AUTOOL ATL-4.5C Two-Post Car Lift
US$2,799.00
- 4,500 kg Two-Post Lift
- Dual-Cylinder Direct Drive
- Wire-Rope Synchronization
- Mechanical Arm + Column Locks
- 4,500 kg Two-Post Lift: Handle rated loads up to 4,500 kg in a single-side-control two-post layout.
- Dual-Cylinder Direct Drive: Raise the vehicle with a dual-cylinder direct-drive hydraulic system.
- Wire-Rope Synchronization: Keep both columns moving together through the wire-rope balancing system.
- Mechanical Arm + Column Locks: Use gear-type arm locks and hook-type mechanical protection to hold the lifting structure.
- 2,820 mm Height / 3,440 mm Width: Plan for 2,820 mm overall height and 3,440 mm overall width.
- 4,500 kg Two-Post Lift: Handle rated loads up to 4,500 kg in a single-side-control two-post layout.
- Dual-Cylinder Direct Drive: Raise the vehicle with a dual-cylinder direct-drive hydraulic system.
- Wire-Rope Synchronization: Keep both columns moving together through the wire-rope balancing system.
- Mechanical Arm + Column Locks: Use gear-type arm locks and hook-type mechanical protection to hold the lifting structure.
- 2,820 mm Height / 3,440 mm Width: Plan for 2,820 mm overall height and 3,440 mm overall width.
- 3-Year Warranty Main unit 3 years · Accessories 1 year
- 90-Day Returns Eligible returns within 90 days
- Official Store Genuine products · Direct support
AUTOOL ATL-4.5C · 4,500 kg Two-Post Car Lift
Control a 4.5-Ton Lift from One Side
Fit a two-post lift into lower-ceiling bays with the ATL-4.5C baseplate layout and 2,820 mm overall height. Single-side controls release both column locks, while dual-cylinder direct-drive hydraulics and wire-rope balancing synchronize lifting. Gear-type arm locks, hook-type mechanical protection and polymer sliders support routine workshop operation.
- Baseplate Two-Post Layout
- Single-Side Dual-Lock Release
- Dual-Cylinder Direct Drive
- Wire-Rope Synchronization
- Gear-Type Arm Locks
Key Features
Direct-Drive Hydraulics, Synchronized Columns, and Arm Locks
Dual-Cylinder Direct Drive
This hydraulic car lift uses a dual-cylinder direct-drive system to deliver stable power for smooth, seamless lifting during repair, maintenance, and inspection work.
Wire Rope Balancing
The wire rope balancing system keeps both columns synchronized and helps prevent vehicle tilt during lifting and lowering.
Laser-Cut Steel Structure
Columns and primary load-bearing components are fabricated from laser-cut steel plates for precise dimensions, smooth edges, and reliable structural stability.
Mechanical Safety Lock
A gear-type arm lock mechanism plus hook-type mechanical safety structure helps prevent slippage even when sliders experience wear over long-term use.
Low-Maintenance Wear-Resistant Sliders
Polymer wear-resistant sliders help reduce operational noise, minimize wear, and lower long-term maintenance costs.
Imported Seals And Durable Coating
Japanese / Italian imported critical seals help prevent oil leakage, while sandblasting and high-temperature electrostatic spraying improve coating adhesion, wear resistance, and corrosion resistance.
Synchronized Lifting
The wire rope balancing system improves left-right synchronization and reduces vehicle tilt risk during lifting.
Mechanical Locking Protection
Gear-type arm lock and hook-type mechanical safety structure provide physical protection during lifting and maintenance work.
Hydraulic Safety Protection
Multi-level mechanical and hydraulic safety protections are designed to comply with EU standards and safeguard both equipment and personnel.
The model combines mechanical arm restraints, column locks, hydraulic drive and wire-rope balancing. Confirm the declaration and documentation for the exact ordered configuration when a regional standard is required.
Stable Long-Term Operation
Imported seals, laser-cut steel plates, polymer sliders, and anti-corrosion coating work together to improve durability and reduce long-term maintenance needs.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
How to Use
Position, Raise, Lock and Lower the Vehicle
Qualify the Installation Site
Before vehicle lift installation, confirm the lift drawing, concrete strength and thickness, anchors, ceiling and door clearance, power, air where required, and vehicle approach space.
