所有類別

維修測試 / 8 個子類別

汽車維修及測試設備

用於洩漏追蹤、目視檢查、電池健康狀況、電路、壓力、火花、油和電氣讀數的診斷工具。

洩漏追蹤煙霧洩漏偵測器更快找到蒸發排放系統、進氣系統、真空系統、排氣系統和密封系統洩漏。視力檢查智慧鉸接式內視鏡利用可控制攝影機移動，檢查氣壓缸、管道、面板和隱藏空間。電池健康電池系統測試儀檢查電瓶、啟動、充電和供電狀況。電路診斷汽車電路測試儀追蹤電源、接地、連續性、短路和元件啟動故障。液位檢查油液分析儀在進行更深入的診斷之前，先評估油品狀況和污染跡象。壓縮引擎壓力測試儀測量汽缸、燃油、真空和壓力性能。點火測試火星塞測試儀更換前請檢查點火火星情況和火星塞性能。電錶汽車診斷萬用電錶讀取電壓、電阻、電流、頻率和汽車訊號。

維修保養 / 6 個子類別

汽車維修保養設備

用於流體交換、空調診斷、冷媒回收、油處理和冷卻系統維修的維修設備。

ATF服務變速箱油液交換器以可控流量更換自動變速箱油。制動液脈動式煞車油交換器使用脈衝壓力沖洗煞車油，以確保排氣順暢。空調壓力表智慧數位歧管壓力表監測冷媒壓力、真空度、溫度和空調數據。空調恢復製冷劑回收機回收、抽真空並重新充注冷媒，以實現可重複的空調服務。石油處理氣動式排油器和抽油器在維修環境中徹底排出並抽取廢油。冷凍服務冷卻系統測試儀和填充器進行壓力測試、真空填充，並排出滯留空氣。

碳清洗 / 3 個子類別

碳沉積物清洗設備

用於清除噴油嘴、進氣閥、零件和車間清潔工作的積碳設備。

噴油嘴試驗台燃油噴射器清潔劑和測試儀清洗噴油嘴並比較噴霧、流量、洩漏和霧化情況。核桃噴砂核桃砂除碳清潔劑使用核桃砂介質清除進氣閥積碳。乾冰清洗乾冰噴射機有效清除積碳、油脂和污垢，並減少殘留物。

車輪輪胎 / 3 個子類別

車輪和輪胎修理設備

用於四輪定位、舉升、輪胎修理、輪胎安裝和服務車間工作流程的設備。

校準3D車輪定位儀測量定位角度並輔助輪胎磨損校正。海灣起重起重設備用於舉升車輛進行底盤、輪胎、煞車和懸吊系統維修。輪胎服務服務輪胎提供輪胎安裝、平衡、維修和日常輪胎保養服務。

工具收納 / 1 個子類別

工作坊工具收納系列

用於整理車間工具、測試設備和配件的收納產品。

店鋪整理工作坊工具存放將診斷工具和維修設備依區域整理存放。

電動車充電 / 1 個子類別

電動車充電器系列

適用於新能源汽車服務、車間使用和安裝場景的電動車充電產品。

新能源電動汽車充電瀏覽適用於車庫和商店的電動車充電產品。

OBD診斷/5個子類別

OBD診斷工具

OBD 相關測試儀、ECU 編程電源、電纜產品、二手車檢測工具和鑰匙頻率診斷。

二手車檢查二手車診斷測試儀檢查二手車並找出隱藏的系統故障。關鍵訊號汽車鑰匙頻率測試儀檢查遙控鑰匙頻率訊號和鑰匙診斷資訊。連接器電纜OBD電纜尋找車輛介面的診斷電纜和連接器。電纜組OBD線線系列瀏覽 OBD 線材系列，尋找適用的型號、轉接器和安裝方式。程式設計能力ECU編程電源在ECU編程和診斷工作期間，保持車輛電壓穩定。

配件 / 8 個子類別

配件

主要診斷和服務設備的替換零件、適配器、耗材、電纜和附加組件。

對準零件3D車輪定位器配件校準機的目標物、夾具、零件和支撐件。洩漏配件煙霧洩漏偵測器配件煙霧測試所需的轉接器、軟管、蓋子和耗材。相機部件汽車偵測攝影機配件攝影機探頭、鉤子、鏡子、電纜和檢查附件。噴油器部件燃油噴射器清潔劑和測試器配件噴油嘴試驗台的轉接器、管路、密封件及維修零件。核桃部件核桃噴砂機配件核桃除碳清洗用噴嘴、軟管、轉接器和零件。乾冰部件乾冰噴射機配件乾冰噴射所需的噴嘴、管道、接頭和支架。空調部件空調冷媒回收及充填機配件空調設備的軟管、接頭、過濾器、配件和維修零件。電池零件電池測試儀配件電池測試儀的夾鉗、電纜、適配器和附加組件。

