所有類別

維修測試 / 8 個子類別

汽車維修及測試設備

用於洩漏追蹤、目視檢查、電池健康狀況、電路、壓力、火花、油和電氣讀數的診斷工具。

洩漏追蹤煙霧洩漏偵測器更快找到蒸發排放系統、進氣系統、真空系統、排氣系統和密封系統洩漏。視力檢查智慧鉸接式內視鏡利用可控制攝影機移動，檢查氣壓缸、管道、面板和隱藏空間。電池健康電池系統測試儀檢查電瓶、啟動、充電和供電狀況。電路診斷汽車電路測試儀追蹤電源、接地、連續性、短路和元件啟動故障。液位檢查油液分析儀在進行更深入的診斷之前，先評估油品狀況和污染跡象。壓縮引擎壓力測試儀測量汽缸、燃油、真空和壓力性能。點火測試火星塞測試儀更換前請檢查點火火星情況和火星塞性能。電錶汽車診斷萬用電錶讀取電壓、電阻、電流、頻率和汽車訊號。

維修保養 / 6 個子類別

汽車維修保養設備

用於流體交換、空調診斷、冷媒回收、油處理和冷卻系統維修的維修設備。

ATF服務變速箱油液交換器以可控流量更換自動變速箱油。制動液脈動式煞車油交換器使用脈衝壓力沖洗煞車油，以確保排氣順暢。空調壓力表智慧數位歧管壓力表監測冷媒壓力、真空度、溫度和空調數據。空調恢復製冷劑回收機回收、抽真空並重新充注冷媒，以實現可重複的空調服務。石油處理氣動式排油器和抽油器在維修環境中徹底排出並抽取廢油。冷凍服務冷卻系統測試儀和填充器進行壓力測試、真空填充，並排出滯留空氣。

碳清洗 / 3 個子類別

碳沉積物清洗設備

用於清除噴油嘴、進氣閥、零件和車間清潔工作的積碳設備。

噴油嘴試驗台燃油噴射器清潔劑和測試儀清洗噴油嘴並比較噴霧、流量、洩漏和霧化情況。核桃噴砂核桃砂除碳清潔劑使用核桃砂介質清除進氣閥積碳。乾冰清洗乾冰噴射機有效清除積碳、油脂和污垢，並減少殘留物。

車輪輪胎 / 3 個子類別

車輪和輪胎修理設備

用於四輪定位、舉升、輪胎修理、輪胎安裝和服務車間工作流程的設備。

校準3D車輪定位儀測量定位角度並輔助輪胎磨損校正。海灣起重起重設備用於舉升車輛進行底盤、輪胎、煞車和懸吊系統維修。輪胎服務服務輪胎提供輪胎安裝、平衡、維修和日常輪胎保養服務。

工具收納 / 1 個子類別

工作坊工具收納系列

用於整理車間工具、測試設備和配件的收納產品。

店鋪整理工作坊工具存放將診斷工具和維修設備依區域整理存放。

電動車充電 / 1 個子類別

電動車充電器系列

適用於新能源汽車服務、車間使用和安裝場景的電動車充電產品。

新能源電動汽車充電瀏覽適用於車庫和商店的電動車充電產品。

OBD診斷/5個子類別

OBD診斷工具

OBD 相關測試儀、ECU 編程電源、電纜產品、二手車檢測工具和鑰匙頻率診斷。

二手車檢查二手車診斷測試儀檢查二手車並找出隱藏的系統故障。關鍵訊號汽車鑰匙頻率測試儀檢查遙控鑰匙頻率訊號和鑰匙診斷資訊。連接器電纜OBD電纜尋找車輛介面的診斷電纜和連接器。電纜組OBD線線系列瀏覽 OBD 線材系列，尋找適用的型號、轉接器和安裝方式。程式設計能力ECU編程電源在ECU編程和診斷工作期間，保持車輛電壓穩定。

