ภาษาและสกุลเงิน
AUTOOL TWB203 / TWB205 Wheel Balancer Series
ช่วงราคา: US$1,950.00 ถึง US$2,150.00
Key Features
- TWB203 Modes + Self-Check
- TWB205 2D Input Guidance
- TWB205 Laser + Foot Brake
- TWB205 OPT Optimization
- TWB203 Modes + Self-Check: Choose TWB203 for multiple balancing modes, board self-checks, and a serviceable ARM-based control layout.
- TWB205 2D Input Guidance: Use the configured measuring arm for automatic distance and diameter input; enter width manually unless the width sensor is fitted.
- TWB205 Laser + Foot Brake: On TWB205, guide weight placement with top and bottom lasers and lock imbalance points with the foot brake.
- TWB205 OPT Optimization: Use TWB205 OPT guidance to phase the tire and rim and reduce the wheel weight required for mass imbalance.
- TWB205 SPO Hidden Weights: Use TWB205 SPO to split and position correction weights behind wheel spokes.
- 3- รับประกันปี ตัวเครื่องหลัก 3 ปี · อุปกรณ์เสริม 1 ปี
- 90-Day Returns สินค้าที่ส่งคืนต้องอยู่ในสภาพสมบูรณ์ภายใน 90 วัน
- ร้านค้าอย่างเป็นทางการ สินค้าแท้ · การสนับสนุนโดยตรง
AUTOOL TWB203/205 · Digital Wheel Balancer Series
Choose Manual or Automated Wheel Setup
Choose TWB203 for multiple static, dynamic, and ALU balancing modes with board self-check, or TWB205 for configured 2D distance/diameter input, laser-guided weight placement, foot-brake positioning, OPT tire/rim phase guidance, and SPO hidden weights. Match the delivered centering hardware, measurement sensors, laser configuration, and regional power to the wheels and workflow the shop needs to service.
- Static / Dynamic / ALU Modes
- TWB203 Board Self-Check
- TWB205 Configured 2D Input
- OPT Phase Guidance
- SPO Hidden Weights
Key Features
Balance Wheels with Model-Specific Input Control
New ARM Microprocessor
The ARM-based control board runs the machine interface and self-check functions in a serviceable electronic layout.
Use the board self-check as an initial machine check alongside centering, dimension input, calibration, and mechanical inspection.
Clear Digital Control System
The microcomputer system combines a digital tube display and keyboard, providing clear visibility, simple operation, and improved functional control.
40mm Thickened Main Shaft
The thickened and extended main shaft uses a 40 mm lead screw. Confirm actual wheel width, shaft length and the space required by the selected cone or flange, pressure cup and quick nut before qualifying a wheel.
โหมดปรับสมดุลหลายแบบ
TWB203 supports multiple static, dynamic, and ALU balancing modes. TWB205 further supports intelligent workflow functions for parameter input and weight placement.
Wheel Weight Operation Platform
The operation platform makes it easy to cut and apply lead blocks, and includes a storage slot for a 100g calibration wheel weight.
Tire Protection Cover
The machine is equipped with a luxury tire protection cover. An external sonar measuring ruler is optional and should be confirmed before ordering.
TWB203 Enhanced Balancing
TWB203 combines multiple balancing modes with a self-check control board and a heat-treated, high-strength main shaft for daily wheel balancing service.
TWB205 Precision Workflow
TWB205 combines OPT phase guidance with SPO hidden-weight placement, configured parameter measurement, laser indicators, and foot-brake positioning; confirm the delivered sensors and laser configuration.
OPT Tire/Rim Optimization
Use OPT phase guidance to reposition the tire and rim relationship and reduce the correction weight required for mass imbalance.
OPT is a tire/rim phase-optimization function; it is not a loaded road-force or radial-force-variation measurement.
SPO Hidden Wheel Weight Placement
The SPO function decomposes and hides imbalance amounts behind wheel spokes, helping keep the wheel more aesthetically clean after balancing.
2D Automatic Measurement
TWB205 can measure distance and diameter through its configured measuring arm. Automatic width input requires the corresponding width sensor or optional measuring configuration; otherwise enter and verify width manually.
Top And Bottom Laser Indicators
Top and bottom laser indicators help guide lead weight placement more easily and accurately.
