언어 및 통화
AUTOOL CT160 4-Cylinder Heated Injector Cleaner and Tester
원래 가격은 US$379.00입니다.US$245.00현재 가격: US$245.00.
주요 특징
- 4개 인젝터 12V 테스트
- 45°C Heated Ultrasonic Cleaning
- 3 Cleaning + 9 Test Modes
- Separate Fluid Drains
- 4개 인젝터 12V 테스트: Compare up to four compatible standard 12 V gasoline injectors for spray, collected volume and leakage under matched low-pressure conditions.
- 45°C Heated Ultrasonic Cleaning: A 2000 mL ultrasonic tank heats approved cleaning fluid to 45°C before matched retesting.
- 3 Cleaning + 9 Test Modes: Use three cleaning modes and nine test modes for idle, speed, acceleration, leakage, and spray-volume work.
- Separate Fluid Drains: Separate drain valves recover used cleaning and test fluids from their respective circuits.
- Function, Pressure + Run Controls: Display and adjust working parameters, functions, and pressure with Start, Pause, and Stop controls.
- 3 - 년 보증 본체 3년, 부속품 1년
- 90- 일 반품 90일 이내 반품 가능
- 공식 스토어 정품 · 직접 지원
AUTOOL CT160 · Heated Four-Position Low-Pressure Injector Bench
Add Heated Cleaning Before Four-Injector Comparison
Clean compatible standard 12 V gasoline injectors in a 2 L ultrasonic tank heated to 45°C where the fluid and injector permit, then compare up to four injectors for spray appearance, leakage and collected volume under matched low-pressure conditions. Three cleaning modes and nine test modes provide adjustable clean-test-recheck cycles, with separate drains for cleaning and testing fluids.
- 4위치 인젝터 비교
- 표준 12V 가솔린 인젝터
- 2 L / 45°C Ultrasonic Cleaning
- 3 Cleaning + 9 Test Modes
- Separate Fluid Drains
주요 특징
Four Positions with a 45°C Heated Bath
Heated Ultrasonic Injector Cleaning
Clean one or more compatible injectors in this fuel injector cleaning machine’s ultrasonic tank with the approved fluid and procedure to help loosen internal deposits before retesting.
45°C Heated Cleaning Fluid
The 2000 mL tank heats cleaning fluid to 45 °C. Use heating only where the manual and injector material allow it, and record it as part of the cleaning condition.
Four-Position Visual Testing
This gasoline injector tester lets you compare up to four compatible injectors side by side for spray appearance, collected volume, and leakage under matched low-pressure conditions.
12 Injector Cleaning and Testing Functions
Use 3 cleaning modes and 9 test modes covering idle, medium speed, high speed, acceleration, variable speed, leakage, and spray-volume work.
Injector Leak, Spray, and Flow Diagnosis
Use closed-state leakage, spray quality, collected-volume balance, and restriction clues to guide cleaning, retesting, specialist diagnosis, or replacement.
Drain Valve Fluid Handling
Separate drain valves support recovery of used cleaning and testing fluids after the appropriate procedure, helping routine fluid handling and maintenance.
영어 제어판
The panel displays and adjusts working parameters, selects functions, controls pressure, and provides Start, Pause, and Stop operation.
Spark-Plug Cleaning
The ultrasonic tank can clean compatible spark plugs when the manual, liquid, temperature, loading, and material guidance allow it.
Motorcycle and Optional On-Car Service
Motorcycle injectors need the correct adapters, and cleaning injectors without removal needs optional accessories; confirm each application and procedure before use.
3년 보증 지원
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
이용 방법
Identify, Heat, Clean, Mount, Test, and Compare
단계별 진행 상황1 / 6
01
Identify, Inspect, and Record a Baseline
Confirm the injector part number, 12 V scope, adapters, seals, and allowed cleaning method. Label the four positions and record pressure, pulse setting, mode, test time, test fluid, and initial results.
02
인젝터 외부를 청소하세요
Remove loose exterior dirt with an approved cleaner before loading the ultrasonic tank.