配件 / 8 個子類別

配件

主要診斷和服務設備的替換零件、適配器、耗材、電纜和附加組件。

對準零件3D車輪定位器配件校準機的目標物、夾具、零件和支撐件。洩漏配件煙霧洩漏偵測器配件煙霧測試所需的轉接器、軟管、蓋子和耗材。相機部件汽車偵測攝影機配件攝影機探頭、鉤子、鏡子、電纜和檢查附件。噴油器部件燃油噴射器清潔劑和測試器配件噴油嘴試驗台的轉接器、管路、密封件及維修零件。核桃部件核桃噴砂機配件核桃除碳清洗用噴嘴、軟管、轉接器和零件。乾冰部件乾冰噴射機配件乾冰噴射所需的噴嘴、管道、接頭和支架。空調部件空調冷媒回收及充填機配件空調設備的軟管、接頭、過濾器、配件和維修零件。電池零件電池測試儀配件電池測試儀的夾鉗、電纜、適配器和附加組件。

🔍

AUTOOL AST609 脈動式煞車油更換器

額定 5.00 基於5 55 客戶評級

(55 顧客評價）

US$259.00

主要特色

Two-Wheel Simultaneous Service
1.5–2.0 / 2.0–2.5 Bar Modes
Seven Reservoir Adapters
DOT3 / DOT4 / DOT5.1

電壓

出貨倉庫

重設

☰ 請求批次/B2B報價

3 年保用期 主機保固 3 年，配件保固 1 年
90日返回 符合條件的退貨可在 90 天內進行
官方店鋪 正品 · 直接支持

AUTOOL AST609 · Two-Wheel Pulsating Brake Fluid Bleeder

Service Two Brake Positions at Once

AUTOOL AST609 exchanges brake fluid at two wheel positions together with one operator. AST609 offers standard and fast pressure modes, connects through seven reservoir-adapter types, and collects used fluid while low-fluid protection reduces empty-supply operation. Use the vehicle-specified DOT3, DOT4, or DOT5.1 fluid and prescribed bleed sequence.

Two-Wheel Simultaneous Service
1.5–2.5 bar Mode Range
Seven Reservoir Adapters
DOT3 / DOT4 / DOT5.1
12 V or Mains Power Options

AUTOOL AST609 pulsating brake fluid bleeder main product image with one-button fluid exchange adjustable pressure and pressure display

主要特色

Standard and Fast Pulsating Pressure Modes

Two-Wheel One-Person Service

With the correct setup, the pulsating electric brake-oil exchanger supports simultaneous brake-fluid exchange at two wheels and can be operated by one person, reducing repeated manual bleeding work.

1.5–2.5 bar Service Modes

Select Standard Mode at about 1.5-2.0 bar or Fast Mode at about 2.0-2.5 bar. Use the front pressure gauge and adjustment knob to monitor and control working pressure throughout the service.

Used Fluid Recovery

Recover used brake fluid during service to keep the work area cleaner and make replacement easier to manage.

Water Separation Filter

The air-inlet water-separation filter helps remove moisture before air mixes with the oil path, supporting cleaner service quality.

Low Oil Protection

Low-oil protection helps reduce the risk of operating the equipment without enough brake fluid in the supply bottle.

Portable Bottle + Hose Storage

The compact body includes a carry handle, filling-hose hook, pressure gauge, indicators, fuse, power interface, and a dedicated bracket for the 1L corrosion-resistant filling bottle. Visible bottle graduations and the hook keep the service setup organized.

Two Power Connection Options

Use the battery-clip power connection or a compatible mains adapter, matching the setup to the unit requirements before operation.

Seven Reservoir Adapters

Match one of seven reservoir adapters to the vehicle opening and confirm that it fits and seals correctly before service.

3年保固支持

主機：三年保固。標準配件：一年保固。保固政策。

服務工作流程

Prime, Connect Two Positions and Bleed

步驟進展1 / 7

Prepare The Machine

Place the brake fluid exchanger firmly on a flat surface. Make sure the filling hose is not under mechanical tension when the vehicle is lifted.

安全使用

Match Power Version, Pressure and Adapter Fit

Brake Fluid Standards

Applicable to DOT3, DOT4, and DOT5.1 brake fluid standards. Do not use other liquids in the machine.

Seven Adapter Types

AST609 includes B01, B02, B03, B04, B05, B06, and B07 adapter types for broader reservoir compatibility.

Confirm Adapter Fit

Use the adapter image and listed brand or series labels as an initial selection guide, then confirm exact vehicle fit before ordering.

