DİL VE PARA BİRİMİ
İNDİRİM
AUTOOL HTS678 Ceviz Ağacı Kumlama Aleti, Emme Valfi Temizliği İçin, 23 Adaptörlü
Orijinal fiyat şuydu: 1,129.00 ABD Doları.US$999.00Güncel fiyat: 999.00 ABD Doları.
Ana Özellikler
- Controlled Blasting Setup
- 23-Adapter Port Coverage
- HEPA-Filtered Recovery
- Mobil Atölye Sistemi
- Controlled Blasting Setup: A pressure gauge, regulating knob, and Standard / Expert modes help operators monitor and adjust the blasting setup for different cleaning tasks.
- 23-Adapter Port Coverage: A 23-adapter set supports many intake-port shapes and workshop cleaning setups for broader hardware coverage.
- HEPA-Filtered Recovery: Simultaneous spray-and-vacuum recovery with dust and HEPA filtration helps manage walnut media, carbon residue, and fine particulate during cleaning.
- Mobile Workshop System: Built-in storage, a telescoping handle, and 360° casters keep accessories with the machine and make it easier to move between jobs.
- 3-Yıl Garanti Ana ünite 3 yıl · Aksesuarlar 1 yıl
- 90 Günü İadesi 90 gün içinde iade edilebilir.
- Resmi Mağaza Orijinal ürünler · Doğrudan destek
AUTOOL HTS678 · Professional Walnut Sand Blaster
Adjustable Pressure for Controlled Blasting
MKS AUTOOL HTS678 is a professional walnut shell sand blaster with adjustable pressure control for controlled intake carbon cleaning. HTS678 features 1500W rated power, built-in recovery, Standard / Expert operating modes, 23 adapters, and a 10L main-unit capacity. An external compressed-air source and compatible walnut abrasive are required.
- Ayarlanabilir Basınç Kontrolü
- Standard / Expert Mode
- 23 Intake Adapters
- 0.6–1.2 mm Walnut Media
En iyi: professional workshops that want adjustable pressure control, HEPA filtration, and 23 intake adapters for intake-side carbon cleaning.
23 Intake Adapters + Pressure Control
Ana Özellikler
HTS678 combines 23-adapter coverage, adjustable pressure and operating modes, simultaneous spray and recovery, HEPA filtration, intake-side carbon cleaning, workshop mobility, external-air blasting, and product support.
23 Adapters for Broad Intake-Port Coverage
The 23-adapter set supports multiple intake-port shapes and workshop cleaning setups. Match the adapter to the specific engine and intake-port shape before cleaning. The included adapter set fits multiple intake-port shapes, but it is not universal for every engine.
Integrated Spray And Vacuum Recovery
HTS678 sprays walnut abrasive and recovers it by vacuum at the same time, helping reduce scattered media and manual cleanup during intake carbon cleaning.
Built-In Dust Filter + HEPA Filtration
The built-in dust filter and HEPA filtration help manage collected walnut abrasive, carbon residue, and fine particulate during recovery. Recovered abrasive should be reused only when the vehicle service procedure permits it and the media remains suitable for reuse.
Ayarlanabilir Basınç Kontrolü
The pressure regulating knob and pressure gauge help users monitor and adjust blasting pressure for different intake cleaning tasks. Use pressure settings that match the HTS678 instructions, walnut media, air source, and vehicle service procedure.
Controlled Intake Valve Carbon Cleaning
With adjustable pressure control, walnut-shell abrasive helps remove carbon buildup from the intake pipe and the backs of intake valves, leaving the cleaned intake path visibly cleaner. Results vary with airflow, vehicle condition, diagnosis, and the service performed.
Standard Mode / Expert Mode
Choose Standard Mode or Expert Mode based on your experience and the cleaning task. Follow the HTS678 operating instructions when selecting Standard Mode or Expert Mode. Do not activate both modes at the same time.
Mobile Integrated Body
The three-section telescoping handle and 360° swivel casters make the machine easier to move around the workshop, while the storage-box configuration helps keep accessories with the unit.
1500W Rated Power + External Air Source
HTS678 is rated at 1500W for the machine system and built-in recovery, while an external air compressor provides the blasting force for walnut-shell cleaning.
Walnut Media Recovery & Reuse
The recovery and filtration system helps separate collected walnut-shell abrasive from carbon residue so suitable media can be reused. Under normal conditions, walnut-shell abrasive can be reused 5–10 times. Keep the media dry and replace it if it becomes contaminated, clumped, or cleaning performance drops.