03
Add Fluid and Run Heated Ultrasonic Cleaning
Add the manual-approved cleaning fluid, keep it below the electrical pulse connector, connect the pulse lead, and use heating up to 45 °C only when the product procedure and injector materials allow it. Never dry-run the tank.
04
Install Injectors for Testing
Secure the compatible injectors, seal unused positions, check resistance, shorts, and current draw when required, and add approved non-corrosive test fluid to the testing circuit.
05
Run Leakage, Spray, and Flow Tests
Use the selected modes to observe closed-state leakage, spray appearance, collected-volume balance, and behavior under simulated low-pressure operating conditions.
06
Repeat, Decide, and Drain
Repeat the same settings after cleaning, record improvement or no improvement, then recover the cleaning and test fluids through their respective drains and follow the correct next diagnostic path.
안전성 및 호환성
Match Injector, Temperature, Drive, Fluid, and Adapter
표준 12V 가솔린 테스트 스코프
Testing is for compatible standard 12 V gasoline injectors. Confirm part number, impedance/current requirements, connector, seals, and adapters rather than relying on a vehicle or brand label.
Choose the Correct Injector Test Method
CT160 tests compatible standard gasoline injectors. Diesel injectors may be ultrasonically cleaned with the approved liquid, temperature, immersion method, and depth; GDI and diesel testing require dedicated equipment.
Separate the Two Fluid Circuits
Use approved cleaning fluid in the ultrasonic tank and approved non-corrosive test fluid in the test circuit. Do not mix them or test with corrosive cleaning liquid.
Control Heat and Liquid Level
Do not run ultrasonic cleaning or heating without the correct liquid. Keep the liquid below electrical pulse connectors and confirm that 45 °C is allowed for the specific injector or spark plug.
사용하지 않는 위치에 플러그를 꽂으세요
For a single injector, seal the other three positions with approved plugs and check the rail and adapters for leaks before pressurizing.
Confirm Optional Applications
Motorcycle injector work and cleaning without removal require the correct optional adapters and a separate approved procedure. Spark-plug cleaning should be verified against the current manual and material compatibility.
Confirm Regional Power
Select the correct 110 V or 220 V input and plug version before ordering. Stop after a fuse event or any leak, damaged cable, abnormal heat, or pressure instability.
Manage Liquids and Waste
Keep liquids away from ignition sources, provide suitable ventilation, monitor operation, and follow the product instructions, liquid SDS, and local disposal rules.
시험 결과
분무량, 누출량 및 용량을 나란히 비교해 보세요.
닫혀있는 동안 물방울이 떨어집니다
Possible causes include contamination, valve-seat wear, or a sealing fault. Verify the fixture and pressure, clean and retest, then refer or replace if leakage remains.
한 튜브에 훨씬 적은 양이 들어 있습니다.
Restriction, a fixture leak, a channel issue, or an injector fault may be responsible. Check seals and pressure, swap channels where allowed, and repeat before concluding.
튕겨 나가거나, 갈라지거나, 거칠거나, 물방울이 떨어지는 분무
Deposits or nozzle/internal damage may be involved. Repeat after cleaning under matched conditions and use specialist service if unchanged.
Differences Shrink After Heated Cleaning
A recoverable restriction may have been reduced, but heating alone proves nothing. Record the conditions, renew applicable seals, and verify on the vehicle.
뚜렷한 개선 없음
The injector may already be clean or may have electrical or mechanical damage. Stop repeated cleaning and continue diagnosis, specialist testing, or replacement.
Next Checks if the Symptom Remains
If the low-pressure comparison is balanced but the symptom remains, continue with ignition, compression, intake-leak, fuel-supply, wiring, and control-signal checks.
동일한 조건에서 결과를 비교하세요
Compare injectors under the same recorded CT160 conditions. Use injector-specific limits or dedicated equipment when OEM calibration or high-pressure GDI data is required.
모델 비교
Compare Heating and Test Capacity
모델 가이드
하나 이상의 모델을 선택하세요. CT160이 기본값으로 선택되어 있습니다.
1개 모델이 선택되었습니다.
