AUTOOLotoolstore.com
Kaynak: https://autoolstore.com/product/autool-sdt103-automotive-smoke-machine-leak-detector-for-evap-system-12v/

AUTOOL SDT103 EVAP Smoke Machine

(145 Müşteri yorumları)

US$90.00

Bu ürün şu anda tükendi!

Endişelenmeyin! Lütfen e-posta adresinizi girin ve ürün stoklarımıza girdiğinde sizi hemen bilgilendireceğiz.

Harika! Bu ürün için bekleme listesine eklendiniz. Lütfen gelen kutunuzu kontrol edin ve bekleme listesine aboneliğinizi onaylayın.

  • 3-Yıl Garanti Ana ünite 3 yıl · Aksesuarlar 1 yıl
  • 90 Günü İadesi 90 gün içinde iade edilebilir.
  • Resmi Mağaza Orijinal ürünler · Doğrudan destek

AUTOOL SDT103 · External-Air Automotive Smoke Leak Detector with Flow Meter

Control Smoke Flow with Regulated Shop Air

Connect regulated shop air, view current airflow on the meter, and adjust smoke delivery for the selected low-pressure test. SDT103 provides fixed 3.2 kPa / 0.46 psi EVAP output, an airbag adapter for compatible openings, and compact grouped controls for workshop leak tracing when a built-in pump is not required.

  • External Shop-Air Input
  • 3.2 kPa / 0.46 psi Output
  • Visible Airflow Meter
  • Adjustable Smoke Delivery
  • Airbag Adapter For Openings
AUTOOL SDT103 duman kaçağı dedektörü

Ana Özellikler

Adjustable Smoke with a Visible Flow Meter

EVAP-Focused 3.2 kPa / 0.46 psi Testing

SDT103 regulates output to 3.2 kPa / 0.46 psi for low-pressure EVAP smoke testing, helping reduce excessive-pressure risk; confirm that this pressure matches the vehicle procedure before connection.

Visual Airflow Meter

The external flow meter shows the current airflow, making it easier to adjust smoke output and protect the system under test.

Ayarlanabilir Duman Akışı

The airflow regulator helps adjust smoke flow for different test lines. Avoid excessive pressure and use the minimum practical airflow for the test.

Quick Smoke Generation

The unit generates smoke quickly to improve leak-check efficiency. Actual line filling time depends on line volume, adapter setup, airflow, and test conditions.

External-Air Setup

SDT103 accepts shop air or an external compressor through its air-source interface, then lets you monitor and adjust airflow at the unit.

Airbag Adapter Sealing Support

The airbag adapter supports test-port sealing during leak checks.

Engine, Lines, Vehicle Sealing and Fuel-Tank Checks

Supports intake system, exhaust system, throttle, intercooler, crankcase, oil seal, and line-fitting leak checks. Can help inspect vehicle sealing areas, fuel-tank leaks, valves that do not close fully, and air or water leak paths for low-pressure smoke checks.

Compact Portable Design

The compact body is designed for carrying, storage, and positioning around the engine bay.

Grouped Controls and Connections

The handle, flow meter, smoke switch, power socket, air source interface, and smoke output are grouped together for quick component identification during setup.

Aşırı Isınma ve Düşük Sıcaklık Koruması

The protection system shuts down power above 75°C and supports operation down to about -20°C.

3 Yıl Garanti Desteği

Ana ünite: 3 yıl garanti. Standart aksesuarlar: 1 yıl garanti. Garanti Politikası.

Nasıl Kullanılır?

Regulate Air, Seal, Check Flow, Add Smoke, and Inspect

Adım ilerleme1 / 7
01

Test Yağı Ekleyin

Fill 10–15 mL baby oil or liquid paraffin into the detector before first use. Do not overfill.

Güvenlik ve Uyumluluk

Use Low Pressure and the Correct Vehicle Procedure

External Air and 12V Power Are Required

SDT103 has no built-in air pump. Connect a shop air supply or external compressor to the air inlet, then connect the unit to a 12V DC vehicle battery before smoke testing.

Test Output Is Fixed at 3.2 kPa / 0.46 psi

SDT103 regulates the incoming air to a fixed 3.2 kPa / 0.46 psi EVAP test output. The compressor supplies air to the unit; its supply pressure is not the pressure applied directly to the test line.

Adjust Airflow Gradually

Start with the airflow regulator near minimum, then increase flow only as needed. Use the flow meter to watch airflow through the connected test line; changing airflow does not increase the unit’s fixed test pressure.

Test yağı dahil değildir.

Test yağı dahil değildir. İlk kullanımdan önce 10-15 ml sıvı parafin veya bebek yağı ekleyin.

Sürekli kullanımı 8 dakika ile sınırlayın.

Do not run SDT103 continuously for more than 8 minutes. Automatic overheat protection shuts off power above 75°C. Let the unit cool before restarting.

