語言和貨幣
AUTOOL 20cm Braided OBD2 Extension Cable
US$10.00
主要特色
- 20 cm 16-Pin Extension
- 10 mm Braided Copper Cable
- Port-Saver Connection
- 20 cm 16-Pin Extension: Extend a standard 16-pin OBD2 port by 20 cm through a passive male-to-female cable.
- 10 mm Braided Copper Cable: Combine a pure-copper core with a reinforced nylon-braided 10.00 mm cable body.
- Port-Saver Connection: Move repeated scanner plugging to the extension cable to reduce strain on the vehicle port.
- 3 年保用期 主機保固 3 年，配件保固 1 年
- 90日返回 符合條件的退貨可在 90 天內進行
- 官方店鋪 正品 · 直接支持
AUTOOL OBD2 Cable · 20 cm Braided 16-Pin Extension
Protect a Compact Port-Saver Connection
Create a compact replaceable connection point 20 cm from a tight vehicle port with a braided copper-core OBD2 extension. Its passive male-to-female path adds access without long-cable clutter.
- 20公分工作範圍
- 16針公對母連接線
- Braided Wear Protection
- 單電纜包裝
- 被動訊號路徑
主要特色
Add 20 cm Reach Without Loose Cable
Reinforced Nylon Braided Sleeve
The outer reinforced nylon sleeve helps improve wear resistance, flexibility, pulling resistance, and connector protection compared with ordinary soft OBD cables.
純銅芯
The internal pure copper core supports stable and reliable data transmission between the vehicle OBD2 port and the connected diagnostic tool.
Flexible Insulated Jacket
The flexible insulated outer jacket is designed for easy bending, water resistance, heat resistance, anti-aging protection, and safer daily handling.
Short Extension Design
The 20cm length extends the OBD2 port without leaving excessive cable slack, making it practical for tight dashboards and frequent diagnostic work.
Protects Ports And Tools
Using an extension cable helps reduce repeated direct plugging into the vehicle OBD port and can help protect scanner connectors from strain.
Quality-Checked Manufacturing
AUTOOL applies an inspection workflow from injection to molding to help the cable withstand repeated plugging, with durability designed for more than 10,000 plug cycles.
Reinforced Short Cable
The nylon braided sleeve protects the 10.00mm cable body from wear and repeated handling, with a compact 105g build.
Male-to-Female OBD2 Extension Cable
Make sure your vehicle and diagnostic tool use a standard automotive OBD2 16-pin connector before ordering.
The cable connects standard automotive 16-pin OBD2 ports and compatible diagnostic tools.
被動式 OBD2 延長線
將現有的 16 針公對母連接線佈線至規定的長度，以便更方便地放置掃描器或附件；可用功能仍取決於車輛、引腳排列、連接的硬體、軟體和協定支援。
Scanner Function Dependency
Reading codes, live data, reset functions, and special functions depend on the connected scanner and vehicle system, not the cable itself.
電纜處理
Avoid sharply bending the connector ends or pulling the cable by force, especially when the diagnostic tool is connected.
電纜尺寸
Cable diameter: 10mm.
連接器寬度：40mm。
3年保固支持
主機：三年保固。標準配件：一年保固。保固政策。
如何使用
連接、路由和檢查通信
步驟進展1 / 5
01
確認車輛端口
確定車輛連接器的確切型號、年份和引腳排列；檢查其是否損壞。
02
確認工具鏈
獨立於電纜，驗證掃描器、軟體、協定、模組、任務和任何授權。
03
安全連接
依照車輛和工具的使用步驟操作，正確對齊連接器，切勿強行插入不匹配的插頭。
04
無壓力路線
將電纜遠離踏板、尖銳邊緣、熱源、運動部件和被擠壓的裝飾條。
05
驗證通信
首先執行預期的唯讀連線檢查。如果通訊發生變化，請移除已新增的裝置或分機，然後比較直接連接情況。
安全性和相容性
檢查引腳配合、佈線和功率限制
Passive Hardware
Extends the physical OBD2 connection while the connected scanner provides diagnostic functions.
Pinout And Fit
Match the connector and pinout to the vehicle port and diagnostic tool before connection.
車輛移動
確保所有電纜和設備部件遠離踏板、方向盤、座椅滑軌、車門和駕駛控制裝置。
電氣負載
請勿將來路不明或高電流設備連接到車輛診斷電源。請遵守車輛和工具的電流限制。
如果系統不穩定，請斷開連線。
如果工具斷開連接、過熱、重設或改變車輛行為，請停止操作並返回已知的直接連接。
論文規範
確認介面、長度和數量
| 規格 | 價值 |
|---|---|
| 總長: | 20厘米 |
| 連接器路線 | 16針公頭 → 16針母頭 |
| 包裝數量 | 1電纜 |
| 功能 | 無源物理擴展/引腳佈線；無需協議轉換 |
手冊和支持
確認連接埠、引腳排列和工具適配性
手冊下載中心
Visit the manual download center for connected-tool guidance, then confirm 16-pin fit, compact braided routing and signal compatibility, with safe-use and troubleshooting guidance.
包裝內容
One Selected Cable
- 附帶電纜1 × 20 cm braided cable with a 16-pin male connector and a 16-pin female connector.
- 不包括診斷掃描器、軟體、許可證、車輛和未列出的適配器均不包含在內。
- 包含的組件The package includes one AUTOOL 20cm OBD2 male-to-female extension cable.
- 小包裝零售包裝
- 額外配件No extra adapters or diagnostic tools are included.
常見問題
連接器、適配器和功能問題
這是什麼 AUTOOL OBD2延長線是做什麼用的？
It is used to extend a standard automotive OBD2 16-pin diagnostic port. It helps make scanner connection easier in tight spaces and helps reduce repeated direct plugging into the vehicle OBD port.
Which Diagnostic Tools Can It Work With?
It is suitable for diagnostic tools with a standard 16-pin OBD2 socket, including Launch Easydiag, THINKDIAG, THINKDRIVER, ELM327-style tools, and similar OBD2 scanners. Always confirm the connector shape before ordering.
Does This Cable Add More Diagnostic Functions?
No. This cable extends the physical OBD2 connection. Vehicle coverage and diagnostic functions depend on the connected scanner and vehicle system.
What Connector Type Does It Use?
It uses an OBD2 16-pin male-to-female connector design. One end connects to the vehicle OBD2 port, and the other end connects to the diagnostic tool.
電纜有多長？
The cable length is 200mm, which is about 20cm or 7.87inch. It is designed as a short extension rather than a long cable, helping keep the diagnostic setup compact.
電纜中使用了哪些材料？
The cable uses a pure copper core for stable data transmission, a flexible insulated protective outer jacket, and a reinforced nylon braided sleeve for improved durability, flexibility, and wear resistance.
Can It Be Used On Trucks Or Commercial Vehicles?
It can be used when the vehicle has a standard automotive OBD2 16-pin diagnostic interface. Some commercial vehicles use special or heavy-duty diagnostic connectors, so confirm the port shape before ordering.
包裹內包含哪些物品？
The package includes 1 × AUTOOL 20cm OBD2 16-pin male-to-female extension cable. No diagnostic scanner, adapter set, or extra accessory is included.
How Long Is The Warranty Support?
主機：三年保固。標準配件：一年保固。保固政策。
此線纜是否具備診斷功能？
不，它只會改變連接距離、佈線方式、連接器形狀或插座數量。可用功能取決於車輛、引腳排列、掃描器、軟體、協定和授權情況。
客戶評價
留言
還沒有評論率先分享您使用此產品的體驗。