語言和貨幣
AUTOOL 36cm Braided OBD2 Extension Cable
US$10.00
主要特色
- 36 cm 16-Pin Extension
- 10 mm Braided Copper Cable
- Passive Port-Saver
- 36 cm 16-Pin Extension: Extend a standard 16-pin OBD2 vehicle port by 36 cm through a passive male-to-female cable.
- 10 mm Braided Copper Cable: Combine a pure-copper core with a nylon-braided 10.00 mm cable body.
- Passive Port-Saver: Move repeated tool connection to the passive extension cable to reduce wear at the original port.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL OBD2 Cable · 36 cm Braided 16-Pin Extension
Add Working Room Without Long-Cable Clutter
Add 36 cm of working room at a compatible 16-pin vehicle port without long-cable clutter. The braided copper-core extension provides a passive, replaceable connection point for repeated scanner use.
- 36公分工作範圍
- 16針公對母連接線
- Braided Wear Protection
- 單電纜包裝
- 被動訊號路徑
主要特色
Protect a Mid-Length Port Extension
純銅芯
The internal pure copper core helps provide faster data transmission and more stable diagnostic communication between the vehicle and compatible OBD2 tools.
Reinforced Nylon Sleeve
The outside of the cable is covered with a protective nylon braided sleeve for better flexibility, durability, and daily workshop wear resistance.
Flexible Protective Outer Layer
The cable uses flexible protective outer material designed to be environmentally friendly, non-toxic, insulating, and practical for repeated automotive diagnostic use.
Short Extension Design
The 36cm length gives enough extension for easier scanner connection without creating a long cable that takes up extra space inside the vehicle.
Repeated Plug-In Durability
AUTOOL applies an automatic production process and 8 inspection steps from injection to molding. The cable is designed to support over 10,000 plug-in cycles under proper use.
Workshop Protection
The protective sleeve is promoted for flexibility, anti-scalding, waterproof, and anti-aging material performance. Keep the OBD connector contacts dry and clean before plugging into the vehicle or diagnostic tool.
Nylon Sleeve for Daily Handling
A protective nylon braided sleeve improves wear resistance and flexibility around the 10.00mm cable body.
Standard OBD2 Extension
The 16-pin male-to-female cable extends a standard OBD2 vehicle diagnostic port for easier access with compatible diagnostic tools; confirm that both interfaces use the standard 16-pin connection.
36cm of Added Reach
The 360mm extension provides room for scanner connection without a long cable occupying the vehicle interior. Net weight is 120g.
Extension Purpose
Extends the vehicle OBD2 port to make tool connection easier and reduce repeated plug-in wear on the original port.
被動式 OBD2 延長線
將現有的 16 針公對母連接線佈線至規定的長度，以便更方便地放置掃描器或附件；可用功能仍取決於車輛、引腳排列、連接的硬體、軟體和協定支援。
Connection and Fit Notes
Do not sharply bend the cable near the connector or pull the cable by force during use.
Plug and unplug by holding the connector housing instead of pulling the braided cable section.
電纜直徑
電纜直徑：10毫米。
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
如何使用
連接、路由和檢查通信
步驟進展1 / 5
01
確認車輛端口
確定車輛連接器的確切型號、年份和引腳排列；檢查其是否損壞。
02
確認工具鏈
獨立於電纜，驗證掃描器、軟體、協定、模組、任務和任何授權。
03
安全連接
依照車輛和工具的使用步驟操作，正確對齊連接器，切勿強行插入不匹配的插頭。
04
無壓力路線
將電纜遠離踏板、尖銳邊緣、熱源、運動部件和被擠壓的裝飾條。
05
驗證通信
首先執行預期的唯讀連線檢查。如果通訊發生變化，請移除已新增的裝置或分機，然後比較直接連接情況。
安全性和相容性
檢查引腳配合、佈線和功率限制
電纜功能
使用電纜進行實體連接和路由；協定和診斷功能來自車輛和連接的工具。
匹配引腳圖和工具
將連接器和引腳佈線與車輛和診斷工具進行配對。
車輛移動
確保所有電纜和設備部件遠離踏板、方向盤、座椅滑軌、車門和駕駛控制裝置。
電氣負載
請勿將來路不明或高電流設備連接到車輛診斷電源。請遵守車輛和工具的電流限制。
如果系統不穩定，請斷開連線。
如果工具斷開連接、過熱、重設或改變車輛行為，請停止操作並返回已知的直接連接。
論文規範
確認介面、長度和數量
| 規格 | 價值 |
|---|---|
| 總長: | 36厘米 |
| 連接器路線 | 16針公頭 → 16針母頭 |
| 包裝數量 | 1電纜 |
| 功能 | 無源物理擴展/引腳佈線；無需協議轉換 |
手冊和支持
確認連接埠、引腳排列和工具適配性
手冊下載中心
Visit the manual download center for connected-tool guidance, then confirm 16-pin fit, 36-centimeter routing and signal compatibility, with safe-use and troubleshooting guidance.
包裝內容
One Braided Diagnostic Extension Cable
- 附帶電纜1條電纜；36公分；16針公頭→16針母頭。
- 不包括診斷掃描器、軟體、許可證、車輛和未列出的適配器均不包含在內。
- 包含的組件一 AUTOOL 36cm OBD2 extension cable and one product package bag.
- 小包裝Product package bag
- 不包括No extra adapters, scanner, or diagnostic device are included.
常見問題
連接器、適配器和功能問題
Is This Cable A Diagnostic Scanner?
這款延長線可增加車輛 OBD2 連接埠與相容診斷工具之間的連接距離；連接的工具可提供程式碼讀取和診斷功能。
What Diagnostic Tools Can It Work With?
It is suitable for compatible diagnostic tools with a standard OBD2 16-pin socket, including Launch Easydiag, THINKDIAG, THINKDRIVER, ELM327, and similar OBD2 devices. Please confirm the connector type before ordering.
電纜有多長？
The cable length is 360mm / 14.1 inch. The connector width is about 40mm / 1.57 inch, the cable diameter is 10.00mm, and the cable weight is about 120g.
使用什麼材料？
The cable uses a pure copper core for stable signal transmission and a reinforced nylon braided sleeve over a flexible protective outer layer. The material design focuses on flexibility, insulation, durability, and daily workshop protection.
Can It Help Protect The Vehicle OBD Port?
Yes. By using the extension cable between the vehicle OBD2 port and the diagnostic tool, you can reduce repeated direct plugging and unplugging on the original vehicle OBD socket. Always plug and unplug by holding the connector housing.
包裹內包含哪些物品？
包裝內含 1 × AUTOOL 36cm OBD2 male-to-female extension cable. No extra adapter, scanner, or diagnostic device is included.
How Should I Use The Cable Correctly?
Connect the male end to the vehicle OBD2 port, then connect the female end to a compatible diagnostic tool. Avoid sharp bending near the connector, do not pull the cable by force, and keep the connector contacts dry and clean.
此線纜是否具備診斷功能？
不，它只會改變連接距離、佈線方式、連接器形狀或插座數量。可用功能取決於車輛、引腳排列、掃描器、軟體、協定和授權情況。
客戶評價
留言
還沒有評論率先分享您使用此產品的體驗。