語言和貨幣
AUTOOL CT200 四缸燃油噴射器清洗測試儀
US$319.00
主要特色
- Six-Injector 12 V Testing
- 3種清潔模式 + 9種測試模式
- 電子壓力控制
- Six-Injector 12 V Testing: Ultrasonically clean compatible standard 12 V gasoline injectors, then low-pressure test up to six at once with backlit tubes for side-by-side spray and collected-volume comparison.
- 3 種清潔模式 + 9 種測試模式： Use three cleaning modes and nine test modes for simulated operation, leakage, spray and volume comparison, and compatible reverse flushing.
- Electronic Pressure Control: Electronic pressure control supports a stable, repeatable setting for compatible low-pressure tests.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL CT200 · Six-Position Injector Cleaner & Tester
Clean and Compare Six Standard Gasoline Injectors
Ultrasonically clean compatible standard 12 V gasoline injectors in the 1,700 mL, 70 W unheated tank, then compare up to six at once for spray appearance, leakage and collected volume under matched low-pressure conditions. Three cleaning modes, nine test modes, electronic pressure control, digital settings and backlit measuring tubes support repeatable clean-test-recheck work, including permitted reverse flushing.
- 四位噴油嘴對比
- 標準12伏汽油噴油嘴
- 3種清潔模式 + 9種測試模式
- 電子壓力控制
- Backlit Spray & Volume Checks
主要特色
Six Test Positions with Graduated Measuring Tubes
Six-Position Injector Test Bench
Use this six-position fuel injector tester to clean and test up to six compatible standard 12 V gasoline injectors, using the graduated tubes for side-by-side spray and collected-volume comparison.
12 噴油嘴清洗和測試功能
Use 3 cleaning modes and 9 test modes covering simulated operating conditions, leakage, spray-pattern and volume comparison, and reverse flushing.
電子壓力控制
Electronic pressure control supports stable, repeatable settings for compatible standard gasoline injector tests. Record the pressure and reuse the same setting for matched retesting.
Digital Parameter Display
The panel shows the selected function, pulse width, test time, and injection count for setup and monitoring.
Backlit Spray and Volume Comparison
This fuel injector testing machine uses backlighting and graduated tubes to make obvious injector spray pattern and collected-volume differences easier to observe across a six-injector set.
Injector Reverse Flushing
Reverse flushing can help remove contamination from compatible top-feed injector designs. Confirm the adapter and injector procedure before use.
Fluid Drain and Recovery
Use the drain function to discharge or recover the appropriate fluid after the supported procedure. Follow the supplied manual for pressure release and restart.
Optional Cleaning Without Removal
Cleaning injectors without removal requires optional accessories and a separate procedure from normal bench testing.
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
如何使用
Identify, Clean, Mount, Test, and Compare
步驟進展1 / 7
01
Identify Injectors and Record the Baseline
Confirm each injector part number, 12 V electrical requirement, adapter and seal fit, and allowed cleaning method. Label all six positions and record pressure, pulse, mode, time, fluid, spray, leakage, and collected-volume baseline.
02
Pre-Clean Injector Exterior
Remove loose exterior contamination with a suitable approved cleaner before loading the ultrasonic tank; do not introduce gasoline or corrosive liquid into the test circuit.
03
Add Ultrasonic Cleaning Fluid
Fill the cleaning tank with the manual-approved ultrasonic liquid and never run it dry.
04
Connect Pulse Signal and Clean
Connect the approved pulse leads and run the selected ultrasonic cleaning procedure to help dislodge deposits, following the injector maker’s material and immersion limits.
05
Install Injectors on the Main Unit
Mount the fuel rail and up to six compatible injectors, close every unused position with approved plugs, verify seals, and add the specified non-corrosive test fluid.
06
Run Injector Tests and Reverse Flushing
Use the required leakage, spray, volume, idle, medium-speed, high-speed, acceleration, variable-speed, and compatible reverse-flush modes while monitoring pressure and setup integrity.
07
Retest, Compare, and Recover Fluid
Repeat the same settings after cleaning, classify improvement, no improvement, or invalid setup, record the next action, and drain or recover fluids through the correct path.
安全性和相容性
Match Injector, Drive, Fluid, Pressure, and Fixture
標準12伏汽油測試範圍
Testing is for compatible standard 12 V gasoline injectors. Verify part number, impedance/current requirements, connector, rail, seals, and adapters before applying a signal or pressure.
