語言和貨幣
AUTOOL BT960 鋰電池和鉛酸電池分析儀
US$139.00
主要特色
- Lead-Acid + Lithium Testing
- 12V/24V System Checks
- 0–10 A Current Range
- Negative-Side Drain Monitoring
- Lead-Acid + Lithium Testing: Test flooded, AGM, EFB, and GEL lead-acid batteries plus lithium iron phosphate, lithium polymer, and ternary lithium types.
- 12V/24V System Checks: Run battery, cranking, charging, and loaded-system voltage checks on supported 12V/24V systems.
- 0–10 A Current Range: Measure current across 0–10 A while following the supported 12 V or 24 V system procedure.
- Negative-Side Drain Monitoring: Monitor small total-current changes through the negative-side connection to investigate abnormal battery drain.
- Customizable Printed Reports: Print test reports with license plate numbers, dates, and serial numbers from the built-in thermal printer.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL BT960 · Automotive Battery Tester with Printer & Leakage Monitor
Monitor Battery Condition, Leakage and Results
Test supported lead-acid and listed lithium battery types, then check cranking, charging, loaded-system voltage, current, and leakage behavior on 12V/24V systems. BT960 records small-current waveforms for drain investigations and prints customizable reports with vehicle and test details for workshop documentation.
- Lead-Acid And Listed Lithium Menus
- 12 V / 24 V System Checks
- 0–10 A Current Range
- Drain-Current Waveform Records
- Customizable Printed Reports
主要特色
Battery Checks, Leakage Monitoring and Printout
Battery & System Tests
Select the battery-test function, choose the status and mode as needed, and follow the on-screen prompts for battery, startup/cranking, charging, running system-voltage behavior with vehicle electrical loads switched on, voltage, current, leakage, and data-record checks on supported 12V and 24V battery systems. The listed current measurement range is 0–10A. The menu is not a traditional high-current resistive battery load test.
Lead-Acid Coverage + Voltage Range
Test supported Regular-Flooded, AGM Spiral, AGM Flat Plate, EFB, and GEL lead-acid battery categories. The 0–80V voltage measurement range is separate from battery health-test compatibility and does not by itself qualify a non-battery or high-voltage system for testing.
Lithium Battery Coverage
Test supported lithium iron phosphate, lithium polymer, ternary lithium, iron-lithium, polymer-lithium, and other listed lithium battery options. Match the battery to the supported test setting; the tester displays the current value after the test.
Battery Drain and Leakage-Current Monitoring
Monitor small changes in total current through the negative-side connection to investigate battery drain, abnormal standby current, and charging-related issues. Follow the vehicle sleep and power-retention procedure, then isolate circuits to identify the responsible branch or component.
即時溫度監測
The built-in sensor tracks ambient temperature to provide context for battery testing. A battery working temperature of 20°C–25°C is generally recommended; follow the actual battery procedure and do not assume the display automatically compensates results.
Customizable Printed Reports
Use the built-in ink-free thermal printer to print battery-test reports on site, add license plate numbers, dates, and serial numbers, and attach the record to a work order or share it with the customer.
14語言
Supports English, Portuguese, Spanish, French, German, Italian, Russian, Turkish, Thai, Japanese, Traditional Chinese, Simplified Chinese, Korean, and Polish.
Battery Rating Systems
Select the battery rating system that matches the battery label, including BCI, SAE, CCA, IEC, EN, CA, DIN, MCA, JIS, and GB.
3.2吋彩色顯示屏
Read test results, menus, and diagnostic prompts on the 3.2-inch color screen.
Waveform + Specification Reference
Review the voltage waveform and battery specifications table as references for more detailed checks.
反向連接保護
Reverse-polarity protection and insulated test clips help protect the battery and tester if positive and negative connections are reversed. Use the correct terminal connection and stop if the tester reports a polarity error.
靈活的電源
Power the tester with four AAA batteries or a Type-C 5V / 1A supply.
Integrated Handheld Design
The 214 × 98 × 40mm body integrates the thermal print port, 3.2-inch color screen, return/power key, print key, OK key, direction keys, electric clamps, control buttons, and battery compartment.
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
服務工作流程
Run Each Battery Check in Its Proper State
步驟進展1 / 6
01
Leakage Test Workflow
After correctly connecting the power clamps to the battery terminals, disconnect the negative terminal and use the special leakage test clamp on the vehicle negative bus to monitor and record real-time leakage current waveform.
02
Identify the Battery
Confirm the battery chemistry, nominal voltage and printed rating standard before choosing the tester menu.
03
正確連接
Switch vehicle loads off as required, place the clamps on clean terminals with correct polarity, and make sure the contact is stable.
04
Enter the Rating
Select the supported battery type and enter the rating standard and value printed on the battery; an Ah field is an input unless the procedure defines a controlled discharge test.
05
Run Separate Checks
Run the supported battery, cranking, charging or loaded-system checks separately so each result keeps its operating context.
06
Review and Record
Read measured voltage and algorithm outputs together, record the conditions, and confirm an unexpected result with terminal, charge-state and vehicle-specific checks.
安全使用
Match Chemistry, Voltage and Test State
Battery Fit and Leakage Test State
Match the selected menu to the exact battery chemistry, nominal voltage, series arrangement, rating standard, and BMS-permitted test state. For leakage-current monitoring, use the documented negative-side connection and the vehicle’s sleep and power-retention procedure; finding the responsible circuit requires a separate isolation workflow. Treat CCA, SOC, health/life, and capacity-like values as algorithm outputs rather than measured amp-hours or exact remaining life.
