembly cleaning require accessories?

Yes. This additional function requires special adapters.

Can the cylinders certify absolute flow?

Use them for controlled group and before/after comparison unless a calibration and approved limits are available.

Does FN608 reproduce full GDI rail conditions?

Maximum test-fluid pressure is 0.8 MPa for comparative bench testing; use suitable equipment for on-engine high-pressure GDI evaluation.

What should be checked before ordering?

Injector fit, drive range, adapters, seals, fluids, regional power, twin-pump service parts and the full current packing list.

客戶評價

還沒有評論率先分享您使用此產品的體驗。

留言