GDI and Diesel Limits
CT200 does not test GDI high-pressure or diesel injectors. Diesel ultrasonic cleaning remains conditional on an approved injector-specific liquid and method.
清潔液和測試液分開使用
Use approved ultrasonic cleaning fluid only in the tank and approved colorless, non-corrosive injector test fluid only in the test circuit. Do not mix them or test with cleaning liquid.
Do Not Dry-Run Ultrasonic Cleaning
Add the correct fluid before ultrasonic operation and follow the manual’s fill and immersion limits.
Seal Unused Positions
When testing fewer than six injectors, close every unused rail position with approved plugs; use five plugs for a single-injector setup.
Check Pressure and Fixtures
Confirm pressure stability and inspect the rail, adapters, tubes, and seals for leaks before interpreting a low or uneven reading.
Reverse Flush Only Where Compatible
Use reverse flushing only with the correct top-feed injector design and adapter. Do not infer that every injector can be reverse flushed.
Optional On-Car Procedure
Cleaning without removing injectors requires optional adapters and is a separate procedure from six-position bench testing. Confirm the exact kit and vehicle procedure.
Power, Ventilation, and Waste
Choose the correct regional 110 V or 220 V version, keep liquids away from ignition sources, ventilate the area, monitor operation, and follow the liquid SDS and local waste rules.
檢測結果
Compare Spray, Leakage, and Delivered Volume
關閉時滴水
Contamination, valve-seat wear, or a sealing fault may be present. Verify fixture sealing and pressure, clean and retest, then refer or replace if leakage remains.
一根管子灌裝量少很多
A restriction, installation leak, channel issue, or injector fault may be responsible. Check pressure and seals, swap channels where the procedure allows, and repeat before concluding.
偏轉、分裂、粗糙或滴落的噴霧
Deposits, nozzle damage, or another internal problem may be involved. Clean and repeat under matched conditions; use specialist service if unchanged.
清洗後差異縮小
A recoverable restriction may have been reduced. Record the conditions, renew applicable seals, and verify the result after installation.
沒有可衡量的改善
The injector may already be clean or may have electrical or mechanical damage. Stop repeated cleaning and proceed to further diagnosis, specialist testing, or replacement.
Balanced Set, Vehicle Problem Remains
A balanced set confirms consistent results under the selected bench settings. If the vehicle symptom remains, continue with the applicable vehicle checks.
Invalid or Non-Comparable Result
A leaking adapter, unstable pressure, different fluid, moved channel, or changed pulse/time setting invalidates a direct comparison. Correct the setup and repeat before acting.
Compare Injectors Under the Same Settings
Use CT200 to compare supported 12 V gasoline injectors under the same low-pressure settings; high-pressure GDI, diesel, and calibrated flow testing require suitable equipment.
Electrical Checks May Still Be Required
If an injector still performs inconsistently, check its resistance, wiring, and current draw as required.
