ЯЗЫК И ВАЛЮТА
AUTOOL BT960 Lithium and Lead-Acid Battery Analyzer
US$139.00
Ключевые особенности
- Lead-Acid + Lithium Testing
- 12V/24V System Checks
- 0–10 A Current Range
- Negative-Side Drain Monitoring
- Lead-Acid + Lithium Testing: Test flooded, AGM, EFB, and GEL lead-acid batteries plus lithium iron phosphate, lithium polymer, and ternary lithium types.
- 12V/24V System Checks: Run battery, cranking, charging, and loaded-system voltage checks on supported 12V/24V systems.
- 0–10 A Current Range: Measure current across 0–10 A while following the supported 12 V or 24 V system procedure.
- Negative-Side Drain Monitoring: Monitor small total-current changes through the negative-side connection to investigate abnormal battery drain.
- Customizable Printed Reports: Print test reports with license plate numbers, dates, and serial numbers from the built-in thermal printer.
☰ ЗАПРОСИТЬ ОПТОВОЕ ПРЕДЛОЖЕНИЕ / B2BОфициальный запрос на коммерческое предложение
Форма запроса на загрузку...
- 3-летнюю гарантию Основной блок: 3 года · Аксессуары: 1 год
- 90-Day Returns Возврат возможен в течение 90 дней.
- Официальный магазин Оригинальная продукция · Прямая поддержка
AUTOOL BT960 · Automotive Battery Tester with Printer & Leakage Monitor
Monitor Battery Condition, Leakage and Results
Test supported lead-acid and listed lithium battery types, then check cranking, charging, loaded-system voltage, current, and leakage behavior on 12V/24V systems. BT960 records small-current waveforms for drain investigations and prints customizable reports with vehicle and test details for workshop documentation.
- Lead-Acid And Listed Lithium Menus
- 12 V / 24 V System Checks
- 0–10 A Current Range
- Drain-Current Waveform Records
- Customizable Printed Reports
Ключевые особенности
Battery Checks, Leakage Monitoring and Printout
Battery & System Tests
Select the battery-test function, choose the status and mode as needed, and follow the on-screen prompts for battery, startup/cranking, charging, running system-voltage behavior with vehicle electrical loads switched on, voltage, current, leakage, and data-record checks on supported 12V and 24V battery systems. The listed current measurement range is 0–10A. The menu is not a traditional high-current resistive battery load test.
Lead-Acid Coverage + Voltage Range
Test supported Regular-Flooded, AGM Spiral, AGM Flat Plate, EFB, and GEL lead-acid battery categories. The 0–80V voltage measurement range is separate from battery health-test compatibility and does not by itself qualify a non-battery or high-voltage system for testing.
Lithium Battery Coverage
Test supported lithium iron phosphate, lithium polymer, ternary lithium, iron-lithium, polymer-lithium, and other listed lithium battery options. Match the battery to the supported test setting; the tester displays the current value after the test.
Battery Drain and Leakage-Current Monitoring
Monitor small changes in total current through the negative-side connection to investigate battery drain, abnormal standby current, and charging-related issues. Follow the vehicle sleep and power-retention procedure, then isolate circuits to identify the responsible branch or component.
Мониторинг температуры в реальном времени
The built-in sensor tracks ambient temperature to provide context for battery testing. A battery working temperature of 20°C–25°C is generally recommended; follow the actual battery procedure and do not assume the display automatically compensates results.
Customizable Printed Reports
Use the built-in ink-free thermal printer to print battery-test reports on site, add license plate numbers, dates, and serial numbers, and attach the record to a work order or share it with the customer.
14 Языков
Supports English, Portuguese, Spanish, French, German, Italian, Russian, Turkish, Thai, Japanese, Traditional Chinese, Simplified Chinese, Korean, and Polish.
Battery Rating Systems
Select the battery rating system that matches the battery label, including BCI, SAE, CCA, IEC, EN, CA, DIN, MCA, JIS, and GB.
3.2-дюймовый цветной дисплей
Read test results, menus, and diagnostic prompts on the 3.2-inch color screen.
Waveform + Specification Reference
Review the voltage waveform and battery specifications table as references for more detailed checks.
Защита от обратного подключения
Reverse-polarity protection and insulated test clips help protect the battery and tester if positive and negative connections are reversed. Use the correct terminal connection and stop if the tester reports a polarity error.