3-Year Main Unit Warranty
Ana ünite: 3 yıl garanti. Standart aksesuarlar: 1 yıl garanti. Garanti Politikası.
HTS678 Product Gallery
HTS678 Adjustable-Pressure Walnut Blasting Details
Explore HTS678 Standard / Expert modes, physical walnut-shell cleaning, the 1500W system, 10L media tank, adjustable pressure control, HEPA filtration and media recovery, before-and-after cleaning results, 23-adapter coverage, workshop mobility, specifications, and package contents.
Showing product image 1 of 12.
From Setup to Final Vehicle Check
Adım Adım İş Akışı
HTS678 uses walnut-abrasive impact with simultaneous vacuum recovery. The sequence below covers setup, valve preparation, blasting, media recovery, residual-media inspection, reassembly, leak checks, diagnostic scanning, and a final vehicle check.
01
1. Adım
Inspect And Prepare The Machine
Inspect the machine and organize the working setup before connecting hoses or loading walnut abrasive.
- Inspect the machine and accessories.
- Raise the telescoping rod as needed.
- Access the storage box as needed.
02
2. Adım
Connect And Secure The Recovery Hose
A secure recovery-hose connection keeps the vacuum path stable during blasting.
- Connect the recovery hose.
- Secure the clamp.
03
3. Adım
Choose And Seal The Adapter
Use an adapter that matches the intake-port shape and seals securely so blasting and recovery stay focused on the target port.
- Choose an adapter that matches the intake-port shape.
- Confirm a secure seal.
- Remember that the 23-adapter set is not universal for every engine.
04
4. Adım
Filtreyi Kontrol Edin
Check the filter before loading walnut abrasive so the recovery system is ready for use.
- Inspect the filter cartridge.
- Make sure the lower screen is flat and correctly seated.
05
5. Adım
Add Walnut Abrasive
Load the recommended amount of compatible walnut abrasive and keep it dry for consistent feeding.
- Load 3–5 kg of compatible 0.6–1.2 mm walnut abrasive.
- Keep the walnut abrasive dry.
- Follow the HTS678 loading instructions.
06
6. Adım
Aracı Hazırlayın
Prepare the target intake port before blasting by confirming valve position and isolating the other intake openings.
- Access the target intake port.
- Close the target intake valve.
- Clean one port at a time.
- Isolate the other intake openings according to the vehicle service procedure.
07
7. Adım
Connect Dry Air and Select One Mode
Connect the air and power sources, then select one operating mode for the cleaning task.
- Connect dry, filtered external compressed air.
- AC gücünü bağlayın.
- Select Standard Mode or Expert Mode according to the HTS678 instructions.
- Use only one mode at a time.
08
8. Adım
Blast And Adjust Pressure Gradually
Start conservatively and adjust pressure gradually while monitoring the pressure gauge.
- Insert the blasting gun.
- Start at an appropriate setting.
- Use the pressure gauge and regulating knob to adjust pressure.
- Stay within the limits specified for the HTS678, walnut media, and vehicle service procedure.
09
9. Adım
Recover And Inspect At The Same Time
Recover walnut abrasive while blasting, inspect the result, and repeat only where more cleaning is needed.
- Keep recovery active while blasting.
- Stop and inspect the result.
- Repeat only where more cleaning is needed.
10
10. Adım
Final Vacuum, Purge And Vehicle Check
Finish by removing residual walnut abrasive, reassembling the intake, and completing the final vehicle checks.
- Stop the media flow and vacuum out remaining abrasive.
- Use an air purge when the HTS678 procedure calls for it.
- Inspect the cleaned area for residual media.
- Reassemble the intake.
- Complete leak checks, diagnostic scanning, and a final functional check.
Başlamadan önce
Güvenlik ve Uyumluluk
Before using HTS678, check the external compressor, dry walnut abrasive, cleaning target, adapter seal, intake-valve position, selected operating mode, required personal protective equipment (PPE), and final residual-media recovery steps. Always follow the service procedure for the specific vehicle when it differs from general product guidance.
Harici Kompresör Gereklidir
HTS678 requires an external high-pressure air compressor, which is not included. Use an external compressor with air pressure up to 0.7 MPa; 6 bar or more is generally recommended. Make sure it also provides sufficient continuous airflow and that the air tank, hose, quick-connect fittings, and duty cycle suit the blasting workflow.