比較型號
Choose a Six-Position Injector Bench
模型指南
選擇一個或多個型號。預設選擇 CT200。
已選擇 1 個模型
未選擇任何型號。請選擇一個型號進行比較。
| 產品描述* | CT150 | CT160 | CT200 | CT400 | CT450 | CT500 | FN602 | FN603 | FN606 | FN608 |
|---|---|---|---|---|---|---|---|---|---|---|
| 設定與控制 | ||||||||||
| 輸入電壓 | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V |
| 脈衝設定 | 0-20ms | 0-20ms | 0-20ms | 0-20ms | 0-20ms | 0-40毫秒，步長0.1毫秒 | 0-20ms | 0-20ms | 0-40毫秒，步長0.1毫秒 | 0-40毫秒，步長0.1毫秒 |
| 時間設定範圍 | 0-10分鐘 | 0-10分鐘 | 0-10分鐘 | 0-10分鐘 | 0-10分鐘 | 0-10分鐘 | 0-10分鐘 | 0-10分鐘 | 0-10分鐘 | 0-10分鐘 |
| 類比轉速範圍 | X | X | X | X | X | X | X | X | X | X |
| 支援的電壓設定 | 固定 12V 驅動；無 12/70/120V 可選模式 | 固定 12V 驅動；無 12/70/120V 可選模式 | 固定 12V 驅動；無 12/70/120V 可選模式 | 12V 70V 120V | 12V 70V 120V | 12V 70V 120V | 12V 70V 120V | 12V 70V 120V | 12V 12V-70V 120V-180V | 12V 12V-70V 120V-180V |
| 語言設定 | × | × | × | × | × | 2 種類型（中文、英文） | × | × | 2 種類型（中文、英文） | 2 種類型（中文、英文） |
| 壓力表顯示 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| LCD顯示器 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 清潔和流體系統 | ||||||||||
| 試管體積 | 110ml | 100ml | 110ml | 110ml | 110ml | 110ml | 100ml | 110ml | 110ml | 110ml |
| 清洗槽容積 | 1000ml | 2000ml | 1700ml | 2000ml | 2000ml | 請確認您訂單所需的油箱容量 | 2000ml | 2000ml | 550ml | 550ml |
| 超音波清洗能力 | 70w | 70w | 70w | 70w | 70w | 70w | 70w | 70w | 70w | 70w |
| 內建泵浦 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 |
| 清潔液加熱 | × | ✓ （45℃） | × | × | ✓ （50℃） | × | ✓ （45℃） | ✓ （45℃） | ✓ （50℃） | ✓ （50℃） |
| 測試液位計 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 清洗液回收閥 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 可拆卸清洗槽 | × | × | × | × | × | × | ✓ | × | ✓ | ✓ |
| 燃油幫浦數量 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 |
| 功能和噴油器覆蓋範圍 | ||||||||||
| 基本功能 | 3種清潔功能 9 測試功能 | 3種清潔功能 9 測試功能 | 3種清潔功能 9 測試功能 | 3種清潔功能 9 測試功能 | 3種清潔功能 10 測試功能 | 3種清潔功能 12 測試功能 | 3種清潔功能 10 測試功能 | 3種清潔功能 10 測試功能 | 3種清潔功能 12 測試功能 | 3種清潔功能 12 測試功能 |
| 適配器連接器 | 3類型 | 5類型 | 3類型 | 9類型 | 9類型 | 9類型 | 9類型 | 9類型 | 9類型 | 9類型 |
| 噴油嘴測試位置 | 4 燃油噴射器 | 4 燃油噴射器 | 6 燃油噴射器 | 6 燃油噴射器 | 6 燃油噴射器 | 6 燃油噴射器 | 4 燃油噴射器 | 6 燃油噴射器 | 6 燃油噴射器 | 8 燃油噴射器 |
| 燃油噴射器清洗類型 | 標準燃油噴射器 | 標準燃油噴射器 | 標準燃油噴射器 | 標準燃油噴射器 GDI、EFI、FSI 長燃油噴射器 | 標準燃油噴射器 GDI、EFI、FSI 長燃油噴射器 | 標準燃油噴射器 GDI、EFI、FSI 長燃油噴射器 | 標準燃油噴射器 GDI、EFI、FSI 長燃油噴射器 | 標準燃油噴射器 GDI、EFI、FSI 長燃油噴射器 | 標準燃油噴射器 GDI、EFI、FSI 長燃油噴射器 | 標準燃油噴射器 GDI、EFI、FSI 長燃油噴射器 |
| 支援低阻抗噴油器 | 僅限相容型號；請確認噴油嘴零件號碼和驅動要求 | 僅限相容型號；請確認噴油嘴零件號碼和驅動要求 | 僅限相容型號；請確認噴油嘴零件號碼和驅動要求 | 僅限相容型號；請確認噴油嘴零件號碼和驅動要求 | 僅限相容型號；請確認噴油嘴零件號碼和驅動要求 | 僅限相容型號；請確認噴油嘴零件號碼和驅動要求 | 僅限相容型號；請確認噴油嘴零件號碼和驅動要求 | 僅限相容型號；請確認噴油嘴零件號碼和驅動要求 | 僅限相容型號；請確認噴油嘴零件號碼和驅動要求 | 僅限相容型號；請確認噴油嘴零件號碼和驅動要求 |
| 操作與設備 | ||||||||||
| 油擋板設計 | × | × | × | × | × | ✓ | ✓ | ✓ | ✓ | ✓ |
| 運行工況模擬測試 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 儲物抽屜 | × | × | × | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
使用者手冊及下載
請參考手冊了解設定和測試模式。
AUTOOL CT200 使用手冊
Open the PDF manual for CT200 ultrasonic cleaning, six-injector spray, leakage and volume tests, pressure control, reverse flushing, safety, and troubleshooting.
