AUTOOLotoolstore.com
Kaynak: https://autoolstore.com/product/autool-sdt101-car-smoke-leak-detector-pipe-diagnostic-tool/
🔍
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
AUTOOL SDT101 Auto Smoke Leak Detector
AUTOOL SDT101 Auto Smoke Leak Detector
AUTOOL CT450 Ultrasonik Yakıt Enjektör Temizleyici
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
AUTOOL CT450 Ultrasonik Yakıt Enjektör Temizleyici
AUTOOL SDT101 Auto Smoke Leak Detector
AUTOOL SDT101 Auto Smoke Leak Detector
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
  1. AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
  2. AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
  3. AUTOOL SDT101 Auto Smoke Leak Detector
  4. AUTOOL SDT101 Auto Smoke Leak Detector
  5. AUTOOL CT450 Ultrasonik Yakıt Enjektör Temizleyici
  6. AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
  7. AUTOOL CT450 Ultrasonik Yakıt Enjektör Temizleyici
  8. AUTOOL SDT101 Auto Smoke Leak Detector
  9. AUTOOL SDT101 Auto Smoke Leak Detector
  10. AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
  11. AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
AUTOOL SDT101 Auto Smoke Leak Detector
AUTOOL SDT101 Auto Smoke Leak Detector
AUTOOL CT450 Ultrasonik Yakıt Enjektör Temizleyici
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
AUTOOL CT450 Ultrasonik Yakıt Enjektör Temizleyici
AUTOOL SDT101 Auto Smoke Leak Detector
AUTOOL SDT101 Auto Smoke Leak Detector
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine

AUTOOL SDT101 Low-Pressure EVAP Smoke Machine

(132 Müşteri yorumları)

US$80.00

Ana Özellikler
  • Fixed 0.46 psi Output
  • External-Air Workshop Setup
  • Visual Leak Tracing
  • About 5-Second Startup
Ana Özellikler
☰ TOPLU / B2B TEKLİFİ İSTEYİNResmi Teklif Talebi
  • 3-Yıl Garanti Ana ünite 3 yıl · Aksesuarlar 1 yıl
  • 90 Günü İadesi 90 gün içinde iade edilebilir.
  • Resmi Mağaza Orijinal ürünler · Doğrudan destek

AUTOOL SDT101 · Automotive Smoke Leak Detector for External-Air Low-Pressure Testing

Run Controlled Low-Pressure Smoke Tests with Shop Air

Connect an existing shop-air supply, regulate output to 3.2 kPa / 0.46 psi, and trace smoke escaping from a correctly isolated low-pressure test section. The compact external-air design starts producing smoke in about five seconds and suits permitted EVAP and related checks when a built-in pump is unnecessary.

  • Harici Atölye Hava Girişi
  • 3.2 kPa / 0.46 psi Çıkış
  • Yaklaşık 5 Saniyede Duman Başlangıcı
  • 1.6 kg Main Unit
  • Operation Down To -20°C
AUTOOL SDT101 duman kaçağı dedektörü

Ana Özellikler

Fixed 3.2 kPa Output with External Air Supply

Fixed Low-Pressure Control

The built-in controller regulates vehicle-side output to 3.2 kPa / 0.46 psi for EVAP-focused and other permitted low-pressure checks. The external compressor supplies air to the machine; its supply pressure is not applied directly to the test line.

External-Air Workshop Setup

Connect SDT101 to an existing shop-air supply or external compressor; the unit regulates that supply to its fixed low-pressure output for EVAP testing. This configuration suits work areas that already have compressed air and do not need a built-in pump.

Visual Leak Tracing

Check whether a permitted low-pressure EVAP, fuel-tank, or vapor-line leak may explain the fault before replacing parts. After correct connection and isolation, escaping smoke can reveal a path for closer inspection.

About Five-Second Smoke Startup

Smoke begins in about five seconds once the prepared unit is connected and activated.

Compact Handled Body

SDT101’s compact handled body and 1.6 kg main-unit weight make it easier to position, use, carry, and store around an equipped work area than larger smoke leak detectors.

