語言和貨幣
AUTOOL BT210 Automotive Circuit Tester with Temperature Mode
US$28.00
主要特色
- Voltage, Continuity, Polarity + Temperature
- 9–30V DC Coverage
- Display + Contact-Area Light
- 205 mm Body + 1.1 m Lead
- Voltage, Continuity, Polarity + Temperature: Switch among voltage, continuity, polarity, and contact-temperature checks from one handheld probe.
- 9–30V DC Coverage: Measure compatible 9–30V DC vehicle circuits, including common 12V cars and 24V trucks.
- Display + Contact-Area Light: Read results at the probe and illuminate the contact area with the built-in light.
- 205 mm Body + 1.1 m Lead: Use the slim 205 mm body and 1.1 m lead for close vehicle-circuit checks.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL BT210 · 9–30V Circuit and Temperature Probe
Check Voltage, Polarity, Continuity and Temperature
Check voltage, continuity, polarity, and contact temperature with this handheld automotive circuit tester on compatible 9–30V DC vehicle circuits. BT210 displays results at the test point and lights the contact area for work in darker spaces, while its compact body and short lead suit close engine-bay and cabin checks.
- 9–30 V 直流電路
- Voltage / Continuity / Polarity
- Contact Temperature Test
- 1.1米測試線
- Integrated Probe Light
主要特色
Four Probe Modes with an On-Tool Display
電壓測試
Measure the voltage of the circuit under test directly within the supported 9-30V DC range.
Circuit Continuity Test
Detect open-circuit, closed-circuit, virtual circuit, and real circuit conditions. Indicator on means closed or real circuit; indicator off means open or virtual circuit.
極性測試
Identify circuit polarity quickly. The green light represents the positive pole, and the red light represents the negative pole.
溫度測試
A temperature sensor at the probe tip detects the temperature of the designated contact point.
Probe Light Function
After power-on, the light turns on by default. Press the Lighting key to turn the light beside the probe on or off.
Four Test Modes
BT210 combines voltage, continuity, polarity and contact temperature testing.
過載保護
Overvoltage and overcurrent protection help protect the tester during supported circuit checks.
Slim Handheld Probe
A 205 × 23 × 18mm body, 1.1m lead and integrated display keep circuit checks within a compact handheld tool.
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
服務工作流程
Select the Mode Before Probing
步驟進展1 / 5
01
Identify the Circuit
Use the vehicle wiring diagram to identify the conductor, reference point and expected state.
02
Choose the Mode
Begin with the supported passive voltage, polarity or continuity check and verify the tester range.
03
Connect the Probe
Make a secure connection without bridging adjacent terminals or damaging the connector.
04
Run the Selected Check
Do not use this tester to apply power, ground, or a signal output. Follow the component procedure and use only its documented voltage, continuity, polarity, and contact-temperature modes.
05
Confirm the Finding
Use the observed value to choose the next check; confirm a suspected open, short or component fault at the circuit.
安全使用
Stay Within the Supported DC Circuit
僅限 9-30V 直流
Use BT210 only on 9-30V direct current vehicle circuits. It is suitable for typical 12V car and 24V truck electrical systems within this range.
Do Not Use On AC
Do not use BT210 on alternating current circuits. It should not be used on DC circuits above 30V.
過載保護
When the measured voltage is greater than 30V or measured current is greater than 10A, the tool starts self-protection to help reduce losses.
火花風險
Sparks may appear on the probe during work. Do not use the tester around combustible gas, dust, or flammable and explosive environments.
Check Tool Condition
Stop using the tester if the instrument body or test lead is damaged. Check and tighten loose connected parts before operation.
尖銳探針尖端
The probe tip is sharp. Handle carefully during use and storage, and keep the tool properly stored after testing.
利用結果規劃下次檢查
Within the 9–30V DC range, use the displayed voltage, polarity, continuity, or temperature with the circuit diagram and expected operating condition.
