AUTOOL ATL-4SH Hjuljusteringsløft med dobbel saks
US$5,199.00
- 4,000 kg Twin-Scissor Lift
- Synchronized Main + Auxiliary Lifts
- Separate Auxiliary Lift
- Dual Safety + Hydraulic Locks
- 4,000 kg Twin-Scissor Lift: Support wheel alignment and repair work on a 4,000 kg primary lift with 1,850 mm lifting height.
- Synchronized Main + Auxiliary Lifts: Use synchronized hydraulic control across the main and auxiliary lifting platforms.
- Separate Auxiliary Lift: Use the separately rated 4,000 kg auxiliary lift through 500 mm of travel; do not add it to the primary capacity.
- Dual Safety + Hydraulic Locks: Hold the platforms with two safety devices and hydraulic locks.
- 24 V Control Circuit: Operate through a 24 V low-voltage control circuit.
- 4,000 kg Twin-Scissor Lift: Support wheel alignment and repair work on a 4,000 kg primary lift with 1,850 mm lifting height.
- Synchronized Main + Auxiliary Lifts: Use synchronized hydraulic control across the main and auxiliary lifting platforms.
- Separate Auxiliary Lift: Use the separately rated 4,000 kg auxiliary lift through 500 mm of travel; do not add it to the primary capacity.
- Dual Safety + Hydraulic Locks: Hold the platforms with two safety devices and hydraulic locks.
- 24 V Control Circuit: Operate through a 24 V low-voltage control circuit.
- 3-Year Warranty Main unit 3 years · Accessories 1 year
- 90-Day Returns Eligible returns within 90 days
- Official Store Genuine products · Direct support
AUTOOL ATL-4SH · 4,000 kg Twin-Scissor Wheel Alignment Lift
Twin-Scissor Lift for Alignment Bays
Support four-wheel alignment, chassis service, and automotive repairs with the AUTOOL ATL-4SH twin scissor car lift. Its main and auxiliary lifting structure uses hydraulic synchronization to keep the platforms stable, with hydraulic locks, dual safety devices, and a 24V control circuit for controlled operation. Precision cylinders, premium seals and valves, and a laser-cut steel X-frame define the workshop lifting configuration.
- 4,000 kg Primary Lift
- 4,000 kg Auxiliary Lift (Non-Additive)
- 1,850 mm Primary Lift Height
- 500 mm Auxiliary Lift Height
- Alignment Platform Layout
Key Features
Main and Auxiliary Lifting Platforms
Italian Technology
Built with advanced Italian technology for precise, stable, and reliable lifting performance.
Primary + Auxiliary Hydraulic Sync
Hydraulic synchronization helps keep the main and auxiliary lifting platforms stable during operation.
Precision Cylinder Components
CNC-lathed cylinders with rolling burnishing treatment improve concentricity, surface finish, durability, and lifting precision.
Premium Seals And Valves
Japanese and Italian seals, Italian ball valves, and hydraulic burst protection improve reliability and operating safety.
Laser-Cut Steel Structure
Laser and CNC cutting help ensure precise dimensions, smooth edges, and a durable premium steel X-frame.
Durable Surface Treatment
Shot blasting and high-temperature spray coating improve strength, corrosion resistance, and long-term durability.
Dual Safety Devices
Dual safety devices improve operational safety during lifting and lowering.
Hydraulic Locks
Hydraulic locks provide secure holding and help reduce movement risk during operation.
Automatic Unlocking During Descent
Automatic unlocking during descent helps simplify operation while maintaining safety control.
24V Safety Control Circuit
The 24V safety control circuit supports safer low-voltage operation in workshop environments.
Oil Hose Burst Protection
The hydraulic burst protection system helps reduce risk if an oil hose or hydraulic circuit issue occurs.
Optional Infrared And Foot Protection
Optional infrared level detection and foot protection device provide additional safety for professional workshops.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
How to Use
Position, Raise, Lock and Lower the Vehicle
Qualify the Installation Site
Before vehicle lift installation, confirm the lift drawing, concrete strength and thickness, anchors, ceiling and door clearance, power, air where required, and vehicle approach space.
Inspect Before Use
Check anchors, columns or platforms, arms, pads, hoses, cables, cylinders, locks and synchronization components before loading a vehicle.