結果指南
Interpret Battery Results in Context
測量電壓
結合電壓、充電狀態、溫度、端子接觸情況和完整測試結果來評估電池健康狀況。
CCA 或電導輸出
將測試儀演算法的輸出結果與電池標籤上的額定標準和數值進行比較。檢查端子接觸和充電狀態後，如果出現異常結果，請重複上述步驟。
SOC 與健康/生命
Treat SOC and health, life or capacity-like percentages as model-generated indicators rather than measured remaining amp-hours or an exact service-life forecast.
啟動和充電
分別記錄啟動電壓、運轉系統電壓、負載系統電壓。根據車輛操作規程和運轉狀態決定下一步檢查內容。
模型比較
選擇合適的電池系統測試儀
模型指南
選擇一個或多個型號。預設選擇BT960。
已選擇 1 個模型
未選擇任何型號。請選擇一個型號進行比較。
| 產品描述* | BT360 | BT460 | BT760 | BT880 | BT960 |
|---|---|---|---|---|---|
| 測試、監控和保護 | |||||
| 電池測試 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 啟動測試 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 充電系統測試 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 電池充電 | × | × | × | × | × |
| 反極性保護 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 最大負載試驗 | × | ✓ | ✓ | ✓ | ✓ |
| 熱監控器 | × | × | × | ✓ | ✓ |
| 洩漏電流監測 | × | × | × | ✓ | ✓ |
| 電池相容性和續航範圍 | |||||
| 傳統鉛酸蓄電池 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AGM平板電池 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AGM螺旋電池 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 凝膠電池 | ✓ | ✓ | ✓ | ✓ | ✓ |
| EFB增強型富液電池 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 鋰電池 | × | × | × | × | ✓ |
| 測試範圍（CCA） | 30~2000 CCA | 30~2000 CCA | 30~2000 CCA | 30~2000 CCA | 30~2000 CCA |
| 適用電池額定電壓 | 12V | 12V / 24V | 12V / 24V | 12V / 24V | 12V / 24V |
| 電壓測試範圍 | 8-20V | 8〜30V | 8〜30V | 8〜30V | 0〜80V |
| 介面、錄音和電源 | |||||
| 數據打印 | × | × | ✓ | ✓ | ✓ |
| 數據記錄 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 軟件升級 | ✓ | ✓ | × | ✓ | ✓ |
| 彩屏 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 屏幕尺寸 | 2.4英寸 | 2.8inch | 3.2英寸 | 3.2英寸 | 3.2英寸 |
| 多國語言 | 14 | 14 | 14 | 18 | 14 |
| 電源供應 | 連接 12V 電池 | 連接 12V 電池 | 連接 12V 電池 | 連接 12V 電池 | 乾電池 Type-C電源 連接 12V 電池 |
手冊和支持
Find the User Manual and Product Support
AUTOOL BT960 使用手冊
開啟PDF手冊 AUTOOL BT960 lead-acid and lithium battery testing, leakage and temperature monitoring, report printing, power options, safety and troubleshooting support.
包裝內容
看看盒子裡裝了什麼
- 主機AUTOOL BT960 battery tester analyzer
- 文档用戶手冊
- 項目Printing Thermal paper roll for the built-in printer
- 項目Test Cable Main clamp cable for battery testing
- 項目Leakage Test Yellow leakage test cable / special clamp
- 儲存Storage bag and retail box
買家問題
電池測試、適配性和結果問題
Does BT960 Support Lithium Battery Testing?
Yes. BT960 supports iron lithium, polymer lithium, and ternary lithium battery test options. Select the menu that matches the battery chemistry, nominal voltage, series arrangement, and BMS-permitted test state before testing.
Can BT960 Monitor Battery Leakage Current?
Yes. BT960 monitors small changes in total current through its negative-side connection, helping technicians investigate battery drain, abnormal standby current, and charging-related issues. Follow the vehicle sleep and power-retention procedure; locating the responsible branch or component requires circuit isolation.
BT960 有內建印表機嗎？
Yes. BT960 includes a built-in thermal printer. It can print test results with customizable license plate numbers, dates, and serial numbers, making it useful for work orders and customer reports.
What Voltage Range Can BT960 Measure?
BT960 supports a 0-80V voltage measurement range.
What Current Range Can BT960 Measure?
BT960 supports a 0-10A current measurement range.
Does BT960 Support 12V And 24V Battery Systems?
Yes. BT960 is suitable for 12V and 24V battery systems. Match the selected battery menu, chemistry, nominal voltage, and rating input to the battery or vehicle-system task; the 0–80V measurement range does not authorize high-voltage battery service.
What Languages Are Supported?
BT960 supports 14 languages: English, Portuguese, Spanish, French, German, Italian, Russian, Turkish, Thai, Japanese, Traditional Chinese, Simplified Chinese, Korean, and Polish.
包裹內包含哪些物品？
Package contents: BT960 main unit, retail box, user manual, thermal paper roll, main clamp cable, yellow leakage-test cable / special clamp, and storage bag.
客戶評價
留言
Chantland ✓ 已驗證購買 -
这 AUTOOL BT960 is a lifesaver for my auto shop!
这 AUTOOL BT960 is a lifesaver for my auto shop! It does battery, startup, and leakage tests perfectly. The real-time temperature monitoring makes results accurate, and the thermal printer lets me print reports for customers easily. Worth every cent!
藍*棉花糖 ✓ 已驗證購買 -
This tool is my go-to battery doctor!
This tool is my go-to battery doctor! It supports all battery rating systems, so it works with every vehicle I service. The real-time temp monitoring ensures accurate tests even in hot or cold weather. Highly recommend!
史蒂夫 ✓ 已驗證購買 -
The BT960 has all the functions I need—battery, charging, load, and leakage…
The BT960 has all the functions I need—battery, charging, load, and leakage tests. The 14 languages are a big plus for my international customers, and the printer makes record-keeping a breeze. Solid tool!