Grouped Controls and Ports

The handle, smoke switch, power indicator, air inlet, and smoke outlet are grouped on the compact body so the main controls and connections are easy to identify during setup.

Sıcaklık Koruması

The unit supports operation down to -20°C, and automatic overheat protection shuts off power above 75°C. Allow the metal housing to cool before handling or restarting after protection activates.

Maintenance-Friendly Oil Routine

Use liquid paraffin or baby oil, fill 10–15 mL before first use, and add fresh oil only when smoke becomes thin. Drain residual oil before a refill and do not exceed 15 mL at one time.

Intake, Exhaust, Sealing and Line Fittings

Supports intake system tests, exhaust system tests, throttle leaks, intake air duct gasket leaks, and exhaust leak checks. Can help locate crankcase leaks, front and rear oil seal leaks, intercooler air leaks, valves that do not close fully, and line-fitting leaks. Smoke can help visually identify certain air and water leakage paths where the applicable vehicle or component service procedure permits smoke testing.

3.2 kPa / 0.46 psi EVAP-Safe Pressure

SDT101’s built-in pressure controller fixes output at 3.2 kPa / 0.46 psi for EVAP system testing and other permitted low-pressure line leak checks, helping prevent excessive pressure from damaging EVAP lines.

Duman yaklaşık 5 saniye içinde çıkmaya başlar.

Once the unit is connected and ready, smoke starts in about 5 seconds for visual leak location.

3 Yıl Garanti Desteği

Ana ünite: 3 yıl garanti. Standart aksesuarlar: 1 yıl garanti. Garanti Politikası.

Nasıl Kullanılır?

Regulate Air, Seal the System, Add Smoke, and Inspect

Adım ilerleme1 / 6
01

Confirm the Test Procedure

Identify the target system, its permitted test pressure, the correct access point, and any valves or normal openings that must be controlled or sealed. SDT101 is for low-pressure procedures within its fixed 0.46 psi output.

Güvenlik ve Uyumluluk

Confirm Air Quality, System Limit, and Test Procedure

External Air Is Required

Connect SDT101 to suitable shop air; the machine regulates the supply to a 3.2 kPa / 0.46 psi test output.

Low-Pressure Test Scope

SDT101 provides a regulated low-pressure smoke output for approved systems, including EVAP applications.

Use the Specified Oil

Testing oil is not included. Use liquid paraffin or baby oil in the stated 10–15 mL quantity, and never refill while the unit is operating or hot.

Observe Heat and Duty Limits

Do not run continuously for more than eight minutes. If overheat protection stops the unit, switch off and allow it and its metal housing to cool before handling or restarting.

Confirm Power and Connections

Use a 12V DC battery connection with correct polarity. Check that the hose, access adapter and isolated system are secure before starting smoke generation.

Interpret Results with the Vehicle Procedure

Escaping smoke supports leak localization. A no-smoke result may require checking the access point, isolation, valve state, blockage, intermittent behavior or a non-leak cause.

Çalışır haldeyken asla yakıt doldurmayın.

SDT101 çalışırken test yağı doldurmayın.

Separate Supply and Test Pressure

Do not use compressor supply pressure as the test-line pressure value.

Yeniden başlatmadan önce soğutun

Aşırı ısınma koruması devreye girdikten sonra yeniden başlatmadan önce cihazın soğumasını bekleyin.

Test Sonuçları

Read Smoke Only After the System Is Prepared

Smoke Escapes at a Joint or Seal

Inspect the exact area, confirm that the smoke is not leaving through an intentionally open path, repair the verified leak and repeat the same test.

Smoke Leaves a Normal Vent or Open Path

Review the service procedure and valve state before calling it a fault. EVAP testing often depends on controlling normal purge or vent paths.

Görünürde duman yok.

Recheck the connection, system isolation and smoke delivery. If setup is correct, continue with the applicable functional diagnosis because blockage, an intermittent fault or a non-leak failure may not create a visible plume.

Modelleri Karşılaştır

Compare Built-In and External-Air Models

Model Rehberi

Bir veya daha fazla model seçin. Varsayılan olarak SDT101 seçilidir.

1 model seçildi

AUTOOL SDT101 seçildi. Yan yana karşılaştırma için başka bir model seçin.

