AUTOOL Автомобильный дымовой извещатель SDT203
US$159.00
- Pressure + Flow Monitoring
- Встроенный воздушный насос
- EVAP + System Leak Tracing
- 23 Intake Adapters
- Pressure + Flow Monitoring: View line pressure and airflow changes while adjusting output for the selected low-pressure test.
- Встроенный воздушный насос: Run smoke checks without an additional air pump or shop-air connection.
- EVAP + System Leak Tracing: Trace escaping smoke in permitted EVAP, fuel-tank, intake, exhaust, sealing, and line-fitting checks.
- 23 Intake Adapters: Use 23 included intake adapters to connect and seal varied test openings.
- Compact Hook Design: Position the compact unit near the test area with the integrated hook.
Форма запроса на загрузку...
- 3-летнюю гарантию Основной блок: 3 года · Аксессуары: 1 год
- 90-Day Returns Возврат возможен в течение 90 дней.
- Официальный магазин Оригинальная продукция · Прямая поддержка
AUTOOL SDT203 · Smoke Tester with Pressure and Flow Monitoring
Combine Pressure, Flow, and Smoke Clues
This automotive smoke machine lets you view line pressure and airflow changes while adjusting output for the selected low-pressure test, then follow escaping smoke to the leak path. Its built-in pump removes the need for shop air, 23 intake adapters help seal varied openings, and the compact hook positions the unit near permitted EVAP and vehicle-system checks.
- Встроенный насос, без использования сжатого воздуха.
- Pressure And Flow Feedback
- Adjustable Flow Output
- 23 Intake Adapters
- Положение для испытаний, закрепленное на крюке

Ключевые особенности
Built-In Pump, Pressure Gauge, and Flow Meter
Внешний манометр
The pressure gauge helps you see whether the test line is holding pressure. Stable or rising pressure usually indicates better sealing, while falling pressure may indicate a leak.
Окно расходомера
The flow meter shows airflow changes during testing, while the adjustment knob lets you control output for the test.
Ручка регулировки потока
Different vehicle lines may require different airflow settings. The adjustment knob helps control flow to protect the test system.
Дым появляется примерно через 5 секунд.
Smoke generation starts in about 5 seconds, helping users locate leaks sooner.
Встроенный воздушный насос
No additional air pump is required. The built-in pump saves setup time and helps reduce extra tool cost.
EVAP and Fuel Tank Systems
Can be used for EVAP and fuel tank leak checks with adapters that match the vehicle test port or connection.
Intake and Exhaust Checks
Helps check intake and exhaust systems, engine sealing areas, and line fittings by showing where smoke escapes.
Line & Fitting Adapter Support
The smoke hose, adapters, rubber kits, and airbag adapter help connect the unit to different line openings and fittings.
Vehicle Sealing Tests
Useful for locating suspected sealing leaks where smoke can reveal gaps, cracks, or loose fittings.
Compact Hook Design
The compact body and hook make it easy to carry, store, and position near the test area.
Защита от перегрева и перегрева
Automatic temperature protection shuts down the unit if it exceeds the operating-temperature limit, while low-temperature protection supports operation in cold environments.
Twenty-Three Intake Adapters
The SDT203 package includes 23 intake adapters; confirm the exact connection and seal for the system under test.
Гарантийное обслуживание в течение 3 лет
Основной блок: 3-летняя гарантия. Стандартные аксессуары: 1-летняя гарантия. Гарантийные условия.
Как использовать
Seal, Pressurize, Watch Flow, Add Smoke, and Inspect
Добавить испытательное масло
Fill 10–15 mL baby oil or liquid paraffin into the oil refill port before use. If too much oil is added, drain some oil out before operation.
Install the Hook and Open Airflow
Install the hook onto the hook port and position the detector securely near the test area if needed. Gently open the smoke flow control valve.
Connect the Smoke Hose
Turn off the vehicle ignition, disconnect the test line or access point, and connect the smoke hose between the smoke outlet and the line under test.
Подключите источник питания 12 В постоянного тока.
Connect the red clamp to positive (+) and the black clamp to negative (-). A fully charged 12V vehicle battery is recommended for consistent performance.
Generate Smoke and Locate Leaks
Press the Smoke Mode switch. The unit generates smoke quickly. Depending on system volume, allow about 30 seconds or longer for the test line to fill, then inspect for escaping smoke; use a light if needed.