Çalışma Sıcaklığı ve Sıcak Yüzeyler

SDT103, -20°C'ye kadar düşük sıcaklıklarda çalışmayı destekler. Yuvarlak metal gövde kullanım sırasında ısınabilir, bu nedenle sıcak yüzeylere doğrudan temas ettirmekten kaçının.

Use Only for Permitted Low-Pressure Systems

Use SDT103 only where low-pressure smoke testing is permitted. Do not use it for direct high-pressure automotive A/C pressure testing or on systems excluded by the vehicle or component service procedure.

Low-Pressure Systems Only

Use SDT103 only for low-pressure systems that the applicable vehicle or component service procedure permits for smoke testing. Do not use it on high-pressure systems or excluded components.

Trace the Smoke Path

Follow the visible smoke path to inspect the leak area. If no smoke appears, verify isolation, valve state and smoke delivery before changing test methods.

Çalışır haldeyken asla yakıt doldurmayın.

SDT103 çalışırken test yağı doldurmayın.

Drain Excess Oil First

Drain excess oil before operation if the unit has been overfilled.

Regulator Changes Airflow Only

Use the airflow regulator to change flow, not test pressure.

Check Procedure Before Smoke Testing

Follow the vehicle or component service procedure before introducing smoke into a system.

Test Sonuçları

Read Airflow and Smoke at the Correct Stage

Airflow Changes

Use airflow change to select the next inspection, then confirm the leak path with smoke or the applicable service test.

Görünür Duman Kaçışı

Prizin kasıtlı olarak açılmış bir yer olmadığından emin olun, ardından ilgili bölgeyi inceleyin, onarın ve tekrar test edin.

Görünür Duman Yok

Fonksiyonel tanıya veya başka bir test yöntemine geçmeden önce erişimi, izolasyonu, valf durumunu ve duman iletimini doğrulayın.

Modelleri Karşılaştır

Compare Flow Monitoring and Air Supply

Model Rehberi

Bir veya daha fazla model seçin. Varsayılan olarak SDT103 seçilidir.

1 model seçildi

AUTOOL SDT103 seçildi. Yan yana karşılaştırma için başka bir model seçin.

SDT103 karşılaştırması

Karşılaştırılması AUTOOL Duman Kaçağı Dedektörleri
Ürün adıSDT103
Duman Çıkışı ve Koruma
Çalışma prensibi
Düşük Oksijenli Yanma
Yağ Dolum Hacmi Testi
10-15ml
Nominal Çıkış Basıncı
3.2 kPa (0.46 psi) machine-rated output; use the target-system procedure.
Nominal Çıkış Akışı
> 10L / dak
Yüksek Sıcaklık Koruması
75°C'nin üzerinde çalışmayı durdurur.
Tepki Süresi
5 saniyede duman çıkarır.
Güç ve Fiziksel Boyut
Giriş gücü
DC12V / 5A
Artan güç
48W
Net Ağırlık (Ana Ünite)
1.15kg
Ana Ünite Boyutları
180mm * 100mm * 135mm
İzleme ve Kontroller
Akış Ölçer Penceresi
Basınç ölçer
×
Hava Kaynağı Türü
Dış Hava Kaynağı
Mod Çıkışı
Duman Modu
Çift Basınç Modu
×
Akış Ayar Düğmesi
Yağ Tahliye Vanası
×
Arıza Gösterge Işığı
×
Yağ seviye göstergesi
×

Kullanım Kılavuzu ve İndirmeler

Kurulum ve basınç testi için kullanım kılavuzuna bakın.

AUTOOL SDT103 user manual preview
Kullanım Kılavuzu / PDF

AUTOOL SDT103 Kullanım Kılavuzu

Open the PDF manual for SDT103 shop-air connection, flow adjustment, permitted low-pressure smoke tests, adapter setup, test-oil safety, and troubleshooting.

AUTOOL SDT103 paket içeriği

paket

Neler Dahil?

  • Ana ÜniteAUTOOL SDT103 duman kaçağı dedektörü
  • Perakende kutusuSDT103 retail box
  • Güç kablosu12V DC akü kelepçe kablosu
  • Duman HortumuDuman çıkış hortumu
  • AdaptörlerCone adapter, intake airbag adapter, red connector, and short hose
  • Yağ şişesiBoş yağ şişesi dahildir; test yağı dahil değildir.
  • DökümanlarAUTOOL SDT103 user manual

SSS

Flow Meter, EVAP, and Air Questions

Does SDT103 Have a Built-In Air Pump?

Hayır. AUTOOL SDT103 does not have a built-in air pump. It must be connected to an external air source or shop air compressor before use.

SDT103 hangi güç kaynağına ihtiyaç duyar?

SDT103 requires a 12V DC vehicle battery power supply. SDT103 input power is 12V DC / 5A.

What Testing Oil Should I Use?

