AUTOOL ATL-4.5D/ATL-4.5DW To-søyles bilheis
Prisområde: US$2,839.00 til US$2,999.00
- 4,500 kg Layout Choice
- 95–1,990 mm Lift Range
- Direct Drive + Rope Balance
- One-Side Dual Unlock
- 4,500 kg Layout Choice: Choose the ATL-4.5D or wider-column ATL-4.5DW layout for rated loads up to 4,500 kg.
- 95–1,990 mm Lift Range: Reach vehicles from a 95 mm minimum height to a 1,990 mm maximum lifting height.
- Direct Drive + Rope Balance: Combine dual-cylinder hydraulic direct drive with wire-rope synchronization for both columns.
- One-Side Dual Unlock: Release both column safety locks together from one control side.
- Reinforced Low-Car Arms: Use reinforced second and third support arms for sports cars and ultra-low chassis designs.
- ATL-4.5D / 4.5DW Lift Dimensions: Both models are 3,900 mm high. ATL-4.5D: 2,860 mm inner / 3,440 mm overall width. ATL-4.5DW: 3,000 mm inner / 3,580 mm overall width.
- 4,500 kg Layout Choice: Choose the ATL-4.5D or wider-column ATL-4.5DW layout for rated loads up to 4,500 kg.
- 95–1,990 mm Lift Range: Reach vehicles from a 95 mm minimum height to a 1,990 mm maximum lifting height.
- Direct Drive + Rope Balance: Combine dual-cylinder hydraulic direct drive with wire-rope synchronization for both columns.
- One-Side Dual Unlock: Release both column safety locks together from one control side.
- Reinforced Low-Car Arms: Use reinforced second and third support arms for sports cars and ultra-low chassis designs.
- ATL-4.5D / 4.5DW Lift Dimensions: Both models are 3,900 mm high. ATL-4.5D: 2,860 mm inner / 3,440 mm overall width. ATL-4.5DW: 3,000 mm inner / 3,580 mm overall width.
- 3-Year Warranty Main unit 3 years · Accessories 1 year
- 90-Day Returns Eligible returns within 90 days
- Official Store Genuine products · Direct support
AUTOOL ATL-4.5D/4.5DW · 4,500 kg Gantry Two-Post Car Lifts
Choose Standard or Wide Column Clearance
Choose ATL-4.5D for the standard bay layout or ATL-4.5DW for wider column clearance, with 4,500 kg capacity, direct-drive hydraulics, synchronized lifting, and one-side safety release.
- 4,500 kg Rated Capacity
- 95–1,990 mm Lift Range
- Standard / Wide Bay Options
- Direct-Drive Dual Cylinders
- Single-Side Lock Release
Key Features
Balance Two Columns with Direct-Drive Hydraulics
Precision Manufacturing
Laser-cut steel plates and CNC-machined cylinders ensure accurate dimensions, excellent concentricity, and smooth surface finish.
Durable Hydraulic System
Rolling burnished cylinder barrels combined with high-quality Japanese seals provide long service life and reliable sealing performance.
Dual-Cylinder Synchronized Lift
Dual-cylinder direct-drive hydraulic system with wire rope balance mechanism helps both sides lift smoothly and synchronously.
Enhanced Wear Resistance
High-molecular wear-resistant sliders reduce friction and extend operational lifespan during repeated workshop lifting cycles.
Multi-Level Safety Design
Single-side control, dual-side safety unlocking, hook-type safety lock, gear-type arm locking, and multi-level protection improve operator safety.
Corrosion-Resistant Finish
Shot blasting and high-temperature spray coating deliver strong corrosion resistance and long-term surface durability.
4,500kg Two-Post Lifting
ATL-4.5D and ATL-4.5DW combine direct-drive hydraulics with wire-rope synchronization and a 95mm minimum height. Choose the installation width that fits your workshop.
Hook-Type Safety Lock
More stable hook-type safety lock helps prevent slippage caused by slider wear and improves mechanical holding safety.
Dual-Side Safety Unlocking
The unilateral unlocking mechanism synchronously unlocks both side columns from one control side, reducing workload and improving safety.
Gear-Type Arm Locking
Gear-type arm locking helps keep support arms stable during lifting and positioning.
Reinforced Supporting Arms
The reinforced construction of the second and third support arms makes the lift more suitable for sports cars and ultra-low-chassis designs.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
How to Use
Position, Raise, Lock and Lower the Vehicle
Qualify the Installation Site
Before vehicle lift installation, confirm the lift drawing, concrete strength and thickness, anchors, ceiling and door clearance, power, air where required, and vehicle approach space.
Inspect Before Use
Check anchors, columns or platforms, arms, pads, hoses, cables, cylinders, locks and synchronization components before loading a vehicle.
Position the Vehicle
Center the vehicle within the model geometry and keep doors, tires and bodywork clear of columns, platforms and moving parts.