After stopping Smoke Mode, allow the unit to blow residual smoke out of the nozzle.
Подтвердите и повторно протестируйте.
Проверьте наличие видимых путей утечки, сопоставив их с компоновкой системы, устраните обнаруженную утечку и повторите контролируемый тест. Если дым не виден, неисправность носит периодический характер или проявляется в работоспособности, продолжайте процедуру, описанную для данного автомобиля.
Безопасность и совместимость
Match Pressure, Medium, and Procedure to the System
Питание 12 В и встроенный воздушный насос
Connect SDT203 to a 12V DC vehicle battery before use. The built-in air pump provides the test airflow, so you do not need an external compressor.
Use Pressure and Flow Readings as Guides
SDT203 outputs less than 15 psi and less than 6 L/min. Use the pressure gauge and flow meter to watch the connected test path, and stay within the pressure allowed by the vehicle or component service procedure.
Adjust Airflow Gradually
Start with minimum airflow and increase only as needed for the connected line; SDT203 remains a low-pressure smoke tester.
Тестовое масло в комплект не входит.
Тестовое масло в комплект не входит. Используйте жидкий парафин или детское масло и добавьте 10–15 мл перед использованием.
Ограничьте непрерывное использование 8 минутами.
Не включайте SDT203 непрерывно более 8 минут. Автоматическая защита от перегрева отключает питание при температуре выше 75°C. Дайте устройству остыть перед повторным включением.
A/C Inspection Scope
SDT203 is a low-pressure smoke detector. Use it on an isolated A/C line section only when the service procedure permits indirect smoke inspection.
A/C Inspection Workflow
For an approved A/C inspection, isolate and pressurize the line section according to the service procedure, then use smoke only as an indirect visual aid.
Используйте дым для обнаружения утечки.
Используйте видимый дым для определения места утечки, затем устраните неисправность и проведите повторное тестирование. Если дым не появляется, перед продолжением проверьте изоляцию, поток и схему тестирования.
Respect Smoke-Test Exclusions
Keep smoke away from headlights and from any component or system where smoke testing is not permitted.
Switch Off Vehicle and Engine
Turn off the vehicle ignition and keep the engine off during vehicle leak tests.
Keep Liquids Away
Keep the unit out of water and other liquids, and do not use sticky liquids as testing oil.
Никогда не доливайте воду во время бега.
Не доливайте испытательное масло во время работы прибора SDT203.
Избегайте нагрева металлических корпусов.
Избегайте прикосновения к горячему металлическому корпусу.
Результаты тестирования
Read Pressure, Flow, and Smoke as Different Signals
Flow or Pressure Changes
Use pressure and flow behavior under the configured, sealed test setup to guide the next leak inspection step.
Видимый дымовой выброс
Убедитесь, что розетка не была сделана намеренно, затем осмотрите, отремонтируйте и повторно проверьте именно этот участок.
Отсутствует видимый дым
Перед переходом к функциональной диагностике или другому методу тестирования необходимо проверить доступ, изоляцию, состояние клапана и подачу дыма.
Сравнить модели
Compare Monitoring and Control Features
Руководство по модели
Выберите одну или несколько моделей. Модель SDT203 выбрана по умолчанию.