Position the Vehicle
Center the vehicle within the model geometry and keep doors, tires and bodywork clear of columns, platforms and moving parts.
Set Approved Pickup Points
Use the vehicle manufacturer’s approved pickup points and match arm, pad, platform and extension placement to the actual wheelbase and load distribution.
Raise and Check Stability
Lift only enough to take the load, stop and verify all contact points and vehicle balance, then continue while watching both sides.
Engage and Verify Locks
Lower onto the mechanical locks and confirm both sides are engaged before anyone enters the work area below the vehicle.
Clear and Lower
Remove tools and people, raise enough to release the locks as designed, lower through the controlled descent and check the lift after the vehicle exits.
Safety & Compatibility
Qualify the Bay Before the First Lift
Stay Within the Rated Configuration
Do not exceed the model’s rated load, and do not assume the capacity alone proves fit for a particular vehicle or load distribution.
Use the Required Foundation
Install and anchor the lift only to the specified concrete foundation and layout; obtain the model installation drawing before site work.
Use Approved Vehicle Pickup Points
Match arms, pads or platforms to the vehicle manufacturer’s lift points and keep the vehicle balanced.
Keep Clear of Moving and Pinch Zones
Keep people, tools, hoses and body parts away from arms, platforms, locks, cables and scissor mechanisms during movement.
Verify Locks Before Working Below
Confirm the mechanical locks are fully and evenly engaged before entering beneath the raised vehicle.
Inspect Hydraulic and Synchronizing Parts
Stop use if hoses, cylinders, cables, chains, seals, anchors or synchronization behavior show damage, leakage or abnormal movement.
Confirm Optional Equipment
Infrared, foot, arm or other optional protection is present only when it is included in the ordered configuration.
Spesifikasjoner
Capacity, Height, Power and Air
| Specification | Value |
|---|---|
| Primary Lift Capacity | 4000 kg |
| Primary Lift Height | 1850 mm |
| Motor Power | 3 kW |
| Air Supply | 0.4–0.6 MPa |
| Auxiliary Lift Capacity | 4,000 kg, separate and not additive to primary capacity |
| Auxiliary Lift Height | 500 mm |
| Power Configuration | 380 V / 220 V / Others, 3 kW |
| Retractable Secondary Platform | optional. |
Manual & Support
Confirm Installation and Ordered Configuration
AUTOOL ATL-4SH Manual & Guides
Visit the manual download center to find ATL-4SH guidance for alignment lifting, auxiliary platforms and hydraulic synchronization, plus lock safety and troubleshooting support.
Package Contents
Verify the Supplied Lift Package
- Package ConfigurationConfirm the exact included items for the selected order configuration.
- Main & Auxiliary UnitsDimensions: 455 × 63 × 76 cmWeight: 1813 kg
- PlatformDimensions: 123 × 54 × 47 cmWeight: 63 kg · Dimensions: 54 × 47 × 123 cmWeight: 86 kg
- Accessories BoxDimensions: 40 × 40 × 25 cmWeight: 15 kg
Vanlige spørsmål
Vehicle, Bay and Installation Questions
What Is The Lifting Capacity Of ATL-4SH?
The primary lifting capacity is 4000kg, and the auxiliary lifting capacity is also 4000kg.
What Is The Maximum Lifting Height?
The primary lifting height is 1850mm, and the auxiliary lifting height is 500mm.
What Power Supply Does ATL-4SH Require?
The specification image lists motor power options as 380V / 220V / others 3KW. Confirm the required power version before ordering.
What Air Source Pressure Is Required?
The listed air source pressure is 0.4-0.6MPa.
Is The Secondary Lifting Platform Included?
The retractable secondary lifting platform is described as optional. Confirm the final configuration before ordering.
Are Infrared Level Detection And Foot Protection Included?
Infrared level detection and the foot protection device are described as optional features. Confirm availability and configuration before ordering.
Is This Lift Suitable For Four-Wheel Alignment?
Yes. ATL-4SH is positioned as a four-wheel alignment twin scissor main and auxiliary lift.
What Should I Confirm Before Purchase?
Confirm workshop installation space, floor conditions, power supply, air source pressure, optional safety features, shipping dimensions, total package weight, and professional installation requirements before purchase.
No reviews yetBe the first to share your experience with this product.