SDT101 karşılaştırması

Karşılaştırılması AUTOOL Duman Kaçağı Dedektörleri
Ürün adıSDT101
Duman Çıkışı ve Koruma
Çalışma prensibi
Düşük Oksijenli Yanma
Yağ Dolum Hacmi Testi
10-15ml
Nominal Çıkış Basıncı
3.2 kPa (0.46 psi)
Nominal Çıkış Akışı
> 10L / dak
Yüksek Sıcaklık Koruması
75°C'nin üzerinde çalışmayı durdurur.
Tepki Süresi
5 saniyede duman çıkarır.
Güç ve Fiziksel Boyut
Giriş gücü
DC12V / 5A
Artan güç
48W
Net Ağırlık (Ana Ünite)
1.6kg
Ana Ünite Boyutları
180mm * 100mm * 135mm
İzleme ve Kontroller
Akış Ölçer Penceresi
×
Basınç ölçer
×
Hava Kaynağı Türü
Dış Hava Kaynağı
Mod Çıkışı
Duman Modu
Çift Basınç Modu
×
Akış Ayar Düğmesi
×
Yağ Tahliye Vanası
×
Arıza Gösterge Işığı
×
Yağ seviye göstergesi
×

Kullanım Kılavuzu ve İndirmeler

Kurulum ve basınç testi için kullanım kılavuzuna bakın.

AUTOOL SDT101 kullanım kılavuzu önizlemesi
Kullanım Kılavuzu / PDF

AUTOOL SDT101 Kullanım Kılavuzu

Open the PDF manual for SDT101 shop-air connection, regulated low-pressure smoke tests, system isolation, test-oil handling, safety, maintenance, and troubleshooting.

İNDİR KILAVUZ
AUTOOL SDT101 paket içeriği

paket

Neler Dahil?

  • Ana Ünite1 × AUTOOL SDT101 smoke leak detector.
  • EVAP Connector1× EVAP special connector.
  • Standart Adaptör1× standard cone adapter.
  • Güç kablosu1× power cord clamp for a 12V DC battery connection.
  • Valf Aleti1× valve-core wrench.
  • Yeniden Dolum Şişesi1× empty testing-oil refill bottle; testing oil is not included.
  • Duman Hortumu1× smoke hose.
  • Documentation and Box1× user manual and SDT101 retail box.

SSS

Shop Air, Pressure, and Adapter Questions

SDT101'te dahili hava pompası var mı?

No. SDT101 does not have a built-in air pump. It must be connected to an external air source or shop air supply before testing.

  • No. It requires an external air source or shop-air supply. Its internal controller regulates the vehicle-side output to 3.2 kPa / 0.46 psi.
Why Is SDT101 Well Suited to EVAP Leak Testing?

SDT101 regulates its output to a fixed 3.2 kPa / 0.46 psi. This low pressure is designed for EVAP system testing and helps avoid excessive pressure on EVAP lines.

  • Its defining feature is a fixed 0.46 psi low-pressure output. Confirm that this pressure and the connection procedure are appropriate for the vehicle being tested.
What power and smoke fluid does it need?

Use a 12V DC battery connection and 10–15 mL of liquid paraffin or baby oil. Testing oil is not included.

Can it test high-pressure or boosted systems?

SDT101 is a low-pressure smoke tester and should not be presented as a high-pressure or boost-leak machine. Select a model and procedure designed for the required pressure.

SDT101 ne kadar süreyle kesintisiz çalışabilir?

Do not operate the detector continuously for more than 8 minutes. Let it rest between uses.

  • Limit continuous operation to eight minutes. Let the unit cool before another cycle, especially if thermal protection has activated.
Does visible smoke prove which component failed?

It identifies an escape path for inspection. Confirm the leaking joint, hose, seal or component and complete the vehicle’s diagnostic procedure before replacing parts.

What if no smoke appears outside the system?

Görünür dumanı kullanarak sızıntı bölgesini tespit edin, ardından onarımı yapın ve tekrar test edin. Duman görünmezse, devam etmeden önce izolasyonu, akışı ve test düzeneğini tekrar kontrol edin.