| Наименование | SDT50 | SDT60 | SDT100 | SDT101 | SDT102 | SDT103 | SDT106 | SDT203 | SDT205 | SDT205S | SDT206 | SDT208 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Дымообразование и защита | ||||||||||||
| Принцип работы | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода | Сгорание в условиях низкого содержания кислорода |
| Объем заполнения испытательного масла | 10-15ml | 10-15ml | 10-15ml | 10-15ml | 10-15ml | 10-15ml | 10-15ml | 10-15ml | 10-15ml | 10-15ml | 10-15ml | 10-15ml |
| Номинальное выходное давление | <10 psi | <10 psi | <10 psi | 3.2 кПа (0.46 psi) | <10 psi | 3.2 кПа (0.46 psi) | <12 psi | Номинальное выходное давление оборудования <15 psi; используйте процедуру целевой системы. | <15 psi | <15 psi | <18 psi | <10 psi/35 psi |
| Номинальный выходной поток | <5 л/мин | <5 л/мин | <5 л/мин | > 10 л / мин | > 6 л/мин | > 10 л / мин | <5 л/мин | <6 л/мин | <6 л/мин | <6 л/мин | <6 л/мин | <15 л/мин |
| Защита от высоких температур | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. | Перестаёт работать при температуре выше 75°C. |
| Время отклика | Образует дым за 5 секунд. | Образует дым за 5 секунд. | Образует дым за 5 секунд. | Образует дым за 5 секунд. | Образует дым за 5 секунд. | Образует дым за 5 секунд. | Образует дым за 5 секунд. | Образует дым за 5 секунд. | Образует дым за 5 секунд. | Образует дым за 5 секунд. | Образует дым за 5 секунд. | Образует дым за 5 секунд. |
| Мощность и физические размеры | ||||||||||||
| Входная мощность | 12В | 12В | 12В | DC12V / 5A | 12В | DC12V / 5A | 12В | 12В | 12В | 12В | 12В | DC12V / 24V |
| Номинальная мощность | 50 Вт | 50 Вт | 50 Вт | 48 Вт | 48 Вт | 48 Вт | 50 Вт | 65 Вт | 65 Вт | 65 Вт | 70 Вт | 80 Вт |
| Вес нетто (основной блок) | 1.5кг | 1.6кг | 1.6кг | 1.6кг | 1.6кг | 1.15кг | 3.5кг | 1.7кг | 3.2кг | 3.2кг | 3.5кг | 4.2кг |
| Размеры основного блока | 145mm * 80mm * 200mm | 145mm * 80mm * 200mm | 180mm * 102mm * 143mm | 180mm * 100mm * 135mm | 180mm * 102mm * 143mm | 180mm * 100mm * 135mm | 110mm * 135mm * 210mm | 145mm * 80mm * 200mm | 295mm * 295mm * 207mm | 295mm * 295mm * 207mm | 150mm * 150mm * 275mm | 350mm * 250mm * 300mm |
| Мониторинг и контроль | ||||||||||||
| Окно расходомера | × | × | × | × | × | ✓ | × | ✓ | × | ✓ | ✓ | ✓ |
| Манометр | × | ✓ | × | × | ✓ | × | × | ✓ | ✓ | ✓ | ✓ | ✓ |
| Тип источника воздуха | Встроенный воздушный насос | Встроенный воздушный насос | Встроенный воздушный насос | Внешний источник воздуха | Встроенный воздушный насос | Внешний источник воздуха | Встроенный воздушный насос | Встроенный воздушный насос | Встроенный воздушный насос | Встроенный воздушный насос | Встроенный воздушный насос (2 шт.) | Встроенный воздушный насос |
| режим вывода | Режим дыма | Режим дыма | Режим дыма | Режим дыма | Режим дыма | Режим дыма | Режим дыма | Режим дыма | Воздушный режим Режим дыма | Воздушный режим Режим дыма | Воздушный режим Режим дыма | Воздушный режим Режим дыма |
| Двойной режим давления | × | × | × | × | × | × | × | × | × | × | × | Стандартные режимы работы машины: 35 psi / EVAP 10 psi; используйте процедуру, описанную для транспортного средства. |
| Ручка регулировки потока | × | × | × | × | × | ✓ | × | ✓ | × | ✓ | ✓ | ✓ |
| Клапан слива масла | × | × | × | × | × | × | × | × | ✓ | ✓ | ✓ | ✓ |
| Световой индикатор неисправности | × | × | ✓ | × | ✓ | × | × | ✓ | ✓ | ✓ | ✓ | ✓ |
| Датчик уровня масла | × | × | × | × | × | × | × | × | × | × | ✓ | ✓ |
Руководство и загрузки
Для настройки и проверки давления используйте руководство пользователя.

AUTOOL Руководство пользователя SDT203
Open the PDF manual for SDT203 pressure and flow monitoring, smoke-output adjustment, adapter sealing, test-oil handling, operating safety, and troubleshooting.

Упаковка
В Комплект включено:
- Основной блокAUTOOL Детектор утечки дыма SDT203
- Розничная коробкаSDT203 retail box
- Силовой кабель12V battery clamp cable
- Дымовой шлангSmoke output hose for connecting to the line under test
- адаптерыCone adapter, airbag adapter, straight adapter, hook, funnel, and accessories
- ДокументацияРуководство пользователя
Часто задаваемые вопросы (FAQ)
Pressure, Flow, and Smoke Questions
Какое испытательное масло следует использовать для SDT203?
