ภาษาและสกุลเงิน
AUTOOL หลอดแก้ววัดปริมาตร CT-Series
US$10.00
Key Features
- Original Glass-Tube Replacement
- Model + Scale Matching
- Original Glass-Tube Replacement: Replace a damaged or unsuitable measuring tube on a supported AUTOOL CT-series cleaner and tester without replacing the main unit.
- Model + Scale Matching: Match the replacement by exact CT model, machine revision, visible scale marking, nameplate, and old-tube photos.
- 3- รับประกันปี ตัวเครื่องหลัก 3 ปี · อุปกรณ์เสริม 1 ปี
- 90-Day Returns สินค้าที่ส่งคืนต้องอยู่ในสภาพสมบูรณ์ภายใน 90 วัน
- ร้านค้าอย่างเป็นทางการ สินค้าแท้ · การสนับสนุนโดยตรง
AUTOOL CT Measuring Tube · Match by Bench and Scale
Restore the Correct Measuring Position
Restore readable collected-volume comparison on a supported AUTOOL CT-series injector bench with an original replacement glass measuring tube. Match the exact model, machine revision and scale markings to the existing tube so the replacement suits its position and measurement version. This separately sold service part replaces the tube without replacing the complete cleaner and tester.
- Original AUTOOL หลอดแก้ว
- Restore Readable Volume Comparison
- ความพอดีเฉพาะรุ่น
- Match the Scale Markings
Key Features
Graduated Glass Tube for a Compatible CT Bench
Original AUTOOL ส่วนบริการ
Provides a replacement route for a damaged or unsuitable glass measuring tube on a supported AUTOOL เครื่อง
Model-Specific Selection
Selection starts with the exact CT-series model and machine revision rather than the general product family.
Scale Confirmation
Support checks the visible scale marking so the selected tube matches the required measurement version.
Photo-Assisted Fitment
Nameplate and old-tube photos give the support team the visual information needed to identify the replacement.
Independent Accessory Identity
The listing covers a glass tube replacement and does not include the complete cleaner and tester machine.
รับประกัน 3 ปี
ตัวเครื่องหลัก: รับประกัน 3 ปี อุปกรณ์เสริมมาตรฐาน: รับประกัน 1 ปีนโยบายการรับประกัน
วิธีใช้
Identify the Bench, Compare the Tube, Install, and Check
ความคืบหน้าทีละขั้นตอน1 / 5
01
Record the Machine
ถ่ายภาพ AUTOOL model nameplate and note the exact CT model and any version information.
02
Photograph the Old Tube
Capture the full tube, both ends and a clear close-up of the scale marking.
03
Confirm the Selection
Send the model and photos to support, then confirm capacity/scale, fitment, quantity and order option before payment.
04
Inspect the Replacement
Compare the received tube with the confirmed order and old part before removing packaging or installing it.
05
Replace and Verify
Drain and isolate the machine according to its service instructions, install without forcing the glass, and check sealing and operation before measurement work.
ความปลอดภัยและความเข้ากันได้
Depressurize, Drain, and Protect the Glass During Service
การจัดการแก้ว
Wear eye and hand protection, handle the tube gently and do not install chipped, cracked or damaged glass.
Drain and Isolate
Remove test fluid, isolate power and release any pressure before opening the machine or replacing the tube.
Exact Fit Required
Do not force a tube or seal that does not match the confirmed machine version.
ตรวจสอบการรั่วไหล
After installation, check seals and controlled return/drain operation before relying on readings.
Verify the Replacement Tube
Install the replacement tube, then follow the machine’s verification procedure before using its readings for measurement.
การเลือกหลอด
Match Tube Geometry, Scale, and Bench Model
คู่มือรุ่น
Choose one or more options. Known Model and Scale is selected by default.
เลือก 1 รุ่น
ยังไม่ได้เลือกโมเดล โปรดเลือกโมเดลเพื่อเปรียบเทียบ
| เลือกให้เหมาะสมกับงานของคุณ | Known Model and Scale | Known Model, Unclear Scale | Unclear Machine Version |
|---|---|---|---|
| Identification & Order | |||
| ข้อมูลที่จะให้ | Model, scale and old-tube photo | Model plus clear old-tube photos | Nameplate, machine and old-tube photos |
| Order action | โปรดยืนยันก่อนสั่งซื้อ | Ask support to identify the scale | Ask support to identify model and part |
| อย่าถือสา | Same model always uses one revision | Visual similarity proves scale | Any CT tube will fit |
คู่มือและไฟล์ดาวน์โหลด
Use the Manual for Tube Fit and Replacement
CT Measuring Tube Manual & Guides
Visit the manual download center to find host-bench manuals plus measuring-tube compatibility, scale and position fit, installation, safety, and troubleshooting guidance before replacement.
แพ็คเกจ
มีอะไรบ้าง
- Selected Glass TubeThe confirmed replacement glass-tube option and quantity stated in the final order.
- Complete CT Machineไม่รวม.
- Other CT AccessoriesNot included unless explicitly listed in the final order.
คำถามที่พบบ่อย
Tube Fit and Replacement Questions
Is This A Complete Fuel Injector Cleaner And Tester?
No. This listing is for an AUTOOL replacement glass measuring tube only; it does not include a complete fuel injector cleaner and tester.
Which machine options can I select?
Ordering references include CT150, CT160, CT180, CT200 and CT400. Compatibility still depends on the exact machine version and tube scale.
Why Do I Need To Confirm The Glass Tube Scale Before Ordering?
Different machine models or versions may use different glass tube scales. Confirming the scale before ordering helps ensure the replacement glass tube matches your AUTOOL injector cleaner and tester.
- Different models or revisions may use different graduations or tube configurations, so the scale marking is part of fitment.
What should I send support?
Send the exact machine model, nameplate photo, old-tube photo and a readable close-up of the scale.
Are capacity and dimensions universal?
No. Confirm the capacity, graduation and fit for the selected replacement before ordering.
Does replacing the tube calibrate the machine?
No. Install the correct part, verify sealing and follow the machine’s measurement checks before relying on results.
How Do I Match The Machine Version And Tube Scale?
Match the tube to CT150, CT160, CT180, CT200, or CT400 only after confirming the exact machine version and scale marking with support.
What Information Should I Provide To Customer Service?
Please provide your machine model, a photo of the old glass tube, and a clear photo of the scale marking if available. This helps customer service confirm the correct replacement part before shipment.
Can I Place An Order If I Am Not Sure About The Model?
Please contact customer service before ordering if you are not sure which machine glass tube you need. This helps avoid choosing the wrong replacement glass tube.
ความคิดเห็นของลูกค้า
เขียนรีวิว
Kenny Sitaram ✓ การซื้อที่ได้รับการยืนยัน -
Product is good.
Product is good. Delivered in the time they said it would
Betate ✓ การซื้อที่ได้รับการยืนยัน -
ดี
Delivery was very fast and the service was exceptional
Israel Huels ✓ การซื้อที่ได้รับการยืนยัน -
ทำงานได้ดี
ของขวัญขอบคุณ