Cast-Iron Foot Brake
The cast-iron foot brake system helps lock imbalance points for easier and more stable operation.
Optimized Professional Workflow
TWB205 combines OPT, SPO, 2D measurement, laser guidance, and foot-brake positioning for workshops that need a faster, more guided balancing workflow and precise weight placement.
10–24-Inch Rim Range
Current TWB203 and TWB205 pages and manuals list 10–24-inch rim diameter, a separate 3–16-inch width field, maximum 1100 mm tire outside diameter and 70 kg maximum wheel weight.
น้ำหนักล้อสูงสุด
Maximum wheel weight: 65kg.
Supported Rim Diameter
Supported rim diameter: 10-26 inches.
สมดุลความเร็ว
Balancing speed: approximately 260 rpm.
รับประกัน 3 ปี
ตัวเครื่องหลัก: รับประกัน 3 ปี อุปกรณ์เสริมมาตรฐาน: รับประกัน 1 ปีนโยบายการรับประกัน
วิธีใช้
Enter Wheel Data, Spin and Verify Balance
ความคืบหน้าทีละขั้นตอน1 / 7
01
Inspect the Wheel Assembly
Check tire and rim condition, remove debris and old correction weights as required, and confirm wheel mass and dimensions are within the machine limits.
02
Clean and Center the Mounting
Clean the shaft and mating surfaces, select the correct cone or flange adapter and tighten the wheel squarely against the mounting face.
03
Enter or Measure Dimensions
Set distance, diameter and width for the actual wheel, using TWB205 automatic measurement where equipped and checking the displayed values.
04
Select the Balancing Mode
Choose the mode that matches the wheel and planned clip-on, adhesive or hidden-spoke weight placement.
05
Close the Guard and Spin
Keep clear of the rotating assembly, close the protection cover and run the measurement cycle.
06
Place the Indicated Weight
Rotate to the indicated position, clean the application surface and install the specified weight; use TWB205 laser guidance where equipped.
07
Run a Verification Spin
Spin again after installing weights and investigate centering, dimension entry, calibration or wheel condition if residual imbalance remains.
ความปลอดภัยและความเข้ากันได้
Center the Wheel and Control Every Spin
Use the Protection Cover
Close the guard before every spin and keep people, tools and loose items away from the rotating wheel.
Secure the Wheel on a Clean Shaft
Use the correct cone or flange adapter and verify the clamp before rotation.
Stay Within Machine Limits
Confirm wheel weight, diameter, width and mounting interface before loading the shaft.
Do Not Balance a Damaged Assembly
Inspect for structural rim damage, loose parts, severe tire damage or contamination that requires repair or replacement before balancing.
Calibrate and Recheck
Use the machine calibration procedure when required and confirm the correction with a second spin.
Recheck Residual Imbalance
If residual imbalance remains, recheck wheel mounting, dimensions, calibration, and tire or rim condition, then run another verification spin.
ผลสอบ
Confirm Residual Imbalance After Correction
ตรวจสอบผลลัพธ์
Run a check spin after fitting weights and investigate mounting or wheel condition if residual imbalance remains.
ข้อบ่งชี้จำเพาะ
Wheel, Rim and Power Specifications
TWB203
TWB203 — Balancing modes / Board self-check / Heat-treated shaft
TWB205
TWB205 — 2D measurement / Laser guidance / Foot brake
| Specification | ความคุ้มค่า |
|---|---|
| น้ำหนักล้อสูงสุด | 70 |
| เส้นผ่าศูนย์กลางขอบ | 10–24 นิ้ว |
| ช่วงความกว้าง | 3–16 นิ้ว |
| Maximum Tire Outside Diameter | 1100 มม |
| ความแม่นยำในการปรับสมดุล | 1 g; test and remount-repeatability conditions not published |
| Balancing Time | 7 s balancing cycle; mounting, wheel-data input, weight placement, and verification are separate steps |
| ความเร็วในการหมุน | 90 / 130 rpm; version or control mapping not defined |
| TWB203 Power Supply | 110–230 V page / 110 or 230 V manual, 50/60 Hz — confirm delivered version |
| TWB205 Power Supply | 110/240 V page / 100–230 V manual, 50/60 Hz — confirm delivered version |
คู่มือและฝ่ายสนับสนุน
Confirm Wheel Setup and Model Configuration
AUTOOL TWB203/205 Manual & Guides
Visit the manual download center to find TWB203/205 guidance for wheel measurement, balancing modes, weight placement and calibration, plus operating safety and troubleshooting support.