Use Dry Filtered Air
Use dry, filtered compressed air. Moisture may cause walnut abrasive to clump or feed inconsistently; a dryer/water-separation setup is recommended.
Compatible Walnut Abrasive
The recommended fill is generally 3–5 kg of 0.6–1.2 mm walnut abrasive. Follow the HTS678 operating instructions for loading and use. Walnut abrasive inclusion may vary by selected package option; check the selected package contents before ordering.
Intake-Side Cleaning Scope
HTS678 is designed for intake-pipe and back-of-intake-valve cleaning. It is not designed for injectors, throttle valves, cylinders, or combustion chambers.
Adapter Match and Sealing
Confirm that one of the supplied 23 adapters fits the target intake port, seals securely, and clears surrounding components.
Vana Kapatma ve Port İzolasyonu
Hedef emme valfinin tamamen kapalı olduğundan emin olduktan sonra püskürtmeye başlayın. Her seferinde bir emme portunu temizleyin ve belirli araç için servis prosedüründe belirtildiği gibi diğer emme açıklıklarını izole edin.
One Operating Mode At A Time
Use Standard Mode or Expert Mode according to the HTS678 operating instructions and the service procedure for the specific vehicle. Use only one operating mode at a time.
Protective Equipment and Walnut-Media Safety
Walnut-shell media can create dust and may trigger allergies. Wear suitable eye and respiratory protection, provide ventilation, and follow the walnut-media supplier Safety Data Sheet (SDS).
Ceviz Aşındırıcısının Yeniden Kullanımı
Ceviz ağacından yapılmış aşındırıcıyı yalnızca ilgili araç için uygulanan servis prosedürü izin verdiğinde ve geri kazanılan aşındırıcı malzeme yeniden kullanıma uygun olduğunda tekrar kullanın.
Residual Media Must Be Recovered
Remove visible residual walnut abrasive before starting the engine instead of relying on it to burn away. Before starting the engine, vacuum out the remaining abrasive and inspect the cleaned area to make sure no visible media remains.
Mekanik Temizlik ve Kimyasal Temizleyici Kılavuzu
Use HTS678 to remove suitable intake deposits; results vary with deposit severity and engine condition.
Modelleri karşılaştır
Karşılaştırmak AUTOOL Walnut Blaster Models
Use this table to compare key specifications and feature differences across the AUTOOL walnut blasting models.
Modelleri karşılaştır
Bir veya daha fazla model seçin. Varsayılan olarak HTS678 seçilidir.
1 model seçildi
Hiçbir model seçili değil. Karşılaştırmak için bir model seçin.
| Özellikler | ModelAUTOOL HTS558 | ModelAUTOOL HTS559 | ModelAUTOOL HTS518 | ModelAUTOOL HTS678 | ModelAUTOOL HTS728 |
|---|---|---|---|---|---|
| Temel operasyon | |||||
| Temizleme Yöntemi | Ceviz Kabuğu Patlatma | Ceviz Kabuğu Patlatma | Ceviz Kabuğu Patlatma | Ceviz Kabuğu Patlatma | Ceviz Kabuğu Patlatma |
| Giriş Gerilimi | 110 / V 220 | 110 / V 220 | 110 / V 220 | 110 / V 220 | 110 / V 220 |
| Anma Frekansı | 50 / 60 Hz | 50 / 60 Hz | 50 / 60 Hz | 50 / 60 Hz | 50 / 60 Hz |
| Artan güç | 1200 W | 1400 W | 1400 W | 1500 W | 1400 W |
| Vakum Emme | 0.02 MPa | 0.02 MPa | 0.02 MPa | 0.02 MPa | > 0.7 MPa |
| Hava akışı | <300 L/min (<0.3 m³/min) | <300 L/min (<0.3 m³/min) | <300 L/min (<0.3 m³/min) | <300 L/min (<0.3 m³/min) | >400 L/min (>0.4 m³/min) |
| Ceviz Kabuğu Aşındırıcı Boyutu | 0.6 – 1.2 mm | 0.6 – 1.2 mm | 0.6 – 1.2 mm | 0.6 – 1.2 mm | 0.4 – 0.6 mm |
| Ana Ünite Kapasitesi | 13 L | 30 L | 30 L | 10 L | 10 L |
| Ürün ağırlığı | 10 kg | 12 kg | 23.5 kg | 52 kg | 50 kg |