Inspect Before Use
Check anchors, columns or platforms, arms, pads, hoses, cables, cylinders, locks and synchronization components before loading a vehicle.
Position the Vehicle
Center the vehicle within the model geometry and keep doors, tires and bodywork clear of columns, platforms and moving parts.
Set Approved Pickup Points
Use the vehicle manufacturer’s approved pickup points and match arm, pad, platform and extension placement to the actual wheelbase and load distribution.
Raise and Check Stability
Lift only enough to take the load, stop and verify all contact points and vehicle balance, then continue while watching both sides.
Engage and Verify Locks
Lower onto the mechanical locks and confirm both sides are engaged before anyone enters the work area below the vehicle.
Clear and Lower
Remove tools and people, raise enough to release the locks as designed, lower through the controlled descent and check the lift after the vehicle exits.
Safety & Compatibility
Qualify the Bay Before the First Lift
Stay Within the Rated Configuration
Do not exceed the model’s rated load, and do not assume the capacity alone proves fit for a particular vehicle or load distribution.
Use the Required Foundation
Install and anchor the lift only to the specified concrete foundation and layout; obtain the model installation drawing before site work.
Use Approved Vehicle Pickup Points
Match arms, pads or platforms to the vehicle manufacturer’s lift points and keep the vehicle balanced.
Keep Clear of Moving and Pinch Zones
Keep people, tools, hoses and body parts away from arms, platforms, locks, cables and scissor mechanisms during movement.
Verify Locks Before Working Below
Confirm the mechanical locks are fully and evenly engaged before entering beneath the raised vehicle.
Inspect Hydraulic and Synchronizing Parts
Stop use if hoses, cylinders, cables, chains, seals, anchors or synchronization behavior show damage, leakage or abnormal movement.
Confirm Optional Equipment
Infrared, foot, arm or other optional protection is present only when it is included in the ordered configuration.
Confirm Site and Delivery Requirements
Confirm the 2820 mm overall height, 3440 mm overall width, workshop power, vehicle weight, destination freight, delivery appointment, unloading, and installation requirements with AUTOOL Store before ordering this large ocean-freight item.
Specifications
Capacity, Geometry and Utility Requirements
| Specification | Value |
|---|---|
| Rated Capacity | 4500kg |
| Lift Height Range | 95–1930mm |
| Lifting Time | 50s |
| Motor Power | 2.2kW |
| Overall Height | 2,820 mm |
| Overall Width | 3,440 mm |
| Power Supply | 380 V / 220 V optional; order-specific. |
Manual & Support
Confirm Installation and Ordered Configuration
AUTOOL ATL-4.5C Manual & Guides
Visit the manual download center to find ATL-4.5C guidance for vehicle positioning, synchronized lifting and arm locking, plus operating safety and troubleshooting support.
Package Contents
Verify the Supplied Lift Package
- Package ConfigurationConfirm the exact included items for the selected order configuration.
FAQs
Vehicle, Bay and Installation Questions
What Is The Rated Lifting Capacity Of ATL-4.5C?
The rated lifting capacity of AUTOOL ATL-4.5C is 4500 kg.
What Is The Maximum Lift Height?
The maximum lift height is 1930 mm. The minimum lifting height is 95 mm.
What Power Supply Does It Use?
The power supply is 380V / 220V optional. Confirm the required version before ordering so it matches your workshop electrical setup.
Does The Price Include Shipping?
No. The lift price excludes freight. The page lists a $4000 Large Item Ocean Freight charge as a checkout reference; actual freight is quoted separately for the destination. Request a current quote and confirm the delivery appointment, unloading equipment, site access, and installation scope before ordering.
What Safety Structures Does It Use?
ATL-4.5C uses a gear-type arm lock, hook-type mechanical safety structure, wire rope balancing system, and multi-level mechanical / hydraulic safety protections designed to comply with EU standards.
The lift uses the listed hydraulic drive, balance ropes, arm locks and mechanical protection structures. Request the declaration and documents for the exact model, voltage and ordered configuration if a specific regional standard is required.
What Should I Confirm Before Ordering?
Confirm the 2820 mm workshop height, 3440 mm bay width, power supply, vehicle weight range, floor and installation requirements, destination freight quote, unloading plan, and final order configuration before purchase.
No reviews yetBe the first to share your experience with this product.