선택된 모델이 없습니다. 비교할 모델을 선택하세요.
| 제품명 | CT150 | CT160 | CT200 | CT400 | CT450 | CT500 | FN602 | FN603 | FN606 | FN608 |
|---|---|---|---|---|---|---|---|---|---|---|
| 설정 및 제어 | ||||||||||
| 입력 전압 | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V | 110 / 220V |
| 펄스 설정 | 0-20ms | 0-20ms | 0-20ms | 0-20ms | 0-20ms | 0-40ms, 단계 크기 0.1ms | 0-20ms | 0-20ms | 0-40ms, 단계 크기 0.1ms | 0-40ms, 단계 크기 0.1ms |
| 시간 설정 범위 | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min | 0 - 10min |
| 시뮬레이션된 RPM 범위 | X | X | X | X | X | X | X | X | X | X |
| 지원되는 전압 설정 | 12V 고정 구동 방식이며, 12V/70V/120V 모드 선택이 불가능합니다. | 12V 고정 구동 방식이며, 12V/70V/120V 모드 선택이 불가능합니다. | 12V 고정 구동 방식이며, 12V/70V/120V 모드 선택이 불가능합니다. | 12V 70V 120V | 12V 70V 120V | 12V 70V 120V | 12V 70V 120V | 12V 70V 120V | 12V 12V-70V 120V-180V | 12V 12V-70V 120V-180V |
| 언어 설정 | × | × | × | × | × | 2가지 종류 (중국어, 영어) | × | × | 2가지 종류 (중국어, 영어) | 2가지 종류 (중국어, 영어) |
| 압력 게이지 표시 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| LCD 디스플레이 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 세척 및 유체 시스템 | ||||||||||
| 시험관 부피 | 110ml | 100ml | 110ml | 110ml | 110ml | 110ml | 100ml | 110ml | 110ml | 110ml |
| 청소 탱크 용량 | 1000ml | 2000ml | 1700ml | 2000ml | 2000ml | 주문하신 상품의 탱크 용량을 확인해 주세요. | 2000ml | 2000ml | 550ml | 550ml |
| 초음파 세척력 | 70w | 70w | 70w | 70w | 70w | 70w | 70w | 70w | 70w | 70w |
| 내장 펌프 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 |
| 세척액 가열 | × | ✓ (45℃) | × | × | ✓ (50℃) | × | ✓ (45℃) | ✓ (45℃) | ✓ (50℃) | ✓ (50℃) |
| 액체 레벨 게이지 테스트 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 세척액 회수 밸브 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 탈착식 청소 탱크 | × | × | × | × | × | × | ✓ | × | ✓ | ✓ |
| 주유 펌프 수 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 2 |
| 기능 및 인젝터 적용 범위 | ||||||||||
| 기본 기능 | 3가지 청소 기능 9가지 테스트 기능 | 3가지 청소 기능 9가지 테스트 기능 | 3가지 청소 기능 9가지 테스트 기능 | 3가지 청소 기능 9가지 테스트 기능 | 3가지 청소 기능 10가지 테스트 기능 | 3가지 청소 기능 12가지 테스트 기능 | 3가지 청소 기능 10가지 테스트 기능 | 3가지 청소 기능 10가지 테스트 기능 | 3가지 청소 기능 12가지 테스트 기능 | 3가지 청소 기능 12가지 테스트 기능 |
| 어댑터 커넥터 | 3 유형 | 5 유형 | 3 유형 | 9 유형 | 9 유형 | 9 유형 | 9 유형 | 9 유형 | 9 유형 | 9 유형 |
| 인젝터 테스트 위치 | 4 연료 분사 장치 | 4 연료 분사 장치 | 6 연료 분사 장치 | 6 연료 분사 장치 | 6 연료 분사 장치 | 6 연료 분사 장치 | 4 연료 분사 장치 | 6 연료 분사 장치 | 6 연료 분사 장치 | 8 연료 분사 장치 |
| 연료 분사기 청소 유형 | 표준 연료 분사기 | 표준 연료 분사기 | 표준 연료 분사기 | 표준 연료 분사기 GDI, EFI, FSI 롱 연료 인젝터 | 표준 연료 분사기 GDI, EFI, FSI 롱 연료 인젝터 | 표준 연료 분사기 GDI, EFI, FSI 롱 연료 인젝터 | 표준 연료 분사기 GDI, EFI, FSI 롱 연료 인젝터 | 표준 연료 분사기 GDI, EFI, FSI 롱 연료 인젝터 | 표준 연료 분사기 GDI, EFI, FSI 롱 연료 인젝터 | 표준 연료 분사기 GDI, EFI, FSI 롱 연료 인젝터 |
| 저임피던스 인젝터 지원 | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. | 호환되는 제품만 사용하십시오. 인젝터 부품 번호와 구동 요구 사항을 확인하십시오. |
| 운영 및 장비 | ||||||||||
| 오일 배플 디자인 | × | × | × | × | × | ✓ | ✓ | ✓ | ✓ | ✓ |
| 작동 조건 시뮬레이션 테스트 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| 스토리지 서랍 | × | × | × | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
사용 설명서 및 다운로드
설정 및 테스트 모드에 대해서는 설명서를 참조하십시오.
