所有類別

維修測試 / 8 個子類別

汽車維修及測試設備

用於洩漏追蹤、目視檢查、電池健康狀況、電路、壓力、火花、油和電氣讀數的診斷工具。

洩漏追蹤煙霧洩漏偵測器更快找到蒸發排放系統、進氣系統、真空系統、排氣系統和密封系統洩漏。視力檢查智慧鉸接式內視鏡利用可控制攝影機移動，檢查氣壓缸、管道、面板和隱藏空間。電池健康電池系統測試儀檢查電瓶、啟動、充電和供電狀況。電路診斷汽車電路測試儀追蹤電源、接地、連續性、短路和元件啟動故障。液位檢查油液分析儀在進行更深入的診斷之前，先評估油品狀況和污染跡象。壓縮引擎壓力測試儀測量汽缸、燃油、真空和壓力性能。點火測試火星塞測試儀更換前請檢查點火火星情況和火星塞性能。電錶汽車診斷萬用電錶讀取電壓、電阻、電流、頻率和汽車訊號。

維修保養 / 6 個子類別

汽車維修保養設備

用於流體交換、空調診斷、冷媒回收、油處理和冷卻系統維修的維修設備。

ATF服務變速箱油液交換器以可控流量更換自動變速箱油。制動液脈動式煞車油交換器使用脈衝壓力沖洗煞車油，以確保排氣順暢。空調壓力表智慧數位歧管壓力表監測冷媒壓力、真空度、溫度和空調數據。空調恢復製冷劑回收機回收、抽真空並重新充注冷媒，以實現可重複的空調服務。石油處理氣動式排油器和抽油器在維修環境中徹底排出並抽取廢油。冷凍服務冷卻系統測試儀和填充器進行壓力測試、真空填充，並排出滯留空氣。

碳清洗 / 3 個子類別

碳沉積物清洗設備

用於清除噴油嘴、進氣閥、零件和車間清潔工作的積碳設備。

噴油嘴試驗台燃油噴射器清潔劑和測試儀清洗噴油嘴並比較噴霧、流量、洩漏和霧化情況。核桃噴砂核桃砂除碳清潔劑使用核桃砂介質清除進氣閥積碳。乾冰清洗乾冰噴射機有效清除積碳、油脂和污垢，並減少殘留物。

車輪輪胎 / 3 個子類別

車輪和輪胎修理設備

用於四輪定位、舉升、輪胎修理、輪胎安裝和服務車間工作流程的設備。

校準3D車輪定位儀測量定位角度並輔助輪胎磨損校正。海灣起重起重設備用於舉升車輛進行底盤、輪胎、煞車和懸吊系統維修。輪胎服務服務輪胎提供輪胎安裝、平衡、維修和日常輪胎保養服務。

工具收納 / 1 個子類別

工作坊工具收納系列

用於整理車間工具、測試設備和配件的收納產品。

店鋪整理工作坊工具存放將診斷工具和維修設備依區域整理存放。

電動車充電 / 1 個子類別

電動車充電器系列

適用於新能源汽車服務、車間使用和安裝場景的電動車充電產品。

新能源電動汽車充電瀏覽適用於車庫和商店的電動車充電產品。

OBD診斷/5個子類別

OBD診斷工具

OBD 相關測試儀、ECU 編程電源、電纜產品、二手車檢測工具和鑰匙頻率診斷。

二手車檢查二手車診斷測試儀檢查二手車並找出隱藏的系統故障。關鍵訊號汽車鑰匙頻率測試儀檢查遙控鑰匙頻率訊號和鑰匙診斷資訊。連接器電纜OBD電纜尋找車輛介面的診斷電纜和連接器。電纜組OBD線線系列瀏覽 OBD 線材系列，尋找適用的型號、轉接器和安裝方式。程式設計能力ECU編程電源在ECU編程和診斷工作期間，保持車輛電壓穩定。

配件 / 8 個子類別

配件

主要診斷和服務設備的替換零件、適配器、耗材、電纜和附加組件。

對準零件3D車輪定位器配件校準機的目標物、夾具、零件和支撐件。洩漏配件煙霧洩漏偵測器配件煙霧測試所需的轉接器、軟管、蓋子和耗材。相機部件汽車偵測攝影機配件攝影機探頭、鉤子、鏡子、電纜和檢查附件。噴油器部件燃油噴射器清潔劑和測試器配件噴油嘴試驗台的轉接器、管路、密封件及維修零件。核桃部件核桃噴砂機配件核桃除碳清洗用噴嘴、軟管、轉接器和零件。乾冰部件乾冰噴射機配件乾冰噴射所需的噴嘴、管道、接頭和支架。空調部件空調冷媒回收及充填機配件空調設備的軟管、接頭、過濾器、配件和維修零件。電池零件電池測試儀配件電池測試儀的夾鉗、電纜、適配器和附加組件。

🔍

AUTOOL BT360 Digital Automotive Battery Tester

AUTOOL BT360 Digital Automotive Battery Tester

額定 5.00 基於5 82 客戶評級

(82 顧客評價）

US$39.00

主要特色

12V Battery, Cranking + Charging
Flooded, AGM, GEL + EFB
Saved Records + Voltage Waveforms
2.4-Inch, 14-Language Display