Test yağı olarak sıvı parafin veya bebek yağı kullanın. Test yağı pakete dahil değildir; kullanmadan önce sıvı parafin veya bebek yağını hazır bulundurun.

Ne Kadar Test Yağı Eklemeliyim?

Add 10–15 mL testing oil before first use. Do not exceed this range, and do not add more than 15 mL at one time. If too much oil is added, drain excess oil before operating the unit.

When Should I Refill the Oil?

Refill only when the smoke becomes thin. Before adding fresh oil, pour out the remaining oil in the detector and replace the testing oil regularly.

Can SDT103 Test EVAP Systems?

Yes. SDT103 is designed for EVAP low-pressure smoke leak detection. Its output pressure is 3.2 kPa / 0.46 psi to help prevent EVAP lines from being damaged by excessive pressure.

How Do I Control Smoke Flow?

Before use, gently open the airflow regulator valve. The flow meter shows the current airflow, and the regulator lets you adjust smoke flow for different test lines.

SDT103 ne kadar süreyle kesintisiz çalışabilir?

Do not run the detector continuously for more than 8 minutes. Allow the unit to rest between tests.

What Happens If SDT103 Gets Too Hot?

If the unit exceeds 75°C, automatic overheat protection turns off the power. Wait until the unit cools before operating it again. The round metal housing can become hot, so avoid direct contact.

What Systems and Vehicles Can SDT103 Test?
  • Systems: EVAP, intake, exhaust, sealing, line fittings, fuel tank, crankcase, oil seals, intercooler, throttle, and intake-duct gasket paths.
  • Other visible paths: Valves that do not close fully and permitted air/water leaks. 12 V vehicle types: Cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats.
Can SDT103 Directly Test High-Pressure A/C System Leaks?

No. SDT103 is a low-pressure smoke leak detector and should not be used as a direct high-pressure automotive A/C pressure tester. Use it only where the applicable vehicle or component service procedure permits low-pressure smoke testing.

Why Does Smoke Start Quickly While the Test Line Takes About 30 Seconds to Fill?

The unit begins producing smoke in about 5 seconds, while the line under test may take about 30 seconds to fill, depending on system volume. Actual fill time depends on line volume, adapter sealing, airflow setting, oil condition, and test setup.

Pakete hangi aksesuarlar dahildir?

Check the product listing or your selected package option for the exact items included. The package includes the SDT103 main unit, retail box, 12V DC battery clamp cable, smoke hose, cone adapter, and intake airbag adapter. It also includes an empty oil bottle, red connector, short hose, and user manual. Testing oil is not included.

How Is SDT103 Different from Other AUTOOL Smoke Leak Detector Models?

SDT103 is an EVAP-focused external-air-source model with visual airflow monitoring. Other AUTOOL models vary by air source, gauges, output pressure and flow, and available Air / Smoke modes. Depending on the model, they may also add dual-pressure control, an oil drain valve, a fault indicator, an oil level gauge, or different accessories. Compare the model chart before ordering.

Garanti süresi ne kadar?

Ana ünite: 3 yıl garanti. Standart aksesuarlar: 1 yıl garanti. Garanti Politikası.

Yorumlar

  1. QL

    Quentin Laurie ✓ Onaylanmış Satın Alma -

    Works great, lots of smoke.

    Works great, lots of smoke. Beware the heated mineral/baby oil will stink up your garage for a long time. So bad I am unable to use this inside my garage. In storage the smell is still so bad, I have to store this outside.

    For the money I am satisfied. Still could not find the Evap leak on my 2005 Suburban, but not the fault of the machine. Think the leak may be on the top of the gas tank where I cannot see the evap lines.

    The pressure gage is a must. It is missing on other similar priced smoke machines. Tells you there is a leak if the ball does not fall to the bottom. To test, close off the smoke tube and it will go to the bottom

    SDT60 SMOKE LEAK DETECTOR
    0 of 0 bu incelemeyi yararlı buldum
  2. E

    Ethan ✓ Onaylanmış Satın Alma -

    Muy practice para encontrar fugas.

    Muy practice para encontrar fugas.
    Solo la calidad de los caimanes que se conectan a la batería es muy baja se rompen con facilidad.

    0 of 0 bu incelemeyi yararlı buldum
  3. OG

    Omar Gissing ✓ Onaylanmış Satın Alma -

    Le produit a été livré dans son emballage d'origine dans ma boîte aux lettres…

    Le produit a été livré dans son emballage d’origine dans ma boîte aux lettres, dans les délais normaux. La notice indiquait qu’il s’agissait d’une huile de massage pour bébés, j’ai donc passé commande et reçu le lendemain 1 litre de liquide fumigène pour le tester.

    0 of 0 bu incelemeyi yararlı buldum
İnceleme bırak

E-posta adresiniz yayınlanmayacaktır. Zorunlu alanlar * ile işaretlenmiştir .

Ekstra İndirim Alın