| Adaptör Çeşitleri | 5 Türleri | 5 Türleri | 23 Türleri | 23 Türleri | 5 Türleri |
| Workshop hardware | |||||
| External Air Compressor Required | ✓Dahil | ✓Dahil | ✓Dahil | ✓Dahil | ✓Dahil |
| Saklama Kutusu | ×Dahil değil | ×Dahil değil | ✓Dahil | ✓Dahil | ×Dahil değil |
| Basınç ölçer | ×Dahil değil | ×Dahil değil | ×Dahil değil | ✓Dahil | ✓Dahil |
| Basınç Ayarları | ×Dahil değil | ×Dahil değil | ×Dahil değil | Basınç Ayar Düğmesi | Basınç Ayar Düğmesi |
| Modes & filtration | |||||
| Mod Anahtarı | ×Dahil değil | ×Dahil değil | High/Low Mode; Low-Speed Mode | Standard Mode; Expert Mode | Recovery Mode; Filling Mode |
| Built-In Dust Filter | ✓Dahil | ✓Dahil | ✓Dahil | ✓Dahil | ✓Dahil |
| HEPA (High-Efficiency Particulate Air) Filter | ×Dahil değil | ×Dahil değil | ×Dahil değil | ✓Dahil | ✓Dahil |
| Cleaning scope & mobility | |||||
| Combustion-Chamber Cleaning | ×Dahil değil | ×Dahil değil | ×Dahil değil | ×Dahil değil | ✓Dahil |
| 360° Dönebilen Tekerler | ✓Dahil | ✓Dahil | ✓Dahil | ✓Dahil | ✓Dahil |
| Three-Section Telescoping Handle | ×Dahil değil | ×Dahil değil | ✓Dahil | ✓Dahil | ×Dahil değil |
Model kılavuzu
Review the main differences below, then select models above for a side-by-side comparison.
AUTOOL HTS558
A lighter 13L walnut blasting model with five configured adapter types and built-in dust filtering.
AUTOOL HTS559
Keeps 1400W power and a 30L capacity, with five configured adapter types and no storage box.
AUTOOL HTS518
1400W, 30L capacity, 23 configured adapter types, storage box, and telescoping handle.
AUTOOL HTS678
Current model: Adds 1500W rated power, 23 adapter types, a pressure gauge, pressure regulation, HEPA filtration, and storage.
AUTOOL HTS728
Adds combustion-chamber cleaning capability, HEPA filtration, pressure regulation, and higher airflow.
Dahil Olanlar ve Dahil Olmayanlar
Paket İçeriği
The package includes the HTS678 main unit and the accessories listed below. Walnut media may be included depending on the selected package option. The external air compressor is not included. Check the selected package contents before ordering.
- Ana ÜniteAUTOOL HTS678 Walnut Sand Blaster
- Adaptör Seti23 adaptörleri
- Patlatma TabancasıWalnut shell blasting gun
- Hoses And BendsRecovery hose and black bends
- Koruma gözlüğüKoruyucu gözlükler
- Ceviz MedyaWalnut media may be included depending on the selected package option
- Dahil DeğilExternal air compressor (high-pressure air source)
Downloads & Help
Kılavuz ve Destek
Use the HTS678 manual for adapter selection, filter checks, walnut filling, mode operation, air setup, safety, and maintenance. Contact support for package or troubleshooting questions.
AUTOOL HTS678 Kullanım Kılavuzu
Open the PDF manual for HTS678 installation, operation, maintenance, and safety guidance.
Product, Setup & Service Answers
Sıkça Sorulan Sorular
Find answers about walnut abrasive, carbon buildup, compressor requirements, cleaning range, package contents, HTS678 / HTS728 differences, operation notes, and warranty support.
How Does Walnut Sandblasting Work with HTS678?
HTS678 uses processed walnut-shell abrasive as the blasting medium. External compressed air drives the abrasive across the target intake surface, while the recovery system collects spent media and loosened carbon. Use compatible 0.6–1.2 mm walnut abrasive, follow the media Safety Data Sheet (SDS), and wear appropriate personal protective equipment (PPE).
HTS678, emme valflerindeki karbon birikintisini temizleyebilir mi?