Use liquid paraffin or baby oil as the testing oil. Use dedicated smoke-testing oil if available; otherwise use the approved alternative specified for this model. Do not use water or sticky liquid.
Сколько тестового масла нужно добавить?
Add 10–15 mL testing oil before use and do not overfill. Refill only when the smoke becomes thin, and do not add more than 15 mL at one time. Before adding fresh oil, drain remaining old oil from the detector. If too much oil is added accidentally, drain some oil out before operation.
Can SDT203 Detect EVAP Leaks?
Да. AUTOOL Детекторы утечек дыма позволяют проверить герметичность систем EVAP. Используйте адаптер EVAP или сервисный инструмент, соответствующий тестовому порту автомобиля.
Можно ли с помощью SDT203 напрямую проверить герметичность автомобильной системы кондиционирования воздуха?
No. Automotive A/C systems are high-pressure systems, while SDT203 is a low-pressure smoke leak detector with <15 psi rated output pressure. It cannot directly pressure-test the automotive A/C system for leaks. Use smoke only to help inspect an A/C line section after isolating and pressurizing it according to the service procedure.
Как дым может помочь обнаружить утечку в отдельном участке трубопровода кондиционера?
First isolate and pressurize the A/C line segment according to the vehicle or A/C service procedure. Then apply smoke along the line and observe whether escaping airflow disturbs the smoke. If escaping air moves the smoke, inspect that area for a possible leak.
Какие системы может протестировать SDT203?
For automotive diagnostics, SDT203 supports low-pressure checks for EVAP, intake, exhaust, and fuel tanks. It can also check vehicle-sealing areas, engine sealing areas, and line fittings when the test point can be sealed safely.
Какой блок питания необходим для SDT203?
SDT203 uses 12V DC vehicle battery power. Connect the red clamp to positive (+) and the black clamp to negative (-). A fully charged 12V vehicle battery is recommended for consistent performance.
Можно ли отрегулировать давление на SDT203?
SDT203 uses fixed output below 15 psi. Its flow adjustment knob controls airflow, not pressure mode. If separate Standard and EVAP pressure modes are required, compare SDT208.
Какие аксессуары входят в комплект?
Check the product listing or your selected package option for the exact items included. The package includes the main unit, retail box, 12V battery clamp cable, smoke hose, cone adapter, airbag adapter, hook, funnel, adapter, and user manual. Testing oil is not included.
Процесс AUTOOL Чем отличаются модели дымовых извещателей?
- SDT203: built-in pump, pressure gauge, flow window, and flow adjustment.
- External-air EVAP: SDT103.
- Other built-in options: SDT106 Smoke Mode; SDT205/205S Air + Smoke; SDT206 dual pumps; SDT208 35 psi Standard / 10 psi EVAP.
Also compare output flow, gauges, oil controls, and accessories.
Каков срок гарантии на SDT203?
Основной блок: 3-летняя гарантия. Стандартные аксессуары: 1-летняя гарантия. Гарантийные условия.





























Ясир ✓ Подтвержденная покупка –
Lillian, do you know who he is?
Lillian, do you know who he is?
The best sales representative I’ve ever dealt with.
One of the best companies I’ve ever bought from.
High-quality, unique tools—and this isn’t the first time I’ve bought from them.
Fast response and communication.
Shipping and packaging are the best I’ve ever seen—top-notch.
This wasn’t the first time I’ve bought from them, and it won’t be the last.
I’m writing this review with complete confidence.
Bishop Warren ✓ Подтвержденная покупка –
Arrived quickly, well packaged, and feels sturdy.
Arrived quickly, well packaged, and feels sturdy. Works well. Immediately identified a leak from the throttle body. Very useful tool. Doesn’t come with oil though – you need to order that separately.
David ✓ Подтвержденная покупка –
I’ve struggled with EVAP leaks for months until I got this AUTOOL smoke…
I’ve struggled with EVAP leaks for months until I got this AUTOOL smoke detector. Setup is a breeze, and smoke starts in seconds. The external gauges take the guesswork out of testing—I can see exactly if there’s a leak. No extra air pump needed, which saves time and money. It’s small, lightweight, and easy to store, plus the included adapters fit all my vehicles. The safety features are top-notch, and it works on my car, motorcycle, and ATV. If you need to find leaks quickly, this is the tool to buy!