Гибкий источник питания
Power the tester with four AAA batteries or a Type-C 5V / 1A supply.
Integrated Handheld Design
The 214 × 98 × 40mm body integrates the thermal print port, 3.2-inch color screen, return/power key, print key, OK key, direction keys, electric clamps, control buttons, and battery compartment.
Гарантийное обслуживание в течение 3 лет
Основной блок: 3-летняя гарантия. Стандартные аксессуары: 1-летняя гарантия. Гарантийные условия.
Сервисный рабочий процесс
Run Each Battery Check in Its Proper State
Шаг вперед1 / 6
01
Leakage Test Workflow
After correctly connecting the power clamps to the battery terminals, disconnect the negative terminal and use the special leakage test clamp on the vehicle negative bus to monitor and record real-time leakage current waveform.
02
Определите батарею
Confirm the battery chemistry, nominal voltage and printed rating standard before choosing the tester menu.
03
Подключите правильно
Switch vehicle loads off as required, place the clamps on clean terminals with correct polarity, and make sure the contact is stable.
04
Enter the Rating
Select the supported battery type and enter the rating standard and value printed on the battery; an Ah field is an input unless the procedure defines a controlled discharge test.
05
Run Separate Checks
Run the supported battery, cranking, charging or loaded-system checks separately so each result keeps its operating context.
06
Review and Record
Read measured voltage and algorithm outputs together, record the conditions, and confirm an unexpected result with terminal, charge-state and vehicle-specific checks.
Безопасное использование
Match Chemistry, Voltage and Test State
Battery Fit and Leakage Test State
Match the selected menu to the exact battery chemistry, nominal voltage, series arrangement, rating standard, and BMS-permitted test state. For leakage-current monitoring, use the documented negative-side connection and the vehicle’s sleep and power-retention procedure; finding the responsible circuit requires a separate isolation workflow. Treat CCA, SOC, health/life, and capacity-like values as algorithm outputs rather than measured amp-hours or exact remaining life.
Руководство по результатам
Interpret Battery Results in Context
Измеренное напряжение
Assess battery health by combining voltage with state of charge, temperature, terminal contact, and the full test result.
CCA or Conductance Output
Compare the tester’s algorithm output with the rating standard and value entered from the battery label. Repeat unexpected results after checking terminal contact and charge state.
SOC and Health/Life
Treat SOC and health, life or capacity-like percentages as model-generated indicators rather than measured remaining amp-hours or an exact service-life forecast.
Cranking and Charging
Keep cranking voltage, running-system voltage and loaded-system observations separate. Use the vehicle procedure and operating state to decide the next check.
Сравнение моделей
Choose the Right Battery System Tester
Руководство по модели
Choose one or more models. BT960 is selected by default.
Выбрана 1 модель
Модель не выбрана. Выберите модель для сравнения.
| Наименование | BT360 | BT460 | BT760 | BT880 | BT960 |
|---|---|---|---|---|---|
| Tests, Monitoring & Protection | |||||
| Тест батареи | ✓ | ✓ | ✓ | ✓ | ✓ |
| Проверка проворачивания | ✓ | ✓ | ✓ | ✓ | ✓ |
| Проверка системы зарядки | ✓ | ✓ | ✓ | ✓ | ✓ |
| Заряд батареи | × | × | × | × | × |
| Защита обратной полярности | ✓ | ✓ | ✓ | ✓ | ✓ |
| Испытание на максимальную нагрузку | × | ✓ | ✓ | ✓ | ✓ |
| Тепловой монитор | × | × | × | ✓ | ✓ |
| Мониторинг тока утечки | × | × | × | ✓ | ✓ |
| Battery Compatibility & Ranges | |||||
| Conventional Lead-acid Batteries | ✓ | ✓ | ✓ | ✓ | ✓ |
| AGM Flat Plate Batteries | ✓ | ✓ | ✓ | ✓ | ✓ |
| Спиральные AGM-аккумуляторы | ✓ | ✓ | ✓ | ✓ | ✓ |
| Гелевые батареи | ✓ | ✓ | ✓ | ✓ | ✓ |
| EFB Enhanced Flooded Batteries | ✓ | ✓ | ✓ | ✓ | ✓ |
| Литиевые батареи | × | × | × | × | ✓ |
| Test Range(CCA) | 30~2000 ОСО | 30~2000 ОСО | 30~2000 ОСО | 30~2000 ОСО | 30~2000 ОСО |