First-Use Air Emptying Required

Air-emptying must be performed before first use. Fill the equipment line with brake fluid and remove air before connecting the device for normal vehicle service.

Use Correct Working Pressure

The pressure regulator is typically set around 1-1.5 bar before leaving the factory to help protect the fluid reservoir chamber and secondary sealing ring.

避免壓力過大

Lower pressure may be used for exhaust or fluid replacement when suitable. Excessive pressure may damage the brake master cylinder or sealing components.

Check Connections Before Use

Before changing brake fluid, check every connection for leaks and inspect the connection hoses for damage.

Use Brake Fluid Only

Use the AST609 only for brake and clutch brake-fluid service. Other liquids may damage the brake maintenance device.

Prime the Fluid Line

Fill the delivery line with the specified brake fluid and remove air before connecting it to the vehicle.

Handle Brake Fluid and Power Safely

Brake fluid is toxic. Avoid skin and eye contact, and wear safety goggles and protective gloves. Disconnect power before inspection, service, or cleaning, and do not operate the bleeder in damp or humid environments.

模型比較

Choose the Right Brake Fluid Bleeder

模型指南

Choose one or more models. AST609 is selected by default.

已選擇 1 個模型

穀草轉氨酶6031-caliper bleeding / 1 adapter / 0.5–2.5 bar穀草轉氨酶6051-caliper bleeding / 3 adapters / 0.7–3 bar穀草轉氨酶6092-caliper bleeding / 7 adapters / 0.5–2.5 bar當前模型穀草轉氨酶6122-caliper bleeding / 9 adapters / 2.6 L/min穀草轉氨酶6184-caliper bleeding / 17 adapters / Pulse settings

AUTOOL AST609 is selected. Choose another model for a side-by-side comparison.

相對比 AUTOOL Brake Fluid Bleeders
產品描述*	穀草轉氨酶603	穀草轉氨酶605	穀草轉氨酶609	穀草轉氨酶612	穀草轉氨酶618
Service Method & Capacity
工作原理	Fully Automatic One-Click Pulsating Oil Change	Fully Automatic One-Click Pulsating Oil Change	Fully Automatic One-Click Pulsating Oil Change	Fully Automatic One-Click Pulsating Oil Change
油瓶	1L · 1 Used Oil Bottle	1L · 1 Used Oil Bottle	1.5L · 1 Old Oil Bottle 1L · 1 New Oil Bottle	1.5L · 2 Old Oil Bottle 1L · 1 New Oil Bottle	1.5L · 4 Old Oil Bottles 3L · 1 Integrated Stainless Steel Oil Bottle
Number of Brake Calipers	1pc	1pc	2片	2片	4片
Shutdown Pressure Relief Function	×	×	×	30 Seconds Pressure Relief Time	10 Seconds Pressure Relief Time
Number of Brake Caliper Changed Simultaneously	Single-Wheel Oil Change	Single-Wheel Oil Change	Simultaneous Oil Change for Two Wheels	Simultaneous Oil Change for Two Wheels	Simultaneous Oil Change for Four Wheels
Maximum Output Flow Rate	1.6L /分鐘	1.6L /分鐘	1.6L /分鐘	2.6 升/分鐘	1.6L /分鐘
脈衝設定	×	×	×	×	✓
Working Pressure Adjustment	✓	✓	✓	✓	✓
Working Time Settings	×	×	×	×	✓
Power, Pressure & Connections
輸入電壓	AC 110/220 V or DC 12 V — match the selected power configuration	110 / 220V	110/220伏或12伏	DC12V	DC12V
工作壓力	0.5-2.5bar	0.7-3bar(±0.2bar)	0.5-2.5bar	1.5巴-3.0巴	0.6-3.0bar
相容連接器	1種	3類型	7類型	9類型	17類型
壓力計	✓	✓	✓	✓	✓
Power Aviation Plug	✓	✓	✓	×	×
Mobility & Physical Setup
產品重量	5.2kg	5.3kg	7.4kg	8kg	23.5kg
360° Casters	×	×	×	×	✓
Three-Section Telescoping Handle Design	×	×	×	×	✓

手冊和支持

Find the Manual and Bleeding Guidance

手冊/PDF

AUTOOL AST609 User Manual

開啟PDF手冊 AUTOOL AST609 two-wheel brake-fluid service, pressure-mode selection, reservoir adapters, fluid compatibility, low-fluid protection, recovery and troubleshooting support.