AUTOOL CT160 사용자 설명서
Open the PDF manual for CT160 heated ultrasonic cleaning, four-injector spray, leakage and volume tests, fluid draining, operating safety, and troubleshooting.
묶음
포함 된 것
- 본체AUTOOL CT160 fuel injector testing machine with heated ultrasonic cleaning.
- 소매용 박스 및 설명서CT160 제품 상자 및 사용 설명서.
- Fluid-Handling PartsFunnel, drain-valve parts, and related accessories.
- Injector Adapters and PlugsAdapter plates, connector sets, injector adapters, and unused-position plugs. Confirm exact types and quantities for the selected option.
- Test and Pulse CablesInjector test cables and pulse-signal cable set.
- Pressure and Fuel-Rail AssemblyPressure gauge and fuel-rail assembly.
- 유체 및 선택 사양 키트Cleaning/test fluids and optional motorcycle or cleaning-without-removal kits are included only when the selected option says so.
자주 묻는 질문
Heating, Injector Fit, and Test Questions
CT150, CT160, CT200의 차이점은 무엇인가요?
CT150 and CT160 are both designed for cleaning and testing fuel injectors of 4-cylinder gasoline engines. The main difference is that CT160 adds an ultrasonic heating function, while CT150 does not have this feature. Compared with CT150, CT200 adds two additional test positions for up to six injectors at once, while the other basic functions remain similar.
- Both are four-position standard 12 V gasoline injector benches, but CT160 adds a 2000 mL tank that heats cleaning fluid to 45 °C. CT150 does not heat the cleaning fluid.
How is CT160 different from CT200?
CT160 prioritizes four-position heated cleaning; CT200 provides six positions without heating. Choose by injector type, batch size, heating need, adapters, and workflow.
CT160으로 디젤 인젝터를 세척하고 테스트할 수 있나요?
CT160 tests compatible gasoline injectors and can ultrasonically clean diesel injectors under an approved procedure. Diesel injector testing requires dedicated equipment.
- Testing supports compatible standard 12 V gasoline injectors. Diesel injectors may be ultrasonically cleaned under an approved procedure; high-pressure GDI and diesel performance testing require dedicated equipment.
Does 45 °C heating prove better cleaning?
No. Heating is a controlled process option. The useful evidence is a matched before-and-after test, and some materials or deposits may require a different method.
Can CT160 test one injector?
Yes, if compatible, while the other three positions are sealed with approved plugs and the setup passes a leak check.
어떤 세척액을 사용해야 할까요?
For ultrasonic cleaning, use professional engine carbon cleaning fluid or professional injector ultrasonic cleaning fluid. 75%+ medical alcohol can be used as an alternative if professional cleaning fluid is not available, but the cleaning effect may not be as strong.
- Use manual-approved ultrasonic cleaning fluid in the tank and approved non-corrosive injector test fluid in the testing circuit. Do not mix the circuits or use cleaning liquid as test fluid.
Can it clean spark plugs?