| Applicable Battery Rated Voltage | 12V | 12V / 24V | 12V / 24V | 12V / 24V | 12V / 24V |
| Диапазон измерения напряжения | 8–20 В | 8 ~ 30V | 8 ~ 30V | 8 ~ 30V | 0 ~ 80V |
| Interface, Records & Power | |||||
| Печать данных | × | × | ✓ | ✓ | ✓ |
| Записи данных | ✓ | ✓ | ✓ | ✓ | ✓ |
| Обновление программного обеспечения | ✓ | ✓ | × | ✓ | ✓ |
| Цветной экран | ✓ | ✓ | ✓ | ✓ | ✓ |
| Размер экрана | 2.4 дюйма | 2.8inch | 3.2 дюйма | 3.2 дюйма | 3.2 дюйма |
| Многоязычная | 14 | 14 | 14 | 18 | 14 |
| Электропитание | Connect 12V Battery | Connect 12V Battery | Connect 12V Battery | Connect 12V Battery | Сухая батарея Type-c Power Supply Connect 12V Battery |
Руководство и поддержка
Find the User Manual and Product Support
AUTOOL Руководство пользователя BT960
Откройте руководство в формате PDF для AUTOOL BT960 lead-acid and lithium battery testing, leakage and temperature monitoring, report printing, power options, safety and troubleshooting support.
Комплектация
Посмотрите, что входит в комплект.
- Основной блокAUTOOL BT960 battery tester analyzer
- ДокументацияРуководство пользователя
- ПараметрPrinting Thermal paper roll for the built-in printer
- ПараметрTest Cable Main clamp cable for battery testing
- ПараметрLeakage Test Yellow leakage test cable / special clamp
- ПамятьStorage bag and retail box
Вопросы покупателя
Battery Test, Fit and Result Questions
Does BT960 Support Lithium Battery Testing?
Yes. BT960 supports iron lithium, polymer lithium, and ternary lithium battery test options. Select the menu that matches the battery chemistry, nominal voltage, series arrangement, and BMS-permitted test state before testing.
Can BT960 Monitor Battery Leakage Current?
Yes. BT960 monitors small changes in total current through its negative-side connection, helping technicians investigate battery drain, abnormal standby current, and charging-related issues. Follow the vehicle sleep and power-retention procedure; locating the responsible branch or component requires circuit isolation.
Does BT960 Have A Built-In Printer?
Yes. BT960 includes a built-in thermal printer. It can print test results with customizable license plate numbers, dates, and serial numbers, making it useful for work orders and customer reports.
What Voltage Range Can BT960 Measure?
BT960 supports a 0-80V voltage measurement range.
What Current Range Can BT960 Measure?
BT960 supports a 0-10A current measurement range.
Does BT960 Support 12V And 24V Battery Systems?
Yes. BT960 is suitable for 12V and 24V battery systems. Match the selected battery menu, chemistry, nominal voltage, and rating input to the battery or vehicle-system task; the 0–80V measurement range does not authorize high-voltage battery service.
Какие языки поддерживаются?
BT960 supports 14 languages: English, Portuguese, Spanish, French, German, Italian, Russian, Turkish, Thai, Japanese, Traditional Chinese, Simplified Chinese, Korean, and Polish.
Что входит в комплект?
Package contents: BT960 main unit, retail box, user manual, thermal paper roll, main clamp cable, yellow leakage-test cable / special clamp, and storage bag.
Отзывы клиентов
Оставить отзыв
Chantland ✓ Подтвержденная покупка –
AUTOOL BT960 is a lifesaver for my auto shop!
AUTOOL BT960 is a lifesaver for my auto shop! It does battery, startup, and leakage tests perfectly. The real-time temperature monitoring makes results accurate, and the thermal printer lets me print reports for customers easily. Worth every cent!
Paul ✓ Подтвержденная покупка –
This tool is my go-to battery doctor!
This tool is my go-to battery doctor! It supports all battery rating systems, so it works with every vehicle I service. The real-time temp monitoring ensures accurate tests even in hot or cold weather. Highly recommend!
Стив ✓ Подтвержденная покупка –
The BT960 has all the functions I need—battery, charging, load, and leakage…
The BT960 has all the functions I need—battery, charging, load, and leakage tests. The 14 languages are a big plus for my international customers, and the printer makes record-keeping a breeze. Solid tool!