Set Approved Pickup Points
Use the vehicle manufacturer’s approved pickup points and match arm, pad, platform and extension placement to the actual wheelbase and load distribution.
Raise and Check Stability
Lift only enough to take the load, stop and verify all contact points and vehicle balance, then continue while watching both sides.
Engage and Verify Locks
Lower onto the mechanical locks and confirm both sides are engaged before anyone enters the work area below the vehicle.
Clear and Lower
Remove tools and people, raise enough to release the locks as designed, lower through the controlled descent and check the lift after the vehicle exits.
Safety & Compatibility
Qualify the Bay Before the First Lift
Stay Within the Rated Configuration
Do not exceed the model’s rated load, and do not assume the capacity alone proves fit for a particular vehicle or load distribution.
Use the Required Foundation
Install and anchor the lift only to the specified concrete foundation and layout; obtain the model installation drawing before site work.
Use Approved Vehicle Pickup Points
Match arms, pads or platforms to the vehicle manufacturer’s lift points and keep the vehicle balanced.
Keep Clear of Moving and Pinch Zones
Keep people, tools, hoses and body parts away from arms, platforms, locks, cables and scissor mechanisms during movement.
Verify Locks Before Working Below
Confirm the mechanical locks are fully and evenly engaged before entering beneath the raised vehicle.
Inspect Hydraulic and Synchronizing Parts
Stop use if hoses, cylinders, cables, chains, seals, anchors or synchronization behavior show damage, leakage or abnormal movement.
Confirm Optional Equipment
Infrared, foot, arm or other optional protection is present only when it is included in the ordered configuration.
Spesifikasjoner
Capacity, Geometry and Utility Requirements
ATL-4.5D
ATL-4.5D — 2860 mm inner / 3440 mm overall
ATL-4.5DW
ATL-4.5DW — 3000 mm inner / 3580 mm overall
| Specification | Value |
|---|---|
| Lifting Capacity | 4500 kg |
| Maximum Lift Height | 1990 mm |
| Lifting Time | 50 sec |
| Motor Power | 2.2 kW |
| Minimum Height | 95 mm |
| Total Height | 3,900 mm |
| ATL-4.5D Inner / Overall Width | 2,860 / 3,440 mm |
| ATL-4.5DW Inner / Overall Width | 3,000 / 3,580 mm |
| Descent Time | 30 sec |
| Concrete Base | more than 500 mm thick and level |
| Power Configuration | 380 V / 220 V / other options, 2.2 kW. |
Manual & Support
Confirm Installation and Ordered Configuration
AUTOOL ATL-4.5D/4.5DW Manual & Guides
Visit the manual download center to find ATL-4.5D/4.5DW guidance for column layout, synchronized lifting and safety unlocking, plus operating safety and troubleshooting support.
Package Contents
Verify the Supplied Lift Package
- Main And Auxiliary Units383 × 44 × 72 cm, 671 kg
- Electrical Control Box83 × 28 × 31 cm, 20 kg
- Accessories Box40 × 40 × 25 cm, 15 kg
Vanlige spørsmål
Vehicle, Bay and Installation Questions
What Is The Difference Between ATL-4.5D And ATL-4.5DW?
ATL-4.5D and ATL-4.5DW share the same 4500kg lifting capacity, 95mm minimum height, 1990mm maximum lifting height, 50s lifting time, 30s descent time, 3900mm total height, and 2.2kW motor. The main difference is width: ATL-4.5D has 2860mm inner column width and 3440mm total width, while ATL-4.5DW has 3000mm inner column width and 3580mm total width.
What Vehicles Is This Lift Suitable For?
It is suitable for professional workshop use and a wide range of vehicles, including sports cars and low-chassis models. The second and third supporting arms are designed with higher strength and better low-chassis compatibility.
What Is The Required Workshop Height?
The total lift height is 3900mm, so workshop ceiling height and overhead clearance must be confirmed before ordering.
What Concrete Base Is Required?
The concrete base should be more than 500mm thick and level. Confirm floor strength and installation conditions before purchase and installation.
What Is The Lifting Capacity?
Both ATL-4.5D and ATL-4.5DW support 4500kg lifting capacity.
What Power Options Are Available?
The specification image lists 380V / 220V / other options with 2.2kW motor power. Confirm final voltage option with AUTOOL Store before ordering.
Does Electronic Unlocking Require Extra Budget?
For ATL-4D, ATL-4.5D, and ATL-4.5DW models that require electronic unlocking, additional budget may be required. Contact AUTOOL Store for consultation before ordering.
Is Professional Installation Required?
Professional installation is recommended because two-post lifts require correct anchoring, leveling, electrical connection, hydraulic setup, balance adjustment, and safety checks.
No reviews yetBe the first to share your experience with this product.