優惠促銷 🔍

優惠促銷

AUTOOL T22 Tiered ECU Programming Cart

額定 5.00 基於5 14 客戶評級

(14 顧客評價）

原價為：499.00 美元。目前價格為：335.00 美元。

主要特色

Three-Tier Programming Cart
530×740×1,020毫米
Strap + Cable Hooks
Four Lockable Casters

出貨倉庫

重設

☰ 請求批次/B2B報價

3 年保用期 主機保固 3 年，配件保固 1 年
90日返回 符合條件的退貨可在 90 天內進行
官方店鋪 正品 · 直接支持

AUTOOL T22 · Three-Tier Programming Equipment Cart

Separate Laptop, Power Supply and Battery

Separate a laptop, programming supply, diagnostic tools, cables, parts, and a vehicle battery across three open levels with the AUTOOL T22 rolling tool cart. A securing strap and side hooks control power equipment and leads, while locking swivel casters move and park the setup beside each vehicle.

Cart Size: 530 × 740 × 1,020 mm
Three Open Storage Tiers
Equipment Securing Strap
Cable and Tool Hooks
帶鎖旋轉腳輪

AUTOOL T22 rolling utility cart for automotive service and programming power setup

主要特色

Organize Programming Equipment Across Three Levels

Three-Tier Equipment Storage

This modular three-tier tool cart separates a laptop, programming power supply, professional tools, spare parts, and a vehicle battery for a cleaner diagnostic workflow.

重型鋼製車身

The cart is made with cold-rolled steel plate and a reinforced structure for strong toughness, durability, and resistance to deformation during workshop use.

防銹耐腐蝕

The powder-coated glossy finish helps resist rust and corrosion while making the surface easier to clean after automotive repair and maintenance work.

360°旋轉腳輪

Natural rubber casters help reduce ground friction and noise. Four flexible casters support stable movement, and lockable casters help keep the cart fixed at the work site.

Handrail, Strap & Hooks

The stainless steel handrail supports easy pushing, the strap helps secure programming power equipment, and side hooks help organize cables and tools.

530 × 740 × 1020mm Layout

T22 combines a cold-rolled-steel body with three storage levels in a 530 × 740 × 1020mm cart layout.

模塊化組裝

Assemble the casters, frame and shelves with the supplied hardware, following the installation instructions before use.

3年保固支持

主機：三年保固。標準配件：一年保固。保固政策。

如何使用

Assemble, Load, Brake and Move the Cart

步驟進展1 / 5

Define The Setup

List the laptop, programming supply, battery, tools, and cables required for the job and confirm their combined weight and footprint.

安全性和相容性

Distribute Weight and Secure the Cart

不要超載

Comply with safe operation procedures and do not overload the cart. Keep the safety protection setup complete and reliable.

Check Fasteners Often

Frequently check parts that need fastening and connection. If any part is loose, tighten it in time to support safe operation.

Avoid Rough Scratches

Be careful not to rub the cart against rough surfaces, especially sheet metal casings, to protect the powder-coated finish.

Maintain Corrosion Resistance

For parts that contact chemical media, use anti-corrosion treatment such as rust removal and painting when needed.

Store In A Dry Place

Store the product in a dry place when not in use. Avoid high temperature, high humidity, or poorly ventilated storage areas.

Remove Unsafe Factors

Eliminate unsafe factors in time, especially loose connections, unstable load placement, damaged wheels, or corroded parts.

模型比較

Choose Storage Around the Service Task

模型指南

Choose one or more models. T22 is selected by default.

已選擇 1 個模型

T20Brake bleeder / 1 drawer / 52 × 67 × 100 cmT21Injector service / 1 drawer / 58 × 78 × 100 cmT22Programming supply / Open shelves / 24.5 kg當前模型T23Laptop platform / Lockable drawer / 24.9 kgT25Programming supply / Lockable drawer / 3-in castersT26Tool storage / 36 kg / 4-in castersT27Tool storage / 4 drawers / 39 kg

AUTOOL T22 is selected. Choose another model for a side-by-side comparison.

