ภาษาและสกุลเงิน
AUTOOL 48-Piece Automotive Test Lead Kit
US$69.00
Key Features
- 48-Piece Connection Kit
- Back-Probe Access
- No-Cut Current Connections
- Meter + Scope Extension
- 48-Piece Connection Kit: Add color-coded terminal leads, probes, clips, and banana adapters to compatible automotive test instruments.
- Back-Probe Access: Reach the back of fitted terminals for sensor, actuator, connector, and wiring checks.
- No-Cut Current Connections: Insert the appropriate lead into a supported current-test path without cutting or stripping the original wire.
- Meter + Scope Extension: Extend compatible multimeter, current-meter, and oscilloscope probe setups.
- 105 cm Leads + EVA Case: Add working reach with the extension leads and keep the 48-piece set organized in the portable case.
- 3- รับประกันปี ตัวเครื่องหลัก 3 ปี · อุปกรณ์เสริม 1 ปี
- 90-Day Returns สินค้าที่ส่งคืนต้องอยู่ในสภาพสมบูรณ์ภายใน 90 วัน
- ร้านค้าอย่างเป็นทางการ สินค้าแท้ · การสนับสนุนโดยตรง
AUTOOL 48-Piece Automotive Test Lead Kit · Back-Probe Set
Reach Vehicle Circuits Without Cutting Wires
Extend compatible meters and scopes into fitted vehicle connectors without unnecessary wire cutting. This 48-piece kit combines back probes, terminal leads, clips, and banana adapters for sensor, actuator, wiring, and supported current-path checks, with longer leads and an EVA case for organized workshop use.
- 48-Piece Connection Set
- 23 cm Back-Probe Leads
- 105 cm Banana Extensions
- Meter + Scope Connections
- EVA Storage Case
Key Features
48 Organized Leads, Clips and Adapters
Back-Probe Access
Use the back probe test leads at the rear of compatible fitted connectors for circuit checks, helping avoid wire cuts that can introduce damage, corrosion, or added impedance.
ไม่ต้องตัดสายไฟ
When checking current or circuit continuity, connect the circuit through the test lead kit without cutting, stripping, or removing the original wire.
Meter + Scope Extension Set
Suitable for multimeters, current meters, and oscilloscope probe extension during automotive electrical diagnosis.
Portable EVA Carrying Case
The compact case protects the measuring leads, keeps tools organized, and makes the kit easier to carry for indoor, outdoor, workshop, and field use.
Multiple Terminal Sizes
Color-coded jumper wire groups provide different terminal sizes for matching automotive connectors during electrical diagnosis.
Alligator Clip Connections
Red and black multimeter alligator clips provide clip-on connections for compatible circuit tests.
Banana Plug Adapters
Yellow and black banana plug adapters support flexible connections between compatible meters and test leads.
LED Test Lead
The kit includes an LED test lead for circuit checking alongside its probes and adapters.
23cm Probe Leads
Red and black probe leads support terminal testing, back-probing, and contact testing in narrow areas.
Potentiometer Test Leads
The 15cm potentiometer test leads use red, blue, and black wires for sensor, actuator, or variable-resistance circuit work.
105cm Extension Leads
Red and black male-to-female 4mm banana plug leads extend compatible meter or oscilloscope connections.
Jumper Wire Length
The jumper wires are 20.6 cm long.
รับประกัน 3 ปี
ตัวเครื่องหลัก: รับประกัน 3 ปี อุปกรณ์เสริมมาตรฐาน: รับประกัน 1 ปีนโยบายการรับประกัน
เวิร์กโฟลว์การบริการ
Match the Terminal Before Back-Probing
ความคืบหน้าทีละขั้นตอน1 / 5
01
Choose the Adapter
Match the connector, terminal size and probe style to the intended test point without forcing or spreading the vehicle terminal.
02
ตรวจสอบการให้คะแนน
Use the lowest input and CAT limit in the complete meter-lead-probe path and confirm the circuit is within that rating.