模型比較
選擇合適的電路測試工具
模型指南
選擇一個或多個型號。預設選擇BT210。
已選擇 1 個模型
未選擇任何型號。請選擇一個型號進行比較。
| 產品描述* | BT160 | BT210 | BT250 | BT260 | BT280 |
|---|---|---|---|---|---|
| 測量範圍 | |||||
| 直流電壓測量範圍 | × | 9〜30V | 0〜65V | 0〜65V | 0.1〜100V |
| 交流電壓測量範圍 | × | 9〜30V | 0〜65V | 0〜65V | 0.1〜100V |
| 電阻測量範圍 | × | × | 0~200KΩ | 0~200KΩ | 1~200KΩ |
| 電流測量範圍 | 0〜10A | 0〜10A | 1〜10A | 1–10 A stated rated-current/protection limit; no ammeter mode established | 0〜18A |
| 核心測試與保護 | |||||
| 直流電壓偵測模式 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 接地測試 | ✓ | × | ✓ | ✓ | ✓ |
| 溫度測試 | × | ✓ | × | × | × |
| 極性測試 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 電流過載保護 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 連續性測試 | ✓ | ✓ | ✓ | ✓ | ✓ |
| 二極體測試模式 | ✓ | × | ✓ | ✓ | ✓ |
| 電阻檢測模式 | × | × | ✓ | ✓ | ✓ |
| 高級診斷和輸出 | |||||
| 噴油嘴測試 | × | × | × | × | ✓ |
| 0~5V電源 | × | × | × | × | ✓ |
| 繼電器測試 | × | × | × | × | ✓ |
| 組件啟動 | × | × | × | × | ✓ |
| 示波器模式 | × | × | × | × | ✓ |
| 萬用電錶模式 | × | × | × | × | ✓ |
| 智慧測試 | × | × | × | × | ✓ |
| 硬體、電源、介面和更新 | |||||
| 工作電壓 | 6〜24V | 9〜30V | 9〜30V | 9〜30V | 9〜30V |
| 電源線長度 | 4m | 1.1m | 1.5m | 12m | 6m |
| 多種語言 | × | × | 9 | 9 | 14 |
| 屏幕尺寸 | × | × | 1.65英寸 | 1.65英寸 | 2.8英寸 |
| TFT彩色顯示屏 | × | × | ✓ | ✓ | ✓ |
| LED燈 | × | ✓ | ✓ | ✓ | ✓ |
| 在線更新 | × | × | × | × | ✓ |
手冊和支持
尋找手冊和連接指南
AUTOOL BT210 使用手冊
開啟PDF手冊 AUTOOL BT210 voltage, continuity, polarity and temperature tests, operating modes, probe lighting, overload protection and troubleshooting support.
包裝內容
看看盒子裡裝了什麼
- 主機AUTOOL BT210 power circuit probe tester with attached probe and cable
- 接地夾Earth clamp / ground connection
- 文档AUTOOL BT210 使用手冊
- 零售包裝盒BT210 retail packaging
買家問題
電路連接與測量問題
What Voltage Range Can AUTOOL BT210 Test?
BT210 is designed for 9-30V DC vehicle circuits. It is suitable for typical 12V cars, 24V trucks, motorcycles, and other compatible DC vehicle electrical systems within this range.
Can BT210 Be Used On AC Circuits?
No. BT210 should not be used on alternating current circuits, and it should not be used on DC circuits greater than 30V.
What Test Modes Does BT210 Support?
BT210 supports four switchable modes: voltage test, continuity test, polarity test, and temperature test. Press the M key to switch between the four modes.
How Does The Voltage Test Work?
Voltage test is used to measure the voltage of the circuit under test. Use it only within the BT210 rated 9-30V DC range.
How Should I Read The Continuity Test?
Continuity test can detect open-circuit, closed-circuit, virtual circuit, and real circuit conditions. If the indicator light is on, the circuit under test is closed or real. If the indicator light is off, the circuit under test is open or virtual.
How Should I Read The Polarity Test?
In polarity test, the green light represents the positive pole and the red light represents the negative pole.
What Does The Temperature Test Measure?
A temperature sensor is installed at the probe tip to detect the temperature of the designated contact point.
What Happens If The Voltage Or Current Is Too High?
When the measured voltage is greater than 30V or the measured current is greater than 10A, BT210 starts self-protection to help reduce losses. Stop testing and confirm the circuit before continuing.
Why Should I Avoid Flammable Environments?
Sparks may appear on the probe during operation. Do not use BT210 around combustible gas, dust, or flammable and explosive atmospheres.
What Vehicles Is BT210 Suitable For?
BT210 is suitable for cars, trucks, motorcycles, and other compatible vehicle electrical systems, as long as the circuit being tested is within the 9-30V DC range.
BT210 套裝包含哪些內容？
Package contents: BT210 main unit with attached probe and cable, earth clamp / ground connection, user manual, and retail box.
How Is BT210 Different From BT160, BT250, BT260, And BT280?
BT210 is a compact 9-30V DC tester with voltage, continuity, polarity, temperature test, LED light, and about 1.1m wire length. BT160 is more entry-level, BT250 and BT260 add larger display and more measurement ranges, and BT280 adds advanced functions such as relay test, injector test, component activation, oscilloscope mode, multimeter mode, smart test, and online update.
How Should I Maintain And Store BT210?
Do not overload the equipment. Regularly check and tighten connected parts, avoid corrosive liquids, and avoid rubbing the tester against rough surfaces, especially its sheet-metal housing. Store it in a dry, ventilated place away from hot or humid conditions.
保固期有多長？
主機：三年保固。標準配件：一年保固。保固政策。
客戶評價
留言
還沒有評論率先分享您使用此產品的體驗。