相對比 AUTOOL 工作坊工具收納系列
產品描述*	T20	T21	T22	T23	T25	T26	T27
使用和儲存
設備安置	For Brake Fluid Bleeder	For Fuel injector Cleaner & Tester	For Programming Power Supply	For Programming Power Supply	For Programming Power Supply	對於工具	對於工具
掛鉤設計	✓	✓	✓	✓	✓	✓	✓
Lockable Drawer	×	×	×	✓	✓	×	×
Rotating Lift Workbench	×	×	×	✓	×	×	×
抽屜數	1	1	×	1	1	3 or 4 drawers reported; confirm selected configuration	4
Construction & Mobility
Rust & Corrosion Resistant Design	✓	✓	✓	✓	✓	✓	✓
360° Rotation Casters	✓	✓	✓	✓	✓	✓	✓
優質材料	✓	✓	✓	✓	✓	✓	✓
Steel Plate Structure	✓	✓	✓	T23 steel plate construction with a stated 1.2 mm shelf plate; confirm the selected configuration	✓	✓	✓
腳輪尺寸	4英寸	4英寸	4英寸	4英寸	3英寸	4英寸	4英寸
尺寸和容量
產品尺寸	52 * 67 * 100cm	58 * 78 * 100cm	53 * 74 * 102cm	53 * 74 * 102cm	440×740×1000毫米	53 * 75 * 100.5cm	53 * 75 * 100cm
重量（KG）	22.5	30.2	24.5	24.9	23	36	39
負載能力	100KG	100KG	100KG	100KG	100KG	100KG	100KG

手冊和支持

Get Assembly and Replacement-Part Support

AUTOOL automotive service tool cart installation instruction manual preview

手冊/PDF

AUTOOL T22 User Manual

Open the PDF manual for T22 cart assembly, three-tier equipment placement and securing-strap use, with caster safety and troubleshooting support.

快速入門指南

AUTOOL T22 packing list showing caster wheels side panels shelves handrail hooks fasteners and assembly parts

包裝內容

Check Cart Parts and Assembly Hardware

Cart PanelsSide panels, top, middle and bottom storage levels, support panels, and frame components.
Mobility PartsCaster wheels and wheel-mounting hardware.
收納配件Handrail, hooks, securing-strap parts, and small side-storage components.
緊固件Screws, nuts, washers, and assembly accessories.
文档Installation manual for the AUTOOL T22 cart.

常見問題

Load, Storage and Assembly Questions

是什麼 AUTOOL T22 Rolling Tool Cart Used For?

AUTOOL T22 is used for automotive repair, diagnosis, programming power supply storage, laptop placement, spare parts storage, professional tool organization, and vehicle battery placement. It helps keep the workshop area cleaner and more orderly during service work.

What Is The Difference Between T22 And T23?

T22 is an open layered cart for programming power supply setup and does not include a lockable drawer or rotating lift workbench. T23 is also designed for programming power supply use, but the series comparison chart shows it includes a lockable drawer and rotating lift workbench.

Can T22 Hold A Programming Power Supply And Laptop?

Yes. The layered storage design is tailored for electronic devices and automotive components. It can hold a laptop, programmable power supply, professional tools, and vehicle battery when used properly and within the safe load range.

What Is The Load Capacity Of The T22 Cart?

The dedicated T22 specification panel lists load bearing as ≤300kg / 661 lbs. Do not overload the cart. If your use depends on exact load capacity or batch specifications, confirm with AUTOOL Store before ordering.

T22 has a stated 100 kg load-bearing value. Distribute equipment across the three levels, keep heavy items low, and do not treat the figure as a per-tier or moving-load rating.

Does The T22 Cart Require Assembly?

Yes. T22 requires assembly. The design is intended to be easy to assemble without complex tools. Follow the AUTOOL Cart Installation Manual and use the fasteners and parts shown in the package image.

Are The Casters Lockable?

Yes. The cart uses 360° swivel casters, and lockable casters help fix the cart at the work site. The caster material is described as natural rubber to help reduce friction and noise. The dedicated T22 specification panel lists the caster size as 3 inches.

Yes. T22 uses 4-inch 360-degree swivel casters, and the caster locks hold the cart at the work position. Check every wheel and brake after assembly and before loading.

How Should I Maintain The T22 Cart?

Avoid rubbing the cart against rough surfaces.
Frequently check fastened and connected parts, and tighten loose parts in time.
Treat parts exposed to chemical media with anti-corrosion methods such as rust removal and painting when needed.
Store the cart in a dry place and avoid high temperature, humidity, or poor ventilation.

What Accessories Are Included In The Package?

The packing image shows caster wheels, side panels, shelves, handrail, hooks, fasteners, and assembly accessories. Check the delivered components against the image before discarding the packaging.

保固期有多長？