03
Inspect the Lead
Do not use a lead with damaged insulation, loose metal, contamination or a bent connector.
04
Connect in a Safe State
De-energize or place the circuit in the condition required by the vehicle procedure before changing adapters; keep fingers behind guards.
05
Measure and Restore
Make the supported measurement, then remove the adapters and check that the vehicle terminal and seal are restored without damage.
การใช้งานที่ปลอดภัย
Protect Connector Tension and Meter Category
The Lowest Rating Governs
The complete path is limited by the lowest rating of the meter, input terminal, fuse, lead, probe and adapter. The kit does not add a CAT or high-voltage rating.
Protect the Vehicle Terminal
Choose the matching terminal size and never force a probe into a connector; spreading or scratching a terminal can create a new intermittent fault.
Inspect Insulation and Metalwork
Do not use a lead with damaged insulation, loose exposed metal, contamination, heat damage or a bent connector.
Change Connections Safely
De-energize or place the circuit in the state required by the vehicle procedure before changing adapters, and keep fingers behind the probe guards.
ข้อบ่งชี้จำเพาะ
Test Lead and Adapter Specifications
| Specification | ความคุ้มค่า |
|---|---|
| Kit size | ชิ้น 48 |
| ประเภทสินค้า | Multimeter test-lead and probe adapter set |
คู่มือและฝ่ายสนับสนุน
ค้นหาคู่มือและคำแนะนำในการวัด
AUTOOL 48-Piece Test Lead Kit Manual & Guides
Visit the manual download center to find compatible meter or oscilloscope host guides, then confirm terminal size, probe fit, lead routing and safe back-probing connections.
บรรจุภัณฑ์
สิ่งของในแพ็คเกจชุดอะแดปเตอร์
- รวมไอเทมCase Size 26cm × 21cm × 8cm
- รวมไอเทมMain Leads Black and red test leads with banana plugs
- รวมไอเทมSpecial Leads Potentiometer test leads and bi-color LED test leads
- รวมไอเทมAdapters And Clips Banana plug adapters plus red / black 32A / 1000V clips
- รวมไอเทมProbe Leads Red and black 1.0 probe leads shown in the package list
- รวมไอเทมExtension Leads Male-to-female 4mm banana plug extension leads in black and red
- รวมไอเทมJumper Wires Black, yellow, red, and blue jumper wire groups with male and female terminal pairs
คำถามจากผู้ซื้อ
คำถามเกี่ยวกับการเชื่อมต่อและการวัดทางไฟฟ้า
อะไรคือ AUTOOL 48PCS Test Lead Set Used For?
It is used for automotive circuit diagnosis, sensor and actuator testing, electronic circuit troubleshooting, and multimeter / oscilloscope extension. It helps users track, check, measure, and repair complex vehicle circuits.
Can It Be Used On 12V And 24V Vehicles?
Yes. The kit is listed as suitable for 12V and 24V cars, RVs, trucks, ships, and other related applications.
Do I Need To Cut Wires During Testing?
No. The kit is designed to connect to compatible terminals without cutting wires; the correct adapter size and careful insertion are still required to avoid terminal damage.
Can I Use It With A Multimeter Or Oscilloscope?
Yes. It can be used as a measuring lead set or probe extension for multimeters, current meters, and oscilloscopes when the connection and circuit conditions are suitable.
Does It Come With A Carrying Case?
Yes. The 48-piece kit includes a 26 × 21 × 8 cm carrying case and a printed packing list.
What Is The Difference Between 48PCS, 68PCS, And 92PCS Kits?
The 48PCS kit is a compact professional automotive circuit test lead set. Choose the 68PCS or 92PCS kits if you need more adapters, probes, terminal coverage, or accessory options for wider diagnostic scenarios.
ความคิดเห็นของลูกค้า
เขียนรีวิว
ยังไม่มีรีวิวร่วมแบ่งปันประสบการณ์ของคุณกับผลิตภัณฑ์นี้ก่อนใคร