The ultrasonic tank can clean compatible spark plugs. Confirm the manual procedure, allowable liquid, temperature, and material compatibility before use.
Can it service motorcycle injectors or clean without removal?
Only with the correct compatible optional adapters and procedure. Confirm the injector part number and exact kit before ordering.
How should I interpret a low measuring tube?
First check rail pressure, seals, installation, and channel behavior. Repeat under the same conditions before deciding the injector itself is restricted.
무엇이 포함되어 있습니까?
The package includes the main unit, box, manual, fluid-handling parts, adapters/plugs, test cables, pulse cable, and pressure/fuel-rail assembly. Confirm quantities and option-specific items before purchase.
어떤 보증이 포함되나요?
본체: 3년 보증. 표준 부속품: 1년 보증. 보증 정책.
What Injectors Can CT160 Clean And Test?
CT160 is designed for cleaning and testing standard 12V gasoline fuel injectors. It supports up to 4 compatible injectors at the same time and can be used for cars and compatible motorcycles when the proper adapters and accessories are used.
Can CT160 Test GDI High-Pressure Injectors?
No. CT160 is not recommended for GDI high-pressure injector testing. If you need GDI, EFI, FSI, or broader high-pressure injector compatibility, choose CT400, CT450, CT500, FN606, or FN608 according to the required injector type and testing capacity.
Can I Use Cleaning Fluid To Test Injectors?
No. Do not use cleaning fluid to test injectors. Cleaning fluid may corrode internal components and rubber seals, cause leaks, and result in repair costs not treated as a normal machine failure.
How Do I Test A Single Injector With CT160?
When testing a single injector, plug the other 3 unused test positions. CT160 includes 3 plugs for this setup so the unused cylinders can be blocked during testing.
How Do I Set The Test Parameters?
For basic testing, you do not need complex parameter setup. Select the function number and set the test time according to the test you need. The control panel provides function selection, working parameter display and adjustment, pressure adjustment, and Start / Pause / Stop operation.
CT400, CT450, CT500의 차이점은 무엇인가요?
CT450 adds a Pulse Injection Test compared with CT400. CT500 further adds Wide Pulse Injection Test and Continuous Injection Test compared with CT450. For cleaning and heating, CT450 features ultrasonic cleaning with heating up to 50°C, while CT400 and CT500 do not have the same heating function in this comparison.
What Is The Difference Between FN608 And FN606?
FN608 supports testing for 8 cylinders, while FN606 supports testing for 6 cylinders. FN608 also uses two independent fuel pumps, each corresponding to a separate left or right fuel rail. If one pump fails, only the corresponding rail is affected, while the other can continue working. FN606 uses a single fuel pump, so a pump failure stops the whole system until the pump is replaced.
What Is The Difference Between FN608 And CT500?
- Positions: FN608 tests 8 injectors; CT500 tests 6.
- Heating/tank: FN608 heats to 50°C and its tank works separately or with the main unit; CT500 has an integrated tank with no stated heating.
- Drive: FN608 supports 12 V / 12–70 V / 120–180 V; CT500 supports 12 V / 70 V / 120 V.
- Pumps: FN608 uses two independent pumps; CT500 uses one.
고객 리뷰
리뷰 남기기
Dylan Judith ✓ 구매 확인 완료 -
The set arrived complete.
The set arrived complete. We plugged it in at the delivery point, and it works. I haven’t used it yet, but I’ll add to my review later.
레이몬드 ✓ 구매 확인 완료 -
This device perfectly meets my needs.
This device perfectly meets my needs. It can test four injectors at a time and has multiple modes to choose from. Based on the test results, I can find out which injectors need to be replaced. I recommend it to personal repair users.
Bruno Locke ✓ 구매 확인 완료 -
This fuel injector tester (Autool 160) is a blast to use.
This fuel injector tester (Autool 160) is a blast to use. I was able to find the one injector on my 5.7 hemi hanging open and fouling the plugs. Very useful for testing and cleaning. Arrived very well packaged and in perfect condition. Good price as well. Think before you act and develop a routine and you will be fine. I really enjoy using this tester. Thanks very much.