小包裝
產品包括
- 主機AUTOOL CT200燃油噴射器清洗測試儀。
- 零售包裝盒和說明書CT200產品包裝盒和使用手冊。
- Fuel Rail and Pressure GaugeFuel rail/distributor with pressure gauge.
- 電源線和訊號線Power cable and injector signal wires.
- 適配器、插頭和密封件Injector adapters, unused-position plugs, seals, O-rings, locking rods, and fittings. Confirm exact styles and quantities.
- Cleaning and Fluid AccessoriesFunnel, tank cover, valve, and related fittings.
- 液體和可選套件Cleaning fluid, test fluid, and cleaning-without-removal adapters are included only when the selected package explicitly lists them.
常見問題
Capacity, Fit, and Reading Questions
What Injectors Can AUTOOL CT200 Clean And Test?
CT200 is designed to clean and test compatible standard 12 V gasoline fuel injectors, with up to 6 injectors mounted at once for low-pressure comparison. It helps simulate idle, medium speed, high speed, acceleration, shifting, leakage, spray-pattern, and reverse flushing conditions.
- It cleans and performs relative low-pressure tests on up to six compatible standard 12 V gasoline injectors, including leakage, spray appearance, collected-volume balance, simulated modes, and reverse flushing.
Why choose CT200 over CT150 or CT160?
CT200 increases the bench to six injector positions. CT150 is a four-position non-heated option, while CT160 is a four-position heated option. Choose by batch size, heating need, adapters, and supported injector type.
Can CT200 Test GDI Or High-Pressure Injectors?
No. CT200 only supports 12V standard fuel injectors for testing. For GDI high-pressure injectors, compare CT400, CT450, CT500, FN606, and FN608 by supported injector type and test features.
- No. CT200 tests compatible standard 12 V gasoline injectors. GDI high-pressure and diesel performance testing require other equipment; diesel ultrasonic cleaning is conditional and does not add test capability.
Can I test fewer than six injectors?
Yes, if compatible, by sealing every unused position with approved plugs. Use five plugs for a single-injector setup.
What does reverse flushing do?
For compatible top-feed injectors, it sends the approved fluid through the reverse direction to help dislodge contamination. It is not suitable for every injector design and does not guarantee recovery.
How Should I Choose Injector Test Fluid?
For consistent test results, use professional automotive injector test fluid. Test fluid is a colorless, odorless, non-corrosive liquid used to assess injector performance and simulate working states. If professional test fluid is not available locally, 75%+ medical alcohol can be used as a temporary alternative.
- Keep the injector position, pressure, pulse setting, mode, test fluid, mounting, and time unchanged between baseline and retest. Correct any fixture leak or unstable pressure first.
Can CT200 certify injector flow?
It supports visual and collected-volume comparison, but final pass limits must come from the injector specification or service procedure. It is not presented as an OEM calibration bench.
Which fluids should I use?
Use the manual-approved ultrasonic cleaning fluid in the cleaning tank and approved non-corrosive injector test fluid in the test circuit. Do not mix circuits or use cleaning liquid as test fluid.
CT200 會加熱清洗液嗎？
No. CT200 does not heat the cleaning fluid. If heating is required, compare CT160 while also considering CT200’s larger six-position capacity.
Can it clean injectors without removal?
Only through an optional accessory-dependent procedure that is separate from normal bench testing. Confirm the exact kit and vehicle application before ordering.
包裹中包含什麼？
The package includes the main unit, box, manual, fuel rail and gauge, cables, adapters, plugs, seals, O-rings, locking rods, funnel, tank cover, valve, and related fittings. Confirm quantities against the current packing list.
包含哪些保固？
主機：三年保固。標準配件：一年保固。保固政策。
Can Diesel Injectors Be Cleaned And Tested With AUTOOL CT Series Products?
AUTOOL CT series products can clean diesel injectors, but they cannot test diesel injectors. Use CT200 only within its supported testing range.
How Should I Choose Ultrasonic Cleaning Fluid?