HTS678 is designed to remove carbon buildup from supported intake-valve and intake-port surfaces when inspection confirms deposits and the service procedure for the specific vehicle supports walnut blasting. Use the correct adapter, pressure setting, and recovery procedure for the specific engine.
When Should Intake Carbon Deposits Be Cleaned?
Use mechanical cleaning when inspection confirms suitable intake deposits and the vehicle procedure permits it. Service timing and performance results vary with engine condition and deposit severity.
What Air Compressor Does HTS678 Need?
Use an external compressor with air pressure up to 0.7 MPa; 6 bar or more is generally recommended. Also make sure the compressor provides sufficient continuous airflow and dry air, and that the air tank, hose, quick-connect fittings, and pressure settings suit the vehicle and workshop setup.
Is The Air Compressor Included?
No. The external air compressor (high-pressure air source) is not included and must be prepared separately.
Is Walnut Media Included in the Package?
Walnut media inclusion depends on the selected package option. Check the selected package contents before ordering.
How Much Walnut Shell Abrasive Should I Add?
The recommended fill is generally 3–5 kg of 0.6–1.2 mm walnut abrasive for HTS678. Keep the walnut abrasive dry and follow the HTS678 operating instructions for loading and use.
How Does HTS678 Clean Carbon From Intake Valves?
HTS678 cleans carbon from the backs of intake valves one port at a time using walnut blasting, adjustable pressure control, and integrated recovery. Before blasting, make sure the target intake valve is fully closed and isolate the other intake openings according to the service procedure for the specific vehicle.
Can HTS678 Clean Injectors, Throttle Valves, Cylinders, Or Combustion Chambers?
No. HTS678 is designed for intake-pipe and back-of-intake-valve cleaning—not injectors, throttle valves, cylinders, or combustion chambers. Use a tool and cleaning procedure specifically designed for those other cleaning tasks.
Where Can I Compare HTS678 and HTS728?
Kullan AUTOOL Walnut Blaster Model Comparison table above to compare HTS678 and HTS728 across rated power, capacity, adapters, pressure controls, operating modes, filtration, and combustion-chamber capability.
Where Can I Compare HTS558, HTS559, HTS518, HTS678, and HTS728?
Kullan AUTOOL Yukarıdaki ceviz temizleme cihazı model karşılaştırma tablosu, HTS558, HTS559, HTS518, HTS678 ve HTS728 modellerinin nominal güç, kapasite, adaptörler, filtreler, modlar, basınç kontrolleri ve yanma odası kapasitesini karşılaştırmaktadır.
What Should I Check Before Operation?
Before cleaning, inspect the machine and accessories, secure the recovery hose, make sure the adapter fits and seals correctly, inspect the filter, use the specified dry walnut abrasive, confirm the target intake valve is closed, connect dry filtered air, isolate other intake openings as required by the service procedure for the specific vehicle, and wear appropriate eye and respiratory protection.
How Can I Prevent Walnut Abrasive Residue From Remaining in the Engine?
Keep recovery active during cleaning, then vacuum out remaining walnut abrasive and inspect the cleaned area before reassembly. Before engine startup, confirm the intake valve position, check that the adapter seal was correct, and make sure no visible residue remains.
Garanti Süresi Ne Kadardır?
The main unit includes a 3-year warranty, standard accessories include a 1-year warranty, and lifetime maintenance support is available. See the Warranty Policy for regional coverage, eligibility, exclusions, and maintenance terms before purchase.
Yorumlar
İnceleme bırak
Ida Tours ✓ Onaylanmış Satın Alma -
mükemmel hizmet
thank you very much for the excellent service, product received as expected
Wisnik Michal ✓ Onaylanmış Satın Alma -
Professional walnut sand blasting equipment
Adjustable output air pressure. Deeply cleans carbon deposits in the intake manifold and valves. Equipped with an 1800W motor and an adjustable pressure knob, it has strong suction and flexible air pressure adjustment. In addition, it is equipped with 23 interfaces suitable for various models.
Rudolf Hubbard ✓ Onaylanmış Satın Alma -
The product design is sleek, the materials are top-notch, and the filter quality…
The product design is sleek, the materials are top-notch, and the filter quality is excellent. I know this filter can be cleaned and reused, which is fantastic. Another major plus is its outstanding cleaning performance! I’ve attached a comparison photo of an engine we cleaned at our repair shop. I highly recommend this product—every workshop should have one of these machines!