ЯЗЫК И ВАЛЮТА
AUTOOL Аппарат для промывки и замены системы охлаждения SC611
US$3,999.00
Ключевые особенности
- One-Button Coolant Exchange
- Equal-Volume Exchange
- Vacuum Test + Fill
- 25 L New/Used Tanks
- One-Button Coolant Exchange: Run coolant circulation, old-fluid recovery, and new-fluid delivery through one automatic control cycle.
- Equal-Volume Exchange: Deliver new coolant while recovering old coolant to support a balanced exchange process.
- Vacuum Test + Fill: Use separate vacuum-hold and vacuum-fill modes for sealing checks and air-controlled refilling on compatible systems.
- 25 L New/Used Tanks: Monitor new and used coolant in separate 25 L tanks with real-time level display.
- No Air Compressor Needed: Power the electric-pump system from AC 100–240 V without a separate compressed-air supply.
☰ ЗАПРОСИТЬ ОПТОВОЕ ПРЕДЛОЖЕНИЕ / B2BОфициальный запрос на коммерческое предложение
Форма запроса на загрузку...
- 3-летнюю гарантию Основной блок: 3 года · Аксессуары: 1 год
- 90-Day Returns Возврат возможен в течение 90 дней.
- Официальный магазин Оригинальная продукция · Прямая поддержка
AUTOOL SC611 · 25 L Coolant Flush & Exchange Machine
Automate Coolant Recovery and Equal Exchange
Automate coolant circulation, equal-volume exchange, old-fluid recovery, and new-fluid delivery with one controlled workshop cycle. Separate vacuum-hold and vacuum-fill modes support sealing checks and air-controlled refilling on compatible vehicle procedures, while dedicated new- and used-coolant tanks show fluid levels in real time. The electric-pump system works without an external air compressor.
- Automatic Coolant Exchange
- 25 L New + Used Tanks
- Vacuum-Hold + Vacuum Fill
- AC 100–240 V Input
- No Air Compressor Required
Ключевые особенности
Control Exchange, Vacuum Test and Refill
One-Button Automatic Exchange
The control cycle manages coolant delivery and recovery without repeated manual switching.
Circulation Flush Mode
The electric-pump circuit circulates compatible coolant through the connected service route.
Balanced New / Used Coolant Exchange
New coolant is delivered while old coolant is recovered to support a balanced exchange process.
Vacuum-Hold Test
A dedicated vacuum-hold mode helps check whether the connected cooling system maintains vacuum.
Vacuum Fill Mode
Vacuum-assisted filling supports compatible cooling systems where trapped air is a service concern.
Real-Time Fluid Levels
The machine displays new- and used-coolant tank levels during service.
Давление и контроль потока
Controlled flow works with overload protection during the exchange cycle.
No External Air Compressor
The electric-pump design uses AC power without a separate compressed-air supply.
Гарантийное обслуживание в течение 3 лет
Основной блок: 3-летняя гарантия. Стандартные аксессуары: 1-летняя гарантия. Гарантийные условия.
Как использовать
Vacuum-Hold Test, Exchange or Fill the Cooling System
Шаг вперед1 / 5
01
Cool and Identify the System
Allow the vehicle cooling system to cool, identify the specified coolant and confirm the supported service route.
02
Prepare Tanks and Connections
Load the correct new coolant, keep the recovery side ready and seal the matching adapters and hoses.
03
Run Vacuum-Hold if Required
Use the vacuum-hold mode to check the sealed circuit before filling when the vehicle procedure calls for it.
04
Select Exchange or Vacuum Fill
Start the one-button exchange cycle or vacuum-fill mode and monitor pressure, flow and both tank levels.
05
Restore and Verify
Disconnect the machine, restore the vehicle circuit, complete the vehicle bleed procedure and verify the final coolant level and leak status.
Безопасность и совместимость
Work Cold and Match the Service Port
Open Only When Cool
Do not open or connect a pressurized hot cooling system.
Match the Coolant
Use the coolant chemistry and mixture specified for the vehicle; keep recovered coolant separate.
Confirm the Service Route
Verify that the vehicle procedure supports the selected exchange or vacuum-fill connection.
Check Every Seal
Inspect adapters, hoses and tank connections before applying vacuum or starting flow.
Complete Vehicle Bleeding
Complete the model-specific bleed, heater-circuit and final-level checks after filling or exchange.
Характеристики
Tank, Power and Air Supply Requirements
| Параметр | Значение |
|---|---|
| Емкость бака | 25 L new/used tanks |
| Электропитание | 100–240 В переменного тока |
| Оценка мощности | 15 W |
| Внешний воздушный компрессор | Не требуется |
Руководство и поддержка
Confirm Adapters and Service Setup
AUTOOL SC611 Manual & Guides
Visit the manual download center to find SC611 guidance for coolant circulation, equal-volume exchange, vacuum testing and filling, plus operating safety and troubleshooting support.
Комплектация
Check Adapters, Hoses and Included Parts
- Основной блокAUTOOL SC611 cooling-system flush and exchange machine
- Конфигурация заказаConfirm hoses, adapters, power cord and documentation included with the selected version before purchase
Часто задаваемые вопросы (FAQ)
Cooling-System Fit and Service Questions
What service is SC611 designed for?
The machine manages coolant circulation, equal-volume exchange, old-fluid recovery, new-fluid delivery, vacuum-hold checks and vacuum-assisted filling through a compatible service route, without repeated manual switching during the exchange cycle.
How should I confirm vehicle compatibility?
Verify that the vehicle procedure supports the selected exchange or vacuum-fill connection.
Does the machine replace the vehicle bleeding procedure?
After filling or exchange, complete the vehicle-specific bleed, heater-circuit, and final-level checks.
Какое напряжение мне следует заказать?
Choose the AC version that matches the workshop supply and verify the machine label before use.
How should I prevent coolant mixing?
Use the coolant chemistry and mixture specified for the vehicle; keep recovered coolant separate.
Отзывы клиентов
Оставить отзыв
Нет отзывовПоделитесь своим опытом использования этого продукта первыми.