For ultrasonic cleaning, use professional engine carbon cleaning fluid or professional automotive injector ultrasonic cleaning fluid. It helps remove deposits such as carbon buildup from injectors. If professional cleaning fluid is not available locally, 75%+ medical alcohol may be used as a substitute, but the cleaning effect may vary.
我可以用清洗液測試噴油嘴嗎？
No. Do not use cleaning liquid in the injector testing circuit. Cleaning liquid may be corrosive and can damage internal parts, accelerate rubber deterioration, cause leakage, and lead to malfunction. Damage caused by using the wrong fluid may require paid repair.
Why Must I Add Cleaning Fluid Before Ultrasonic Cleaning?
The ultrasonic tank must contain the proper cleaning fluid before the ultrasonic cleaning function is started. Do not run the ultrasonic system dry or with unapproved fluid; doing so may damage the system.
Why Does CT200 Come With Five Plugs?
When testing a single injector, plug the other five unused test positions. CT200 comes with five plugs for single-injector testing or partial injector testing.
如何設定CT200測試參數？
No special settings are needed for normal operation. Select the required function or test mode and set the test time on the control panel.
CT200 和 CT400 有什麼不同？
CT200 only supports 12V standard fuel injectors. CT400 supports both 12V standard injectors and GDI injectors, making it compatible with a wider range of injector types and vehicles. CT200 does not have dedicated accessory storage, while CT400 has a drawer for injector adapters and other accessories.
What Is The Difference Among CT150, CT160, And CT200?
CT150 and CT160 are designed for cleaning and testing fuel injectors of 4-cylinder gasoline engines. CT160 has an ultrasonic heating function, while CT150 does not. Compared with CT150, CT200 mainly adds two additional test positions, allowing up to six injectors to be tested at once, while the other functions remain similar.
What Is The Difference Among CT400, CT450, And CT500?
Compared with CT400, CT450 adds the pulse injection test. Compared with CT450, CT500 further adds wide pulse injection and continuous injection testing. CT450 also has ultrasonic cleaning with heating up to 50°C, while CT400 and CT500 do not have a heating function.
FN608 和 FN606 有什麼不同？
FN608 supports testing for 8 cylinders, while FN606 supports 6 cylinders. FN608 has two independent fuel pumps, each corresponding to a separate left or right fuel rail. If one pump fails, only the corresponding fuel rail is affected, while the other side can continue to operate. FN606 uses a single fuel pump, so a pump failure stops the entire system until the pump is replaced.
FN608 和 CT500 有什麼不同？
- 位置：FN608 測試 8 個噴油嘴；CT500 測試 6 個噴油嘴。
- Heating: FN608 heats to 50°C; CT500 has no heating.
- 驅動器：FN608 支援 12 V / 12–70 V / 120–180 V；CT500 支援 12 V / 70 V / 120 V。
- Tank/pumps: FN608 uses a separate-or-integrated tank with two independent pumps; CT500 uses an integrated tank with one pump.
哪 AUTOOL Injector Cleaner Should I Choose If I Need GDI, Heating, 8-Cylinder Testing, Or Dual Pumps?
Choose CT160 for up to four standard 12 V gasoline injectors, or CT200 for up to six. If you need GDI high-pressure injector support, choose CT400, CT450, CT500, FN606, or FN608. For heated ultrasonic cleaning, compare CT160, CT450, FN606, and FN608 based on injector compatibility and capacity. If you need 8-cylinder testing and dual-pump reliability, choose FN608.
CT200包含哪些配件？
Refer to the Packing List image for final package contents. The package includes the CT200 main unit, fuel rail with pressure gauge, signal wires, power cable, funnel, valve, adapters, seals, O-rings, manual, and related accessories. Confirm quantities before ordering.
保固期有多長？
主機：三年保固。標準配件：一年保固。保固政策。
客戶評價
留言
Tony Donn ✓ 已驗證購買 -
好作品
好作品
john valadao ✓ 已驗證購買 -
很棒的產品。 AAA++
Great product! Can test many injectors!
Hedda Milne ✓ 已驗證購買 -
My ultrasonic cleaner/injector bench tester.
My ultrasonic cleaner/injector bench tester. These are some Supra injectors that’ll be going into my friend’s 4Runner when it gets the supercharger bolted on. This machine allows me to do all sorts of tests and cleaning procedures, but this is just a RPM ramp up to 6500 RPM.