Pakete hangi aksesuarlar dahildir?

The package includes the SDT101 main unit, EVAP connector, standard cone adapter, power cable, valve-core wrench, empty oil refill bottle, smoke hose, user manual, and retail box. Testing oil and an external air source are not included.

SDT101 hangi güç kaynağına ihtiyaç duyar?

SDT101 requires a 12V DC battery connection. Connect the power cord clamp to a 12V DC vehicle battery before switching on the detector.

Hangi test yağını kullanmalıyım?

Use liquid paraffin or baby oil as testing oil. Testing oil is not included, so have the selected oil ready before use.

Ne Kadar Test Yağı Eklemeliyim?

Add 10–15 mL testing oil before first use. Do not exceed this range. Fresh oil should be added only when the smoke becomes thin, and no more than 15 mL should be added each time. Before adding fresh oil, pour out the remaining oil in the detector.

Can SDT101 Detect Very Small Line Leaks?

SDT101 helps locate small low-pressure line leaks by filling the test area with smoke and showing where it escapes. Confirm the leak using the service procedure for the system being tested.

SDT101 Hangi Sistemleri Test Edebilir?

SDT101 supports low-pressure smoke checks for EVAP, intake, exhaust, vehicle sealing areas, line fittings, and fuel tank systems. It can also check crankcase leaks, front and rear oil seals, intercooler air leaks, throttle leaks, and intake air duct gasket leaks. Smoke can also help trace valves that do not close fully and certain air or water leak paths.

Can SDT101 Be Used for High-Pressure Systems?

No. SDT101 is a low-pressure EVAP smoke leak detector with 3.2 kPa / 0.46 psi output pressure. Do not use it as a high-pressure leak tester.

What Should I Do If Overheat Protection Is Triggered?

The detector automatically shuts off power if the internal temperature exceeds 75°C. Stop operation and allow the unit to cool before restarting. Avoid touching the round metal housing because it may be hot.

How Does SDT101 Differ from SDT100?

SDT101 is an EVAP-focused model that requires an external air source and outputs 3.2 kPa / 0.46 psi low pressure. SDT100 instead uses a built-in air pump for users who do not want to connect shop air.

Nasıl AUTOOL Duman Kaçağı Dedektörü Modelleri Farklı mıdır?

SDT101 and SDT103 are EVAP-focused external-air-source models rated at 3.2 kPa. SDT50, SDT60, SDT100, and SDT106 are built-in pump options. SDT203, SDT205, and SDT205S add combinations of pressure gauges, flow indication, Air Mode / Smoke Mode, and flow control depending on model. SDT206 and SDT208 are models with additional control features, with SDT208 providing Standard Mode at 35 psi and EVAP Mode at 10 psi.

Garanti süresi ne kadar?

Ana ünite: 3 yıl garanti. Standart aksesuarlar: 1 yıl garanti. Garanti Politikası.

Yorumlar

  1. RE

    Rod Eliot ✓ Onaylanmış Satın Alma -

    Me llegó bien en su cajita con dibujo y todo

    Me llegó bien en su cajita con dibujo y todo

    0 of 0 bu incelemeyi yararlı buldum
  2. K

    pisi ✓ Onaylanmış Satın Alma -

    Mükemmel ürün. AAA++

    This product is perfect! The price is cheap too!

    0 of 0 bu incelemeyi yararlı buldum
  3. TH

    Tigran Hovhannisyan ✓ Onaylanmış Satın Alma -

    Fast smoke output

    It requires an external air compressor, but it is very easy to use and the leak was found quickly. I used baby oil for the test oil.

    0 of 0 bu incelemeyi yararlı buldum
İnceleme bırak

E-posta adresiniz yayınlanmayacaktır. Zorunlu alanlar * ile işaretlenmiştir .

AUTOOL SDT101 Low-Pressure EVAP Smoke Machine
AUTOOL SDT101 Low-Pressure EVAP Smoke Machine

US$80.00

Ürünü Görüntüle Bu ürünün birden fazla çeşidi bulunmaktadır. Seçenekler ürün sayfasında seçilebilir Resmi Teklif Talebi
Ekstra İndirim Alın