บรรจุภัณฑ์
Check Wheel Balancer Cones, Guards and Included Parts
- Selected Main UnitAUTOOL TWB203 or TWB205 wheel balancer in the confirmed regional power configuration
- Wheel Protection CoverWheel protection cover for the selected machine
- Weight Work PlatformIntegrated weight-cutting and storage platform; confirm whether the 100 g calibration reference is included
- อุปกรณ์ติดตั้งล้อConfirm the supplied shaft, quick nut, cones, pressure cup, protection ring and any required flange adapters for the target wheels
- Model-Specific Guidance HardwareFor TWB205, itemize measuring arms or width sensor, laser indicators and foot brake; confirm any sonar, radar or motorcycle accessories separately
- เอกสารObtain the manual, calibration procedure, packing list and nameplate details for the delivered serial configuration
คำถามที่พบบ่อย
Wheel Setup and Balance Questions
What Is The Difference Between TWB203 And TWB205?
TWB203 provides multiple balancing modes, OPT, and a control-board self-check. TWB205 combines OPT and SPO with configured 2D measurement inputs, laser-guided placement, and foot-brake positioning. Confirm the delivered sensors, lasers, power, and mounting accessories for the selected model.
Which Model Should I Choose For A Regular Workshop?
Choose TWB203 if your workshop needs a practical enhanced wheel balancer with easier maintenance and lower maintenance cost. Choose TWB205 if your workshop needs intelligent precision functions such as automatic parameter measurement, laser-guided placement, OPT optimization, SPO hidden weights, and foot brake locking.
Choose by target wheel range, centering hardware, balancing modes, parameter-input method and support needs. TWB205 is the guided-workflow option when its sensors, lasers and foot brake are included; TWB203 covers the listed manual-input balancing workflow.
Does TWB203 Support Multiple Balancing Modes?
Yes. TWB203 supports multiple balancing modes and is designed as an enhanced dynamic wheel balancer for professional balancing service.
What Do OPT And SPO Do On TWB205?
OPT helps optimize tire and rim combinations to reduce the amount of wheel weights required. SPO decomposes and hides imbalance amounts behind wheel spokes, helping improve the final wheel appearance after balancing.
OPT provides tire/rim phase-optimization guidance for mass imbalance, and SPO places correction weights behind spokes. OPT is not loaded road-force or radial-force-variation measurement and does not guarantee a fixed reduction in weight.
Does TWB205 Automatically Measure Wheel Parameters?
Yes. TWB205 uses a 2D system to automatically measure and input distance, diameter, and tire width parameters, reducing manual input work and improving balancing workflow efficiency.
TWB205 can automatically acquire distance and diameter with the configured measuring arm. Automatic width input depends on the supplied width sensor or measuring option; otherwise enter and verify width manually.
Does The Machine Support Extra-Wide Rims?
The thickened and extended main shaft uses a 40mm lead screw and supports balancing work for extra-wide rims. Confirm your target wheel size and workshop use case before ordering.
The machine lists a thickened, extended main shaft with a 40 mm lead screw, but that dimension alone does not qualify every extra-wide wheel. Confirm actual wheel width, shaft length and the space required by the selected cone or flange, pressure cup and quick nut.
Is An External Sonar Measuring Ruler Included?
The tire protection cover is included, and the external sonar measuring ruler is optional. Confirm the final configuration before ordering.
How Can I Confirm Price And Configuration?
ติดต่อเรา AUTOOL Store before ordering to confirm TWB203 / TWB205 model selection, optional sonar measuring ruler, machine size, machine weight, packaging dimensions, configuration, delivery requirements, and quotation.
ความคิดเห็นของลูกค้า
เขียนรีวิว
ยังไม่มีรีวิวร่วมแบ่งปันประสบการณ์ของคุณกับผลิตภัณฑ์นี้ก่อนใคร