出貨倉庫

重設

☰ 請求批次/B2B報價

3 年保用期 主機保固 3 年，配件保固 1 年
90日返回 符合條件的退貨可在 90 天內進行
官方店鋪 正品 · 直接支持

AUTOOL BT360 · 12V Lead-Acid Battery Tester

Check Battery, Cranking and Charging Together

Assess lead-acid battery condition, cranking performance, and charging-system behavior with this handheld automotive battery tester. BT360 supports flooded, AGM, GEL, and EFB starting batteries with common rating standards, then lets you review saved test information and voltage waveforms on its color display. It is designed for battery diagnosis and system checks rather than charging.

Flooded / AGM / GEL / EFB
Battery, Cranking And Charging Tests
CCA / DIN / EN Standards
Saved Results And Waveforms
2.4-Inch Color Screen

AUTOOL BT360 battery system tester main product image with battery test cranking test charging test and reverse polarity protection icons

主要特色

Guided Lead-Acid System Checks

Battery Health & Conductance

Check voltage, capacity status, CCA, internal resistance, and remaining-life information. BT360 measures electrical conductance as an indicator of battery-plate reaction ability, compares it with reference values for a battery in good condition, and uses the result to estimate health, capacity change, and cold-cranking capability. Treat the on-screen suggestion as a next-step guide for further inspection or replacement, not as a complete diagnosis.

Cranking Ability Test

After selecting Cranking Test, follow the prompt to start the engine. BT360 helps evaluate the vehicle battery’s cranking voltage capability.

充電系統測試

After entering Charging Test, follow the prompt to increase speed to about 2500 RPM for 5 seconds, then press OK to complete the test.

Lead-Acid Battery Coverage

Use BT360 with supported 12V/24V lead-acid starting-battery systems, selecting the correct flooded, AGM, GEL, or EFB battery type before testing.

Data Records And Waveform

Review saved battery-test information and voltage waveforms after testing.

14 語言選項

Supports English, Portuguese, Spanish, French, German, Italian, Russian, Turkish, Thai, Japanese, Traditional Chinese, Simplified Chinese, Korean, and Polish.

USB Software Updates

Connect the BT360 to a computer with a USB data cable for applicable software updates.

2.4-Inch Color Screen

Read battery-test menus, prompts, and results on the 2.4-inch color display.

反極性保護

Built-in reverse-polarity protection helps protect the tester if the battery clamps are connected incorrectly.

Selectable Battery Standards

Choose the battery rating standard, including CCA, DIN, or EN, to match the battery label; BT360 supports common global battery test standards.

Handheld Test Design

A compact body, dedicated buttons, insulated clamps, and quick on-screen results support convenient battery-test setup for technicians and DIY users.

3年保固支持

主機：三年保固。標準配件：一年保固。保固政策。

服務工作流程

Identify, Connect, Test and Review

步驟進展1 / 5

Prepare The Vehicle

For Battery Test, switch the vehicle off, place the transmission in Park or Neutral as applicable, engage the handbrake, and keep the work area dry, clean, bright, and ventilated. Do not connect or disconnect the tester while the ignition is on or the engine is running unless the selected cranking or charging test procedure specifically requires that operating state, and do not leave the vehicle unattended during testing.

安全使用

Test Within the Battery and Voltage Limits

Tester, Not Charger

BT360 can run a charging system test, but it does not charge batteries. It is not a battery charger or battery maintainer.

Lithium Batteries Not Supported

BT360 is intended for supported lead-acid starting batteries. Choose BT960 if lithium battery support is required.

No Maximum Load Test

BT360 supports Battery Test, Cranking Test, and Charging System Test. It does not support Maximum Load Test.

Correct Clamp Connection

Connect the red clip to the positive terminal and the black clip to the negative terminal. Reverse polarity protection helps protect the tester, vehicle, and battery, but correct connection is still recommended.

Battery Test With Vehicle Off

When performing a battery test, make sure the vehicle is off first. Follow the device prompts for cranking and charging tests.

New And Old Versions Ship Randomly

BT360 new and old versions may be shipped randomly. The functions are the same; only the color screen and LED screen appearance are different.

Use the Battery Test Results

Use CCA, SOC and health indicators with the battery rating, charge state and vehicle test results to choose the next service step. These algorithm-based indicators are not controlled amp-hour measurements.

Inspect the Cables Before Use

Do not use the tester if the power cable or connection cable is damaged.

Result Guide

Read the Result Before Deciding the Next Step

測量電壓

Review displayed voltage with battery charge state, temperature and terminal condition.

CCA or Conductance Output

Compare the tester’s algorithm output with the rating standard and value entered from the battery label. Repeat unexpected results after checking terminal contact and charge state.

SOC and Health/Life

Treat SOC and health, life or capacity-like percentages as model-generated indicators rather than measured remaining amp-hours or an exact service-life forecast.

Cranking and Charging

Keep cranking voltage, running-system voltage and loaded-system observations separate. Use the vehicle procedure and operating state to decide the next check.

