DİL VE PARA BİRİMİ
AUTOOL CT-Series Volumetric Glass Tube
US$10.00
Ana Özellikler
- Original Glass-Tube Replacement
- Model + Scale Matching
- Original Glass-Tube Replacement: Replace a damaged or unsuitable measuring tube on a supported AUTOOL CT-series cleaner and tester without replacing the main unit.
- Model + Scale Matching: Match the replacement by exact CT model, machine revision, visible scale marking, nameplate, and old-tube photos.
- 3-Yıl Garanti Ana ünite 3 yıl · Aksesuarlar 1 yıl
- 90 Günü İadesi 90 gün içinde iade edilebilir.
- Resmi Mağaza Orijinal ürünler · Doğrudan destek
AUTOOL CT Measuring Tube · Match by Bench and Scale
Restore the Correct Measuring Position
Restore readable collected-volume comparison on a supported AUTOOL CT-series injector bench with an original replacement glass measuring tube. Match the exact model, machine revision and scale markings to the existing tube so the replacement suits its position and measurement version. This separately sold service part replaces the tube without replacing the complete cleaner and tester.
- orijinal AUTOOL Cam tüp
- Restore Readable Volume Comparison
- Modele Özel Uyum
- Match the Scale Markings
Ana Özellikler
Graduated Glass Tube for a Compatible CT Bench
orijinal AUTOOL Servis Bölümü
Provides a replacement route for a damaged or unsuitable glass measuring tube on a supported AUTOOL makinesi.
Model-Specific Selection
Selection starts with the exact CT-series model and machine revision rather than the general product family.
Scale Confirmation
Support checks the visible scale marking so the selected tube matches the required measurement version.
Photo-Assisted Fitment
Nameplate and old-tube photos give the support team the visual information needed to identify the replacement.
Independent Accessory Identity
The listing covers a glass tube replacement and does not include the complete cleaner and tester machine.
3 Yıl Garanti Desteği
Ana ünite: 3 yıl garanti. Standart aksesuarlar: 1 yıl garanti. Garanti Politikası.
Nasıl Kullanılır?
Identify the Bench, Compare the Tube, Install, and Check
Adım ilerleme1 / 5
01
Record the Machine
Photograph the AUTOOL model nameplate and note the exact CT model and any version information.
02
Photograph the Old Tube
Capture the full tube, both ends and a clear close-up of the scale marking.
03
Seçimi Onaylayın
Send the model and photos to support, then confirm capacity/scale, fitment, quantity and order option before payment.
04
Inspect the Replacement
Compare the received tube with the confirmed order and old part before removing packaging or installing it.
05
Replace and Verify
Drain and isolate the machine according to its service instructions, install without forcing the glass, and check sealing and operation before measurement work.
Güvenlik ve Uyumluluk
Depressurize, Drain, and Protect the Glass During Service
Cam İşleme
Wear eye and hand protection, handle the tube gently and do not install chipped, cracked or damaged glass.
Drain and Isolate
Remove test fluid, isolate power and release any pressure before opening the machine or replacing the tube.
Exact Fit Required
Do not force a tube or seal that does not match the confirmed machine version.
Sızıntı Kontrolü
After installation, check seals and controlled return/drain operation before relying on readings.
Verify the Replacement Tube
Install the replacement tube, then follow the machine’s verification procedure before using its readings for measurement.
Tüp Seçimi
Match Tube Geometry, Scale, and Bench Model
Model Rehberi
Choose one or more options. Known Model and Scale is selected by default.
1 model seçildi
Hiçbir model seçili değil. Karşılaştırmak için bir model seçin.
| Göreviniz İçin Seçim Yapın | Known Model and Scale | Known Model, Unclear Scale | Unclear Machine Version |
|---|---|---|---|
| Identification & Order | |||
| Sağlanacak bilgiler | Model, scale and old-tube photo | Model plus clear old-tube photos | Nameplate, machine and old-tube photos |
| Order action | Sipariş vermeden önce onaylayın. | Ask support to identify the scale | Ask support to identify model and part |
| varsayma | Same model always uses one revision | Visual similarity proves scale | Any CT tube will fit |
Kullanım Kılavuzu ve İndirmeler
Use the Manual for Tube Fit and Replacement
CT Measuring Tube Manual & Guides
Visit the manual download center to find host-bench manuals plus measuring-tube compatibility, scale and position fit, installation, safety, and troubleshooting guidance before replacement.
paket
Neler Dahil?
- Selected Glass TubeThe confirmed replacement glass-tube option and quantity stated in the final order.
- Complete CT Machineİçermez.
- Other CT AccessoriesNot included unless explicitly listed in the final order.
SSS
Tube Fit and Replacement Questions
Is This A Complete Fuel Injector Cleaner And Tester?
No. This listing is for an AUTOOL replacement glass measuring tube only; it does not include a complete fuel injector cleaner and tester.
Which machine options can I select?
Ordering references include CT150, CT160, CT180, CT200 and CT400. Compatibility still depends on the exact machine version and tube scale.
Why Do I Need To Confirm The Glass Tube Scale Before Ordering?
Different machine models or versions may use different glass tube scales. Confirming the scale before ordering helps ensure the replacement glass tube matches your AUTOOL injector cleaner and tester.
- Different models or revisions may use different graduations or tube configurations, so the scale marking is part of fitment.
What should I send support?
Send the exact machine model, nameplate photo, old-tube photo and a readable close-up of the scale.
Are capacity and dimensions universal?
No. Confirm the capacity, graduation and fit for the selected replacement before ordering.
Does replacing the tube calibrate the machine?
No. Install the correct part, verify sealing and follow the machine’s measurement checks before relying on results.
How Do I Match The Machine Version And Tube Scale?
Match the tube to CT150, CT160, CT180, CT200, or CT400 only after confirming the exact machine version and scale marking with support.
What Information Should I Provide To Customer Service?
Please provide your machine model, a photo of the old glass tube, and a clear photo of the scale marking if available. This helps customer service confirm the correct replacement part before shipment.
Can I Place An Order If I Am Not Sure About The Model?
Please contact customer service before ordering if you are not sure which machine glass tube you need. This helps avoid choosing the wrong replacement glass tube.
Yorumlar
İnceleme bırak
Kenny Sitaram ✓ Onaylanmış Satın Alma -
Ürün güzel.
Product is good. Delivered in the time they said it would
Betate ✓ Onaylanmış Satın Alma -
İyi
Delivery was very fast and the service was exceptional
Israel Huels ✓ Onaylanmış Satın Alma -
gayet iyi çalışıyor
teşekkür ederim