快速入門指南

AUTOOL AST609 packing list showing brake fluid bleeder main unit retail box power cable seven adapters filling bottle recovery bottle and user manual

包裝內容

看看盒子裡裝了什麼

主機AUTOOL AST609 brake fluid bleeder
零售包裝盒AST609 product packaging
電力電纜電力電纜
適配器Seven adapter types
Brake Fluid BottlesNew-fluid filling bottle and recovery bottle
文档用戶手冊

買家問題

Bleeder Setup, Adapter and Fluid Questions

What Working Pressure Should I Use For AST609?

The pressure regulator is typically set around 1-1.5 bar before the device leaves the factory. During service, AST609 supports Standard Mode around 1.5-2.0 bar and Fast Mode around 2.0-2.5 bar. Do not adjust pressure excessively, because excessive pressure may damage the brake master cylinder or sealing components.

What Is The Difference Between Standard Mode And Fast Mode?

Standard Mode works around 1.5-2.0 bar and is suitable for normal brake fluid exchange. Fast Mode works around 2.0-2.5 bar and is designed for faster service when the vehicle and service conditions allow it. Select the required mode before starting the fluid exchange.

Does AST609 Need Air-Emptying Before First Use?

Yes. Air-emptying must be performed at first startup. Fill the equipment line with brake fluid and evacuate air before normal brake fluid exchange. This helps prevent air from mixing into the vehicle brake system through the equipment line.

How Many Wheels Can AST609 Service At The Same Time?

AST609 supports simultaneous brake fluid exchange for two wheels under the correct setup. If four-wheel simultaneous service is required, compare AST618, which is designed for four-wheel simultaneous oil change.

What Brake Fluid Types Are Compatible?

AST609 is applicable for DOT3, DOT4, and DOT5.1 brake fluid standards. Do not use other liquids, because liquids other than brake fluid may damage the brake maintenance device.

What Vehicles Can AST609 Fit?

AST609 includes seven adapter types for many European, American, and Asian vehicles. The adapter chart lists examples such as Mercedes-Benz, BMW, Audi, Volkswagen, Volvo, Land Rover, Jaguar, Porsche, Buick, Chevrolet, Ford, Honda, Toyota, Nissan, Dodge, Chrysler, JEEP, Hyundai, Subaru, Mitsubishi, Lexus, and other listed models. Because reservoir cap designs vary, confirm adapter fitment before ordering if the vehicle is uncertain.

What Power Supply Does AST609 Support?

Power methods are AC 110/220 V socket supply or 12 V battery supply. Confirm the selected power version, plug, transformer, and supplied cable before ordering.

What Is The Difference Between AST603, AST605, And AST609?

AST603 is an entry model with one compatible connector type and single-wheel oil change. AST605 adds more adapter coverage with three connector types while keeping a similar core setup. AST609 includes seven connector types, one 1.5L used-oil bottle, one 1L new-oil bottle, dual pressure modes, and simultaneous oil change for two wheels.

What Is The Difference Between AST609, AST612, And AST618?

AST609 includes seven adapter types and supports two-wheel simultaneous service. AST612 includes two 1.5L used-oil bottles, one 1L new-oil bottle, nine adapter types, and two-wheel simultaneous service. AST618 includes four 1.5L used-oil bottles, one integrated stainless steel oil bottle, seventeen adapter types, pulse mode and working-time settings, 360° casters, a three-section handle, and four-wheel simultaneous service.

What Should I Check Before Changing Brake Fluid?

Check each connection for leaks, inspect the connecting hose for damage, keep the new oil filler port clean, confirm that the adapter is sealed, confirm the pressure setting, and follow the vehicle manufacturer’s bleeding sequence and maximum filling pressure.

What Is Included In The AST609 Package?

Package contents: AST609 main unit, retail box, power cable, seven adapter types, new-fluid filling bottle, recovery bottle, user manual, and the listed accessories.

保固期有多長？