模型比較

Choose the Right Battery System Tester

模型指南

選擇一個或多個型號。預設選擇BT360。

已選擇 1 個模型

BT36012 V batteries / 2.4-inch display / 8–20 V measurement當前模型BT46012 V/24 V batteries / 2.8-inch display / Vehicle-load voltage testBT760Report printer / 3.2-inch display / 12 V/24 V batteriesBT880Leakage monitor / Report printer / 18 languagesBT960Lithium battery tests / 0–80 V measurement / Report printer

AUTOOL 已選擇BT360。請選擇其他型號進行並排比較。

相對比 AUTOOL Battery System Testers
產品描述*	BT360	BT460	BT760	BT880	BT960
Tests, Monitoring & Protection
電池測試	✓	✓	✓	✓	✓
啟動測試	✓	✓	✓	✓	✓
充電系統測試	✓	✓	✓	✓	✓
電池充電	×	×	×	×	×
反極性保護	✓	✓	✓	✓	✓
Maximum Load Test	×	✓	✓	✓	✓
熱監控器	×	×	×	✓	✓
洩漏電流監測	×	×	×	✓	✓
Battery Compatibility & Ranges
Conventional Lead-acid Batteries	✓	✓	✓	✓	✓
AGM Flat Plate Batteries	✓	✓	✓	✓	✓
AGM螺旋電池	✓	✓	✓	✓	✓
凝膠電池	✓	✓	✓	✓	✓
EFB Enhanced Flooded Batteries	✓	✓	✓	✓	✓
鋰電池	×	×	×	×	✓
Test Range(CCA)	30~2000 CCA	30~2000 CCA	30~2000 CCA	30~2000 CCA	30~2000 CCA
Applicable Battery Rated Voltage	12V	12V / 24V	12V / 24V	12V / 24V	12V / 24V
Voltage Test Range	8-20V	8〜30V	8〜30V	8〜30V	0〜80V
Interface, Records & Power
數據打印	×	×	✓	✓	✓
數據記錄	✓	✓	✓	✓	✓
軟件升級	✓	✓	×	✓	✓
彩屏	✓	✓	✓	✓	✓
屏幕尺寸	2.4英寸	2.8inch	3.2英寸	3.2英寸	3.2英寸
多國語言	14	14	14	18	14
電源供應	Connect 12V Battery	Connect 12V Battery	Connect 12V Battery	Connect 12V Battery	乾電池 Type-c Power Supply Connect 12V Battery

手冊和支持

Find Manuals, Paper and Product Support

手冊/PDF

AUTOOL BT360 使用手冊

開啟PDF手冊 AUTOOL BT360 battery health, cranking and charging tests, rating selection, saved records, waveform review, safe connection and troubleshooting support.

快速入門指南

AUTOOL BT360 packing list image with battery system tester retail box and user manual

包裝內容

看看盒子裡裝了什麼

主機AUTOOL BT360 battery and system tester
夾線Integrated red and black battery clamp cable
文档用戶手冊
包裝BT360 retail box
提醒Additional accessories depend on the selected product option.

買家問題

Battery Test, Fit and Result Questions

什麼可以 AUTOOL BT360 Test?

BT360 supports Battery Test, Cranking Test, and Charging System Test. It helps evaluate battery health, cranking voltage capability, and whether the vehicle charging voltage is normal.

Is BT360 A Battery Charger?

No. BT360 is a battery system tester. It can run a charging system test, but it does not charge the battery and should not be used as a battery charger or maintainer.

Does BT360 Support Lithium Batteries?

No. BT360 does not support lithium batteries. Choose BT960 if lithium battery support is required.

Why May The Screen Or Appearance Look Different?

BT360 new and old versions may be shipped randomly. The functions are the same; only the color screen and LED screen appearance are different. Please refer to the actual unit received.

What Battery Types Can BT360 Test?

BT360 supports regular flooded lead-acid, AGM flat plate, AGM spiral, GEL, and EFB batteries when the battery voltage and test range are compatible. It is not for lithium batteries.

Does BT360 Support 24V Batteries?

Check the supplied manual and product label for the rated battery-system voltage and input range before testing. Do not assume 24 V battery support.

Does BT360 Support Maximum Load Test?

No. BT360 does not support Maximum Load Test. Compare BT460, BT760, BT880, or BT960 if this function is needed.

Which Test Standards Are Supported?

BT360 supports common standards including CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB. Use the standard and value printed on the battery label when setting up the test.

How Should I Connect BT360 Before Testing?

For Battery Test, turn the vehicle off first. Connect the red clip to the positive terminal and the black clip to the negative terminal. Then select the battery type, test standard, and test range according to the battery label.

What Should I Do If The Test Result Looks Abnormal?

First recheck the clamp connection, battery type, test standard, and input range. If the result remains abnormal, test again under the correct procedure and contact AUTOOL Store support with photos or a short video.

包裹內包含哪些物品？

Package contents: BT360 tester, retail box, and user manual. Any option-specific contents follow the selected product configuration.

保固期有多長？